Knife Display Ideas
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
Knife Display Ideas
Hey guys I wanna display some of my newer nicer knives, with thier boxes. I'd like to see some pics of how you display yours for some ideas. I would also like to find a place to purchase some acrylic knife stands. any ideas, tips, links will be appreciated greatly.
Anthony
Anthony
- CarlM
- Posts: 194
- Joined: Sun Mar 05, 2006 10:36 pm
- Location: Western KY
- 4ever3
- Posts: 582
- Joined: Sun Jan 08, 2006 10:31 pm
- Location: Ok
I havent bought any of these yet, but the guys I know that have say they are top quality, not only can the price not be beat but you get to pic the wood and felt color!
http://www.customdisplays.com/index.html
http://www.customdisplays.com/index.html
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
Here are a couple examples.
One in wood. Then a multiple display stand in plastic.
Bill
One in wood. Then a multiple display stand in plastic.
Bill
- Attachments
-
- Slipjoint Display.jpg (33.13 KiB) Viewed 8340 times
-
- 6 on the rack.jpg (28.28 KiB) Viewed 8341 times
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
-
jabberwocky
- Posts: 116
- Joined: Tue Mar 28, 2006 4:47 pm
Anthony;
What I use to display my knives is somewhat unusual, but it really works
well, and gives you the ability to display a LOT of knives...even if you want to keep some in the boxes, collector tins, etc.
It's actually called either a "sofa table" or "library table". It looks like an
elongated end table, but it's 29 inches tall; 50 inches wide; and 18 inches
deep. The top is made of a very large sheet of glass...(removable...it
sits within an inset in the table top). The inside of the table is recessed so
that, in effect, it looks like a large glass covered display case...but it's a
nice piece of furniture. I have mine in my office/library. It holds over 50
knives right now, and I could probably squeeze a few more in there. The
knives lay nicely right inside, and the glass cover keeps out dust, dirt,
etc. If you want to take a knife out...you just lift the glass...I put a small
knob on mine for that purpose. I'll try and get out a photo for you.
Just an idea, but you may want to look into something like that?
What I use to display my knives is somewhat unusual, but it really works
well, and gives you the ability to display a LOT of knives...even if you want to keep some in the boxes, collector tins, etc.
It's actually called either a "sofa table" or "library table". It looks like an
elongated end table, but it's 29 inches tall; 50 inches wide; and 18 inches
deep. The top is made of a very large sheet of glass...(removable...it
sits within an inset in the table top). The inside of the table is recessed so
that, in effect, it looks like a large glass covered display case...but it's a
nice piece of furniture. I have mine in my office/library. It holds over 50
knives right now, and I could probably squeeze a few more in there. The
knives lay nicely right inside, and the glass cover keeps out dust, dirt,
etc. If you want to take a knife out...you just lift the glass...I put a small
knob on mine for that purpose. I'll try and get out a photo for you.
Just an idea, but you may want to look into something like that?
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
Great ideas everyone! Keep them coming, Thanks!
I have a few wood display cases for the ones without boxes.
Jabberwocky that sounds terrific, I'd love to see a photo if you get time.
Great looking stag El Lobo
Carl, TY...I bought the 30 medium styles. They look like they will hold the box wih the knife resting on top.
I have a few wood display cases for the ones without boxes.
Jabberwocky that sounds terrific, I'd love to see a photo if you get time.
Great looking stag El Lobo
Carl, TY...I bought the 30 medium styles. They look like they will hold the box wih the knife resting on top.
- longbeachbum
- Posts: 381
- Joined: Fri Mar 11, 2005 8:44 pm
- Location: Long Beach, CA
This was my FIRST attempt at making a display case, completed about a month ago. As you cas see it was done on a small scale, and has some problems, but it was mainly a practice run. My next one will probably be an upright version, and larger.
- Attachments
-
- Displayresized1.jpg (142.77 KiB) Viewed 8311 times
-
- Displayresized2.jpg (157.05 KiB) Viewed 8311 times
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
- jonet143
- Gold Tier

- Posts: 6922
- Joined: Fri Jun 23, 2006 3:33 am
- Location: w'ford-tejas
i prefer enclosed displays. here is one of mine. protection, safe from handling, etc. the stands do make a knife stand out though. i like the wood ones.
- Attachments
-
- 2 for $25 on ebay
- box2.JPG (369.18 KiB) Viewed 8278 times
johnnie f 1949
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
- longbeachbum
- Posts: 381
- Joined: Fri Mar 11, 2005 8:44 pm
- Location: Long Beach, CA
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
-
Gr8Scout
Nice job each and every one of you. This is a great idea for a thread. I like the clear stands El Lobo shows us, and I use many of them. Here is some Bucks. Also, I like the hang on the wall types where the glass holds the knives against the foam back. But I don't think anything works better than original factory display cases. As the original poster desired somewhere to also keep the boxes safe, well, there is usually box storage and extra stock space built into these. Here is a Schrade insert, taken out of the glass case for ease of photoing.
Please, more!
Phil
ps... I think a CD or DVD tower filled with the clear plastic display stands would work great!
Please, more!
Phil
ps... I think a CD or DVD tower filled with the clear plastic display stands would work great!
- Attachments
-
- schrade.jpg (64.01 KiB) Viewed 8205 times
-
- cases.jpg (50.9 KiB) Viewed 8205 times
-
- buck stand three 110s.jpg (18.69 KiB) Viewed 8205 times
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
Well Phil,
Finally, we get a little additional taste of your knife displays...
Looks like the Schrade board is almost filled up. I couldn't quite tell which ones you still need?
Anyway, some nice displays here, great to see, and discuss.
Bill
Finally, we get a little additional taste of your knife displays...
Looks like the Schrade board is almost filled up. I couldn't quite tell which ones you still need?
Anyway, some nice displays here, great to see, and discuss.
Bill
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
-
Gr8Scout
I still need an 885UH..... But! Although you cannot see them, each of these knives has a blade etch; Many of them are the annual 'Compliments of' knives given away by Schrade. Just making it a bit harder to collect what is still common place knifes. I bought the display, one of several, from area hardware stores when Schrade went out of business.
Here is a nice Camillus case. The first post war counter display.
Phil
ps... I really wanna see the sofa table, jaborwockie.
Here is a nice Camillus case. The first post war counter display.
Phil
ps... I really wanna see the sofa table, jaborwockie.
- Attachments
-
- Imperial Hammers with the hammered look blades
- imperial hammer.jpg (40.45 KiB) Viewed 7032 times
-
- imperial frontiers
- frontiers.jpg (41.05 KiB) Viewed 7032 times
-
- Camillus case
- first postwar Camillus counter display.jpg (38.39 KiB) Viewed 7032 times
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
- justold52
- Posts: 4459
- Joined: Tue Aug 01, 2006 2:47 am
- Location: Bloomington, ILL the sick state
- sunburst
- Posts: 2921
- Joined: Wed Nov 23, 2005 10:07 pm
- Location: The Scrublands of Central Florida
- owc
- Posts: 5
- Joined: Wed Sep 27, 2006 3:01 am
- Location: U.S.A.
- Contact:
-
jabberwocky
- Posts: 116
- Joined: Tue Mar 28, 2006 4:47 pm
- jonet143
- Gold Tier

- Posts: 6922
- Joined: Fri Jun 23, 2006 3:33 am
- Location: w'ford-tejas
hey ken, nice display and cabinet. did you modify the case? it's hard to get all the things lit up, you might want to try some additional lighting indoors. very good, keep it up.
johnnie f 1949
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
- tank
- Posts: 1316
- Joined: Thu Aug 24, 2006 4:35 am
- Location: Shiloh, Tn
- Contact:
