Best knife oil

[Folgore1]

Was wondering what everyone uses for knife oil/rust prevention?

i myself use Hoppe's gun oil or BreakFree oil, not sure why this happened but i got a bottle of Latama oil (quick release) used it on all my automatic knives and worked great and thought cool no more problems with them knives well few months go by i get some of the knives back out and none will work anymore , the quick relese had gummed up and was really causing lots problems with every knife i used it on as none of them would open fully anymore , i had to completely remove the Quick release oil then re-oil them with Hoppes. not sure why the oil gummed up on every knife i had im thinking its where i live or basicly my location , quick release was made by my good friend Tank (Mike Fisher) and was made in Texas where its hot all the time , for some reason it did not work well on my knives i used it on . possible it works great in hotter climates and not so good in cooler climates ? hey hope this helps in your search man

[rea1eye]

I have found out on older used knives the Quick Release Oil
tends to stiffen after a few months. I wonder if it is
because there still is some residue in the joints ( I
don’t completely take the knife apart).

Bob

[bestgear]

Wow, I’ve only heard the praises of QR oil, never any negatives. Good to know

[Potrzebie]

Myself, I've never been disappointed by 3-In-One. I suggest, however, that if you're maybe going to use your knife on food, download the material safety data sheet for your chosen product. In the case of 3-In-One, the MSDS says that the oral toxicity is essentially negligible. You don't want to drink the stuff, but the amount that will transfer from a clean, well-wiped blade isn't going to poison anyone.

[Ripster]

I have found out on older used knives the Quick Release Oil
tends to stiffen after a few months. I wonder if it is
because there still is some residue in the joints ( I
don’t completely take the knife apart).

Bob

Bob, have found the same thing regarding Quick release. With my 100 plus year old Camillus to the Kershaw Leeks that I EDC , the QR oil gets stiff and gummy. So went back to 3 in 1 oil about a year ago. Maybe it’s great stuff in Texas , as has been posted, but up here in Wi. I won’t use it again .

[Ripster]

Myself, I've never been disappointed by 3-In-One. I suggest, however, that if you're maybe going to use your knife on food, download the material safety data sheet for your chosen product. In the case of 3-In-One, the MSDS says that the oral toxicity is essentially negligible. You don't want to drink the stuff, but the amount that will transfer from a clean, well-wiped blade isn't going to poison anyone.

Thanks for sharing this. Switched back to 3 in 1 awhile ago and very happy with results.

[Railsplitter]

Myself, I've never been disappointed by 3-In-One. I suggest, however, that if you're maybe going to use your knife on food, download the material safety data sheet for your chosen product. In the case of 3-In-One, the MSDS says that the oral toxicity is essentially negligible. You don't want to drink the stuff, but the amount that will transfer from a clean, well-wiped blade isn't going to poison anyone.

I assume that is probably the case with most lubricants. Accidentally ingesting such a tiny amount isn’t likely to cause any real damage. But then, I have a cast iron stomach.

I would be more concerned about the awful taste than anything else.

[227UH]

I've been using 3-in-one for over 20 years. It works, but I don't like the smell.

[GSPTOPDOG]

I don't believe that there is a "best" oil for knives.
Quick-Release works like magic on the pivot points.
Machine oil is good as a protectant, but you don't want to slice and eat an apple with that on the blades!
Mineral oil can work well as a blade protectant, but it evaporates quickly and must be re-applied more often.
You may also try a wax paste, like Mother's Mag polish, or even a carnuba was for cars.

There are many choices. Try a few, and find what works best for you, in the way that you use your knife!

Rev, have you ever tried using compressor oil? I have a fair quantity of it, recycled from dismantled compressors and I have just started using it on a couple of folding knives, it is pretty light but so far so good. I have not tried on any of my autos.

[Reverand]

I don't believe that there is a "best" oil for knives.
Quick-Release works like magic on the pivot points.
Machine oil is good as a protectant, but you don't want to slice and eat an apple with that on the blades!
Mineral oil can work well as a blade protectant, but it evaporates quickly and must be re-applied more often.
You may also try a wax paste, like Mother's Mag polish, or even a carnuba was for cars.

There are many choices. Try a few, and find what works best for you, in the way that you use your knife!

Rev, have you ever tried using compressor oil? I have a fair quantity of it, recycled from dismantled compressors and I have just started using it on a couple of folding knives, it is pretty light but so far so good. I have not tried on any of my autos.

No sir, I have not thought of that.
I may try it sometime.

[GSPTOPDOG]

No sir, I have not thought of that.
I may try it sometime.

I don't know personally ... yet, but I have that it is a very high-quality oil overall.

[cudgee]

I don't believe that there is a "best" oil for knives.
Quick-Release works like magic on the pivot points.
Machine oil is good as a protectant, but you don't want to slice and eat an apple with that on the blades!
Mineral oil can work well as a blade protectant, but it evaporates quickly and must be re-applied more often.
You may also try a wax paste, like Mother's Mag polish, or even a carnuba was for cars.

There are many choices. Try a few, and find what works best for you, in the way that you use your knife!

Rev, have you ever tried using compressor oil? I have a fair quantity of it, recycled from dismantled compressors and I have just started using it on a couple of folding knives, it is pretty light but so far so good. I have not tried on any of my autos.

I tried that years ago, been using it ever since. As you say, light and does not gum up. You're onto something.

[GSPTOPDOG]

Rev, have you ever tried using compressor oil? I have a fair quantity of it, recycled from dismantled compressors.

I tried that years ago, been using it ever since. As you say, light and does not gum up. You're onto something.

Cheers mate ... Good to get the John Dory on that cudgee , I'll try it on my autos next.