Trying to identify maker
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Trying to identify maker
Bought this at a flea market for a couple of bucks as a cleaning project. Although it's a beater, I thought I should at least make an attempt to identify the maker. The only imprint is "MADE IN U.S.A." on the tang of the main blade. Not much, if anything, to go on. The closed knife is 3.25 inches. Any suggestions are much appreciated. Thanks for looking.
- Attachments
-
-
-
-
-
-
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
woodwalker
- Posts: 6125
- Joined: Mon Jan 16, 2017 12:52 am
Re: Trying to identify maker
I have one that says Made in USA that looks like it and was told it was a UTICA. There are many more knowledgeable than me though. I'd wait for one to chime in.PringleTree wrote: ↑Wed Nov 06, 2024 6:42 am Bought this at a flea market for a couple of bucks as a cleaning project. Although it's a beater, I thought I should at least make an attempt to identify the maker. The only imprint is "MADE IN U.S.A." on the tang of the main blade. Not much, if anything, to go on. The closed knife is 3.25 inches. Any suggestions are much appreciated. Thanks for looking.
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
Thanks, WW, that (Utica) gives me a possibility to explore. Much appreciated.
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
New_Windsor_NY
- Gold Tier
- Posts: 14045
- Joined: Thu Nov 08, 2018 4:50 pm
- Location: I'm On The Far Right On The Left Coast In Commiefornia
Re: Trying to identify maker
There may be one like yours here:
https://www.allaboutpocketknives.com/kn ... hp?t=59813
Or here:
https://www.allaboutpocketknives.com/kn ... php?t=2822
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
Skip, thanks for the thread links--much appreciated!
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
New_Windsor_NY
- Gold Tier
- Posts: 14045
- Joined: Thu Nov 08, 2018 4:50 pm
- Location: I'm On The Far Right On The Left Coast In Commiefornia
Re: Trying to identify maker
You're welcome.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
-
1967redrider
- Gold Tier
- Posts: 21505
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Trying to identify maker
I seem to recall Wards "Made In USA" pocket knives were made by Camillus. 
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
Thanks, John. Another avenue to explore.1967redrider wrote: ↑Thu Nov 07, 2024 1:22 am I seem to recall Wards "Made In USA" pocket knives were made by Camillus.
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
The above knife after cleaning--penetrating oil, Scotch Brite non-scratch pads, bamboo skewers, soft pipe cleaners, 0000 steel wool, and lots of elbow grease.
Chris
Chris
- Attachments
-
-
-
-
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
woodwalker
- Posts: 6125
- Joined: Mon Jan 16, 2017 12:52 am
Re: Trying to identify maker
Good job!! That old gals got some stories to tell!!PringleTree wrote: ↑Mon Nov 11, 2024 8:00 am The above knife after cleaning--penetrating oil, Scotch Brite non-scratch pads, bamboo skewers, soft pipe cleaners, 0000 steel wool, and lots of elbow grease.
Chris
Enjoy your knife! 
-
doglegg
- Gold Tier
- Posts: 23947
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Trying to identify maker
Elbow grease sure works wonders.
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
Thanks, ww!woodwalker wrote: ↑Mon Nov 11, 2024 12:20 pmGood job!! That old gals got some stories to tell!!PringleTree wrote: ↑Mon Nov 11, 2024 8:00 am The above knife after cleaning--penetrating oil, Scotch Brite non-scratch pads, bamboo skewers, soft pipe cleaners, 0000 steel wool, and lots of elbow grease.
Chris
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
-
PringleTree
- Silver Tier
- Posts: 413
- Joined: Tue Oct 22, 2024 5:37 am
- Location: lower Shenandoah Valley (Eastern Panhandle of West Virginia)
Re: Trying to identify maker
Yep! Amazing how much satisfaction a person can get doing something simple with their hands.
"...Oh, little darling of mine
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)
I just can't believe it's so
Though it seems strange to say
I never been laid so low..." (Paul Simon, Mother & Child Reunion, 1972, grieving the death of his beloved dog)