Help identify this maker 🙏🏽
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Help identify this maker 🙏🏽
Hi everyone, the pictures posted are from the seller of a doctor’s knife I am interested in purchasing, but do not know the maker. The tangs seem to only have “America”, stamped on them. The seller suspects either American Shear and Knife Co of Woodbury Ct or American Knife Company of Thomaston,CT. Appreciate if anyone knows.
Best,
Fred
Best,
Fred
- New_Windsor_NY
- Gold Tier

- Posts: 14045
- Joined: Thu Nov 08, 2018 4:50 pm
- Location: I'm On The Far Right On The Left Coast In Commiefornia
Re: Help identify this maker 🙏🏽
Even though your tang stamp is different from my
tang stamp pictured below, I believe the pocket knife
in question is from Japan. But.....
GOINS (1998 edition) has, besides Japan, quite
a few, different, AMERICAN KNIFE CO's listed.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
Thanks for the reply, Skip. I also came across lots of “American” named knife companies (per Levine’s book) and can’t quite pin it down. How’s the quality of your Japanese made traditional slipjoints?
- New_Windsor_NY
- Gold Tier

- Posts: 14045
- Joined: Thu Nov 08, 2018 4:50 pm
- Location: I'm On The Far Right On The Left Coast In Commiefornia
Re: Help identify this maker 🙏🏽
You're welcome, BrainDocB.
I actually have NO complaints about ANY
of my Made In Japan pocket knives.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
Re: Help identify this maker 🙏🏽
I believe your knife is a vintage American made knife not a Japanese made one. Just my opinion
- peanut740
- Gold Tier

- Posts: 8124
- Joined: Fri Jan 23, 2009 2:32 pm
- Location: Ohio, along the river
- Contact:
Re: Help identify this maker 🙏🏽
Agreed.galvanic1882 wrote: ↑Sun Nov 24, 2024 12:35 pm I believe your knife is a vintage American made knife not a Japanese made one. Just my opinion
Roger
- Mumbleypeg
- Gold Tier

- Posts: 15705
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: Help identify this maker 🙏🏽
Most made-in-Japan pocket knives are post WWII. I believe the OP knife is much older. It has features not found on Japanese made pocket knives I have seen.
Nice knife, whoever made it.
Ken
Nice knife, whoever made it.
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
Thanks everyone. I decided to purchase and plan to post more pics and do some more research once I get it in hand. Couldn’t resist, as I have a big doctors knife collection and a few MOPs from the 80s/90s (Schatt and Morgan and Fightn Roosters). Will be nice to have a real vintage one!
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
Re: Help identify this maker 🙏🏽
It would be great to see you post those doctors knives

- Miller Bro's
- Gold Tier

- Posts: 13631
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
The 3 MOP doctor knives from top to bottom:
Schatt and Morgan (my favorite of the handles)
Bulldog brand (1987)
Fightn Rooster (1999, one of the rare 3 bladed versions)
Schatt and Morgan (my favorite of the handles)
Bulldog brand (1987)
Fightn Rooster (1999, one of the rare 3 bladed versions)
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
And here’s the collection (most of them).
All US or Germany made.
All US or Germany made.
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
-
Thomasg
- Posts: 744
- Joined: Sat Jul 23, 2022 8:12 pm
- Location: Batesville Arkansas
Re: Help identify this maker 🙏🏽
Not an expert by any means , but your knife Looks like it may have a similar build to this Robeson .Robeson produced some knifes on contract . Whether or not any of the contract knifes may have been stamped America might be worth looking into .Great looking knife . Thank you for sharing .BrainDocB wrote: ↑Sun Nov 24, 2024 12:48 am Hi everyone, the pictures posted are from the seller of a doctor’s knife I am interested in purchasing, but do not know the maker. The tangs seem to only have “America”, stamped on them. The seller suspects either American Shear and Knife Co of Woodbury Ct or American Knife Company of Thomaston,CT. Appreciate if anyone knows.
Best,
Fred
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
Thanks for passing this along. I certainly see a lot of similarities, outside of the pen blade replacing the spatula of course. That Robeson look flawless. What year is it?
I have a few Robeson branded doctor’s knives that were made by Queen in the early 2000s.
I have a few Robeson branded doctor’s knives that were made by Queen in the early 2000s.
-
doglegg
- Gold Tier

- Posts: 23947
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
- peanut740
- Gold Tier

- Posts: 8124
- Joined: Fri Jan 23, 2009 2:32 pm
- Location: Ohio, along the river
- Contact:
Re: Help identify this maker 🙏🏽
Similar build,but definitely different. Handle pins for sure.That Robeson dates from the late 1890's to very early 1900's.I'd have to dig out my Robeson reference to give exact dates.BrainDocB wrote: ↑Thu Nov 28, 2024 4:05 am Thanks for passing this along. I certainly see a lot of similarities, outside of the pen blade replacing the spatula of course. That Robeson look flawless. What year is it?
I have a few Robeson branded doctor’s knives that were made by Queen in the early 2000s.
I've owned that Robeson drs knife twice or it's twin.
Roger
-
Thomasg
- Posts: 744
- Joined: Sat Jul 23, 2022 8:12 pm
- Location: Batesville Arkansas
Re: Help identify this maker 🙏🏽
Picture shared was borrowed from your 2017 post .peanut740 wrote: ↑Thu Nov 28, 2024 2:16 pmSimilar build,but definitely different. Handle pins for sure.That Robeson dates from the late 1890's to very early 1900's.I'd have to dig out my Robeson reference to give exact dates.BrainDocB wrote: ↑Thu Nov 28, 2024 4:05 am Thanks for passing this along. I certainly see a lot of similarities, outside of the pen blade replacing the spatula of course. That Robeson look flawless. What year is it?
I have a few Robeson branded doctor’s knives that were made by Queen in the early 2000s.
I've owned that Robeson drs knife twice or it's twin.
-
BrainDocB
- Posts: 12
- Joined: Fri Aug 28, 2020 4:28 am
Re: Help identify this maker 🙏🏽
Got the knife in hand! Zero regrets.
Has an interesting marking on the pile side tang.
Any ideas?
Has an interesting marking on the pile side tang.
-
doglegg
- Gold Tier

- Posts: 23947
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
- Mumbleypeg
- Gold Tier

- Posts: 15705
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: Help identify this maker 🙏🏽
Your picture of the reverse side tang stamp is out of focus so can’t tell, but it reminds me of the stamp of Hermann Konejung. viewtopic.php?p=1107952&hilit=Eyeglasses#p1107952
Probably a long shot.
Ken
Probably a long shot.
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/