RIP Weird Studio

A place to discuss & share pictures of anything that relates to knives.
ThatWeirdKnifeGuy
Gold Tier
Gold Tier
Posts: 1666
Joined: Tue Jul 25, 2023 8:20 pm
Location: Wisconsin

RIP Weird Studio

Post by ThatWeirdKnifeGuy »

I came home from running errands to find my freezers water supply line for the ice maker spraying water everywhere. It ran through where the floor meets the wall and poured through the basement ceiling right onto....my workshop. A.k.a the Weird Studio. There's water pouring through this 100 year old piano, my desk has pooled water in the top row of drawers, my printer's drawer that's full of knives and HUNG ON THE WALL!

I'm still attempting to dry it all and assess the damage. Hundreds of knives are wet. Carbon steel and water don't mix well ::undecided::

And the leather. Oh man the leather. And my old silverware chests that'll never be tarnish proof again ::teary_eyes::

My only power tool that I'll use for cutlery, my beloved cordless dremel, chucked its last bit. ::mdm::

Im what you'd call "bummed out".
Attachments
20250822_172314.jpg
20250822_160450.jpg
20250822_171124.jpg
20250822_170809.jpg
20250822_170750.jpg
20250822_170758.jpg
::nod:: https://newlifeknives.etsy.com ::nod::

That's my Etsy store where I sell old knives and sometimes handmade knife accessories to support my knife habbit. Thanks for looking my friend. ::tu::
User avatar
Rookie
Gold Tier
Gold Tier
Posts: 2226
Joined: Mon Oct 24, 2005 12:13 pm
Location: Meadville, PA

Re: RIP Weird Studio

Post by Rookie »

Oh wow, that's quite an ordeal. Sorry to see you going through that. Stupid little water line sure caused a big headache.
Carl B.
C-WADE7
Bronze Tier
Bronze Tier
Posts: 1869
Joined: Wed Sep 08, 2021 12:39 am

Re: RIP Weird Studio

Post by C-WADE7 »

That’s a real kick in the shorts! Good luck getting it all cleaned ,dried and oiled. You may want to invest in a dehumidifier to put down there to help out.
User avatar
glennbad
Gold Tier
Gold Tier
Posts: 8174
Joined: Mon May 15, 2006 11:13 am
Location: NH

Re: RIP Weird Studio

Post by glennbad »

Oh no, that's horrible! Are you able to dry those knives out good?
Froe
Posts: 637
Joined: Tue Feb 14, 2017 3:31 am
Location: Independence KY

Re: RIP Weird Studio

Post by Froe »

My sympathies.
Froe
Froe
XBMX
Bronze Tier
Bronze Tier
Posts: 106
Joined: Fri Jan 10, 2020 7:26 pm

Re: RIP Weird Studio

Post by XBMX »

Open them all up and place them on a window screen '"even if you have to take one out of one of you windows" put a fan under them a let it blow. The'll dry out pretty quickly. After 24hr lube and wax.
User avatar
Mumbleypeg
Gold Tier
Gold Tier
Posts: 15695
Joined: Fri Apr 18, 2014 1:28 am
Location: Republic of Texas

Re: RIP Weird Studio

Post by Mumbleypeg »

Sorry to learn about that - what a tragedy! ::teary_eyes::

You can likely salvage the knives if you get right on them, clean and dry them. WD-40 - just about the best (maybe only) thing it’s really really good for is water displacement. That’s what the WD stands for. Fate they’re good and dry, clean off any WD-40 residue and oil them. If they’ve been treated with Tuf-Glide or RenWax before they got wet, so much the better!

As for the rest (furniture, floors, ceiling and wall etc) there are some companies that specialize in water damage remediation. Your insurance company can likely recommend some in your area.

Ken
Member AKTI, TSRA, NRA.

If your religion requires that you hate someone, you need a new religion.

When the people fear their government, that is tyranny. When government fears the people, that is freedom.

https://www.akti.org/
RedRaiderRick
Bronze Tier
Bronze Tier
Posts: 699
Joined: Sat Jun 24, 2023 4:37 am

Re: RIP Weird Studio

Post by RedRaiderRick »

Oh man that blows! Hope the pump shotgun stayed dry!
To those who fought for it, freedom has a flavor the protected ones will never know.
LKSKNIVES
Gold Tier
Gold Tier
Posts: 897
Joined: Thu Feb 29, 2024 4:22 pm

Re: RIP Weird Studio

Post by LKSKNIVES »

TWKG
Sorry to hear this bad news. Hopefully the loss is minimal. The salvage work will be very much.
Steve
Reverand
Gold Tier
Gold Tier
Posts: 4467
Joined: Mon Oct 22, 2018 6:45 pm
Location: Pisgah, AL
Contact:

Re: RIP Weird Studio

Post by Reverand »

Additionally, spray down the knives with WD-40. It displaces the water and will help prevent rust.
Jesus is life.
Everything else is just a hobby.

~Reverand
Gtrclktr-351
Posts: 1371
Joined: Wed Mar 06, 2024 11:03 pm
Location: Danville, VA
Contact:

Re: RIP Weird Studio

Post by Gtrclktr-351 »

Sorry to hear of your bad luck. Hopefully with a little (lot?) of work you can salvage the knives. And as has been previously stated, a dehumidifier will aid in the general drying out process of the workshop.
"One man's trash is another man's treasure."
Bill
Modern Slip Joints
Posts: 1196
Joined: Sat Jul 14, 2018 4:15 am

Re: RIP Weird Studio

Post by Modern Slip Joints »

It's late August. We're having a week in the mid 90s. I'd open all the knives and get them and their empty storage containers out in the sunshine. With only a light wind they'd dry fast. While carbon knives wet a short time with water that is not salt water is nothing to panic over leaving them on that damp carpet is begging for trouble. After they're dry follow some of the suggestions above. I also like WD40 used sparingly. It can darken some handle materials.
User avatar
bestgear
Silver Tier
Silver Tier
Posts: 6258
Joined: Tue Apr 17, 2012 6:58 pm
Location: Oak Island NC
Contact:

Re: RIP Weird Studio

Post by bestgear »

Bummer for sure - amazing how the weak link in every system creates the most havoc when they fail - guaranteed this wasn’t on your weekend agenda - hoping there’s a silver lining somewhere - sending positive thoughts your way brother.
Tom
AAPK Administrator
https://www.tcjr-leatherworks.com
ThatWeirdKnifeGuy
Gold Tier
Gold Tier
Posts: 1666
Joined: Tue Jul 25, 2023 8:20 pm
Location: Wisconsin

Re: RIP Weird Studio

Post by ThatWeirdKnifeGuy »

Thank you all for the advice, condolences and well wishes. The pictures of the knives on the carpet and towels is where I spread them out to dry. That's in a finished area of the basement where I evacuated
my shops contents to. I've got 2 box fans and several smaller ones at full power and my high capacity dehumidifier chugging along. It drains right into the floor drain and its been going non stop. The knives have been about 75% gone through and dried blade by blade. The only casualty so far is the finish on my silverware chests. The piano I've decided to finally disassemble. For both ease and utilitarian purposes I've opted for a piece by piece methodical breakdown. Once the piano is gone I'll have more room for a real bench or more practical shelves.

Am pausing on the breakdown to research a bit. It seems there's a significant amount of tension on the piano wires, I don't want this to become a dangerous endeavor.

The silver lining here is that I've been wanting to disassemble and salvage this piano for a long time now, and maybe there will be money or good coins stashed inside ::tu::

Also everyone gets to see a majority of my non- user knife accumulation since it's all spread out. My wife included ::paranoid::

Oh and my 12 gauge pump got wet but is fine, same with the Ruger.
::nod:: https://newlifeknives.etsy.com ::nod::

That's my Etsy store where I sell old knives and sometimes handmade knife accessories to support my knife habbit. Thanks for looking my friend. ::tu::
User avatar
1967redrider
Gold Tier
Gold Tier
Posts: 21489
Joined: Wed Feb 02, 2011 4:23 pm
Location: Alexandria, VA
Contact:

Re: RIP Weird Studio

Post by 1967redrider »

Oh man, that's terrible. ::teary_eyes::
Pocket, fixed, machete, axe, it's all good!

You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter


CHRIST IS KING
cuttindux
Posts: 39
Joined: Fri Aug 23, 2024 3:32 am
Location: Oklahoma

Re: RIP Weird Studio

Post by cuttindux »

So sorry to hear of this misfortune. What a mess. Best of luck on all the restoration.
User avatar
SEArkHog
Bronze Tier
Bronze Tier
Posts: 60
Joined: Tue Nov 05, 2024 6:25 pm

Re: RIP Weird Studio

Post by SEArkHog »

Absolutely heartbreaking. Very sorry man and I hope you are able to salvage as much as possible.
tvic
Silver Tier
Silver Tier
Posts: 2881
Joined: Tue May 25, 2021 3:32 pm
Location: North Carolina

Re: RIP Weird Studio

Post by tvic »

Dang! Talk about bad luck! So very sorry about that! Thankfully the knives should be ok. Sounds like you're doing a good job of taking care of them. Sure hope insurance does what they're supposed to do, too!
Tim
“Live simply, love generously, care deeply, speak kindly, leave the rest to God.” - Ronald Reagan
ThatWeirdKnifeGuy
Gold Tier
Gold Tier
Posts: 1666
Joined: Tue Jul 25, 2023 8:20 pm
Location: Wisconsin

Re: RIP Weird Studio

Post by ThatWeirdKnifeGuy »

After a significant investment of time and energy, my work shop space has been restored. I would say to its former glory, but I feel the new iteration is superior to its antediluvian counterpart in many ways.
Attachments
20250903_220226.jpg
20250903_220237.jpg
20250903_220249.jpg
20250903_220428.jpg
20250903_220527.jpg
::nod:: https://newlifeknives.etsy.com ::nod::

That's my Etsy store where I sell old knives and sometimes handmade knife accessories to support my knife habbit. Thanks for looking my friend. ::tu::
doglegg
Gold Tier
Gold Tier
Posts: 23928
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: RIP Weird Studio

Post by doglegg »

ThatWeirdKnifeGuy wrote: Thu Sep 04, 2025 10:51 pm After a significant investment of time and energy, my work shop space has been restored. I would say to its former glory, but I feel the new iteration is superior to its antediluvian counterpart in many ways.
You did good.
User avatar
SwedgeHead
Posts: 602
Joined: Thu Jan 19, 2023 12:23 am

Re: RIP Weird Studio

Post by SwedgeHead »

Its BACK ! nice job recovering, that was quick.
stockman
Gold Tier
Gold Tier
Posts: 4119
Joined: Mon Jul 24, 2006 3:19 pm

Re: RIP Weird Studio

Post by stockman »

Really nice job. Happy it worked out so well. Harold
Gtrclktr-351
Posts: 1371
Joined: Wed Mar 06, 2024 11:03 pm
Location: Danville, VA
Contact:

Re: RIP Weird Studio

Post by Gtrclktr-351 »

Back in business, ::tu:: !
"One man's trash is another man's treasure."
Bill
woodwalker
Posts: 6112
Joined: Mon Jan 16, 2017 12:52 am

Re: RIP Weird Studio

Post by woodwalker »

Looks nice and cozy!! Great job!! :)
User avatar
glennbad
Gold Tier
Gold Tier
Posts: 8174
Joined: Mon May 15, 2006 11:13 am
Location: NH

Re: RIP Weird Studio

Post by glennbad »

Looking good, nice "reno"
Post Reply

Return to “General Knife Discussion”