Allen Cutlery Co. Newburgh, N.Y.

[New_Windsor_NY]

A few days ago, my visit to the post office produced this pocket knife. This pocket knife now becomes my most recent example to be posted under this topic or thread. This pocket knife also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. Overall, this is my thirty-third, EAGLE KNIFE COMPANY pocket knife. ALL thirty-two of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in GOOD condition. This pocket knife did need a VERY MINOR cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The EAGLE KNIFE COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... hp?t=62550

[New_Windsor_NY]

Recently, my trip to the post office produced this ALLEN CUTLERY COMPANY, NEWBURGH N.Y. (1917-1925), pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an ALLEN CUTLERY CO., one blade, one tang stamp, one handle stamp, 3 1/8" closed, all metal, pocket knife. The main blade front tang stamp says, "ALLEN (over) CUTLERY CO. (over) NEWBURGH NY" The patent date handle stamp says, "PAT. (over) JAN-23-17 (over) U.S.A." This pocket knife has handles with "designs" or "grips" carved into them. This is my fourth ALLEN CUTLERY COMPANY pocket knife with this particular style of handles. My other three ALLEN CUTLERY COMPANY pocket knives, with this particular style of handles, have ALL been previously posted under this topic or thread. The main blade (SUPER SHARP!!) does have a CRISP half stop. The main blade does have a VERY GOOD opening snap. The main blade does have a VERY GOOD closing snap. I would guesstimate that about 80% of the original, factory applied black oxidation, remains. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need cleaning.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[Miller Bro's]

I like that style handle design Skip

[New_Windsor_NY]

I.....

Thank you, Dimitri.
The Chinese evidently like that style of handle design also.
https://www.allaboutpocketknives.com/kn ... 73#p997573
The link is good as of this posting.
OR, see my post on Thursday, March 31, 2022.

[New_Windsor_NY]

Very recently, my visit to the post office produced this advertising pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" The main handle side says, "ROBINSON BOYS SHOES" The other handle side says nothing, it is blank. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. This is only my third EAGLE KNIFE Co pocket knife that has advertising on it. This is my thirty-fourth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-three of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The EAGLE KNIFE COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... hp?t=62550

[Miller Bro's]

[New_Windsor_NY]

.....

Thank you, Dimitri.

[New_Windsor_NY]

This morning, my trip to the post office produced this advertising, fob or key ring, pattern or style of pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my "slide lock" collection. It is a U.S.A., one blade, a cap lifter or bottle opener handle, 3" closed, all metal, fob or key ring, pattern or style of pocket knife. It does have a slide lock that unlocks the blade, open or closed, and it also locks the blade, open or closed. The slide lock works perfectly, with no problems. The main handle side says, "M & H OIL CO. - TIRES - BATT. & ACCES." It also says, "U.S.A.", just above the pivot pin. The other handle side says, "PH. GL. 4-3401 MADISON, NEBR. - PHILLIPS 66 PRODUCTS" This is my twenty-fifth pocket knife in this, fob or key ring, slide lock, pattern or style of pocket knife. My other twenty-four pocket knives in this, fob or key ring, slide lock, pattern or style, have ALL been previously posted, under and throughout, this topic or thread. While this pocket knife is NOT an ALLEN CUTLERY COMPANY pocket knife, it DOES fit into the "cousin" category. It is a "cousin" of the ALLEN CUTLERY COMPANY, the G. SCHRADE KNIFE COMPANY, the ETCHED P. COMPANY and some other cutlery companies that manufactured pocket knives of a similar, simple, pattern or style. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[Ripster]

Skip, that old M&H knife got me to thinking about the years long ago when we hung out at the station as kids . It was on main st. in our home town here and mom would send us to get cigarettes and stuff. The owners knew all of us in the neighborhood. Think they even sold us kids beer for the old man and we had a tab ( credit ) that Dad would pay at end of month . Times sure have changed. Somehow managed to save this matchbook.
Thank you for another interesting post .

[New_Windsor_NY]

Skip.....

Thank you, JP.

[New_Windsor_NY]

Back in November 2022, I purchased the pocket knife that is in pictures #1-4, posted below (MY item, NOT my pictures). I originally posted this pocket knife, under this topic or thread, back on Thursday, September 21, 2023. I temporarily "repaired" the broken blade with a magnet (for the pictures). I know that broken blades should not be welded. But, since I have NO intention of ever using this pocket knife, only displaying it, I went ahead and had the broken blade tip welded back on the blade. Also, if I ever do decide to part with this pocket knife, it WILL BE DISCLOSED that the blade tip was previously broken AND it was repaired by welding. I showed the broken pocket knife to a high school kid I know. He was learning how to weld and he said he might be able to repair it. I just got home from picking up the pocket knife from him. I knew there would be some blade loss, I just didn't know how much. As it turns out, for a first effort, I think he did a VERY GOOD job. He did NOT charge me, but I gave him a few bucks anyway. The broken, now repaired pocket knife, is in pictures #5-8, posted below. Picture #9 posted below, is of my other five pocket knives, of the same pattern or style, for comparison. These five, same pattern or style of pocket knives, have been previously posted under this topic or thread. The VERY LAST picture is of The ALLEN CUTLERY COMPANY pattern ad.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[Miller Bro's]

The kid did a pretty good job

Nice to see a kid that even has an interest in welding

[New_Windsor_NY]

The.....

The kid thanks you, Dimitri.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), two blades, two tang stamps, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. PEND (over) MADE IN USA" The secondary blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. PEND (over) MADE IN USA" In total, this is my thirty-fifth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-four of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted. This is my sixth, EAGLE KNIFE COMPANY pocket knife, that has two blades. The main blade appears to have been reshaped. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a GOOD half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The EAGLE KNIFE COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... hp?t=62550

[New_Windsor_NY]

Very recently, my trip to the post office produced this advertising pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is a G. SCHRADE, one blade, a cap lifter or bottle opener handle, 3" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "G. SCHRADE (over) KNIFE CO. INC. (over) B'PORT. CT. (over) U.S.A." The main handle side says, "Drink Nugrape" (written). The other handle side says, "Drink Nugrape" (written). This is my seventh pocket knife, in this particular pattern or style, that advertises this specific product, company, business, event, etc. Overall, this is pocket knife number thirty-six, in this particular pattern or style. My other thirty-five pocket knives, in this distinct pattern or style, have ALL been previously posted, under and throughout, this topic or thread. While this pocket knife is most definitely NOT an ALLEN CUTLERY COMPANY pocket knife, it definitely DOES fit into the "cousin" category. It is a "cousin" of the ALLEN CUTLERY COMPANY, the EAGLE KNIFE COMPANY, the ETCHED P. COMPANY and some other knife or cutlery companies that manufactured pocket knives of a similar, simple, pattern or style. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a VERY GOOD closing snap. This pocket knife is in GOOD condition. There wasn't much enamel left on either side of this pocket knife. I did remove what was left.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

I accidentally stumbled upon this while searching for something else.....

I'm actually embarrassed to post this THING, here, under the Allen Cutlery Company (1917-1925), topic or thread. There is so much that is WRONG with this THING, it would make me sick to list the faults.
The ONLY feature that "looks" correct, is the tang stamp. JUST the tang stamp.
NOT My Item(s). NOT My Picture(s). The pictures have NOT been altered or edited, by me, in any manner.
The four pictures were upside down to begin with.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

This Is The Seller's Description, NOT Mine.
"Up for auction a ANTIQUE ALLEN CUTLERY FOLDING POCKET KNIFE NEWBURGH, N.Y. 1917-1925. Good snap on both blades. Jacket in great condition. Used, sharpened and carried. See photos for details and condition."

[New_Windsor_NY]

A few days ago, my visit to the post office produced these three advertising, slide lock, fob or key ring, pattern or style of pocket knives. They now become my most recent examples to be posted under this topic or thread. They also became the most recent examples to be added to my "slide lock", pocket knife collection. ALL three pocket knives are U.S.A., one blade, a cap lifter or bottle opener handle, 3" closed, all metal, fob or key ring, slide lock, pattern or style of pocket knives. ALL three pocket knives have a slide lock that unlocks the blade, open or closed, and it also locks the blade, open or closed. ALL three slide locks work perfectly, with no problems. ALL three main handle sides say, "AUTO ELECTRIC - HAGERSTOWN, MD." ALL three main handle sides also say, "U.S.A.", just above the pivot pin. ALL three of the other handle sides say nothing, they are blank. These three pocket knives are numbers, twenty-six, twenty-seven, and twenty-eight in this, fob or key ring, slide lock, pattern or style. My other twenty-five pocket knives in this, slide lock, fob or key ring, pattern or style, have ALL been previously posted, under and throughout, this topic or thread. While these three pocket knives are NOT ALLEN CUTLERY COMPANY pocket knives, they DO fit into the "cousin" category. They are "cousins" of the ALLEN CUTLERY COMPANY, the G. SCHRADE KNIFE COMPANY, the ETCHED P. COMPANY and other cutlery companies that manufactured pocket knives of a similar, simple, pattern or style. These three pocket knives are in VERY GOOD condition. These three pocket knives did NOT need any cleaning. I just wiped them off. I took some pictures and here they are.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

A few days ago, my trip to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 3 3/8" closed, one spring, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO. (over) PAT. PEND (over) MADE IN USA." This is my thirty-sixth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-five of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted. Although this pocket knife is NOT AN ALLEN CUTLERY COMPANY pocket knife, it DOES fit into the "cousin" category. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a VERY GOOD closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The EAGLE KNIFE COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... hp?t=62550

[New_Windsor_NY]

Very recently, my visit to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), two blades, one tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. OCT. 1.18 (over) MADE IN USA" This is my seventh, EAGLE KNIFE COMPANY pocket knife, that has two blades. This is my thirty-seventh, EAGLE KNIFE COMPANY pocket knife. ALL thirty-six of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted. And although this pocket knife is NOT AN ALLEN CUTLERY COMPANY pocket knife, it DOES fit into the "cousin" category. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade appears to have been reshaped. The main blade does have a GOOD half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a GOOD half stop. The secondary blade does NOT have an opening snap. The secondary blade does NOT have a closing snap. This pocket knife is in GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The EAGLE KNIFE COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... hp?t=62550

[New_Windsor_NY]

In a way, this pocket knife represents a milestone in New York cutlery history.
As of 12:00:01 A.M.(E.S.T), Thursday, January 1, 2026, this ALLEN CUTLERY COMPANY (1917-1925) pocket knife,
AND ALL OTHER complete or "parts of" ALLEN CUTLERY COMPANY pocket knives, became 100 to 108 years old.

A couple of days ago, my trip to the post office produced this ALLEN CUTLERY COMPANY, NEWBURGH N.Y., pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an ALLEN CUTLERY CO., one blade, one tang stamp, one handle stamp, 3 1/8" closed, all metal, pocket knife. The main blade front tang stamp says, "ALLEN (over) CUTLERY CO (over) NEWBURGH NY" The patent date handle stamp says, "PATENTED (over) JAN-23-17" This is only my second, ALLEN CUTLERY COMPANY pocket knife, that has THIS particular, two line handle stamp. My other one was posted, under this topic or thread, back on Friday, February 16, 2024. The main blade (SCARY SHARP!!) does have a CRISP half stop. The main blade does have a VERY GOOD opening snap. The main blade does have a NASTY closing snap. Even with some blade loss, overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[Miller Bro's]

Several nice ones since I last looked in on this thread Skip

[New_Windsor_NY]

Several.....

Thank you, Dimitri.

[New_Windsor_NY]

This morning, my visit to the post office produced this advertising pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is a G. SCHRADE, one blade, a cap lifter or bottle opener handle, 3" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "G. SCHRADE (over) KNIFE CO. INC. (over) B'PORT. CT. (over) U.S.A." The main handle side says, "MORE FLAVOR FOR YOUR MONEY SunCrest" The other handle side says, "SunCrest MORE FLAVOR FOR YOUR MONEY" This is my sixth pocket knife, in this particular pattern or style, that advertises this specific product, company, business, event, etc. Overall, this is pocket knife number thirty-seven, in this particular pattern or style. My other thirty-six pocket knives, in this distinct pattern or style, have ALL been previously posted, under and throughout, this topic or thread. While this pocket knife is most definitely NOT an ALLEN CUTLERY COMPANY pocket knife, it definitely DOES fit into the "cousin" category. It is a "cousin" of the ALLEN CUTLERY COMPANY, the EAGLE KNIFE COMPANY, the ETCHED P. COMPANY and some other knife or cutlery companies that manufactured pocket knives of a similar, simple, pattern or style. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a VERY GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT need cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Yesterday afternoon, my trip to the post office produced this advertising, slide lock, fob or key ring, pattern or style of pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my "slide lock", pocket knife collection. It is a U.S.A., one blade, a cap lifter or bottle opener handle, 3" closed, all metal, advertising, slide lock, fob or key ring, pattern or style of pocket knife. This pocket knife has a slide lock that unlocks the blade, open or closed. It also locks the blade, open or closed. The slide lock work perfectly, with no issues. The main handle side says, "RISSEL ATLANTIC SERVICE - PH 35756 HONEY BROOK, PA." The main handle side also says "U.S.A.", just above the pivot pin. The other handle side says nothing, it is blank. This is my twenty-ninth pocket knife that is in this, slide lock, fob or key ring, pattern or style. My other twenty-eight pocket knives in this, slide lock, fob or key ring, pattern or style, have ALL been previously posted, under and throughout, this topic or thread. While this pocket knife is definitely NOT an ALLEN CUTLERY COMPANY pocket knife, it DOES fit into the "cousin" category. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the G. SCHRADE KNIFE COMPANY, the ETCHED P. COMPANY and other cutlery companies that manufactured pocket knives of a similar, simple, pattern or style. This pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Recently, my trip to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to join my collection. It is an ALLEN CUTLERY CO. (1917-1925), one blade, two handle stamps, 4 1/8" closed, all metal, No. 30 pattern, hawkbill, pocket knife. The manufacturer handle stamp says, "ALLEN (over) CUTLERY CO. (over) NEWBURGH, N.Y." The patent date handle stamp says, "PAT. (over) JAN-23-17 (over) U.S.A." There is NO tang stamp. This is my tenth, ALLEN CUTLERY CO., No. 30, hawkbill pocket knife. My other nine, ALLEN CUTLERY CO., No. 30, hawkbill pocket knives, have ALL been previously posted, under and throughout, this topic or thread. I now actually have a total of twelve of these hawkbill pocket knives. ALL twelve hawkbill pocket knives have an ALLEN CUTLERY CO. handle. However, two of the twelve hawkbill pocket knives have Ulery blades. The two, previously posted, Ulery hawkbill pocket knives are legitimate. I would guesstimate that there is 99% of the original, factory applied oxidation, remaining on the handle(s). The main blade has a CRISP half stop. The main blade has a VERY GOOD opening snap. The main blade has a NASTY closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.