Schrade Contract Knives

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19899
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Contract Knives

Post by orvet »

Eric,
I agree with your hypotheses. I don't think there was much cooperation between Ulster (or ISC), under Albert Baer and Camillus until after Adolph Castor's death in 1947. Indeed, it may have been well after that when the cooperation began.

This is an excellent point of research. I'm going just Tom Williams about it.
I know Albert Baer left Camillus with a pretty good chunk of Camillus stock, but as I recall there was a bit of resentment at his leaving. This was probably due in large part to the fact that he took the Sears account with him. He had developed the Sears account, and the Sears people were very loyal to him personally, but it has to hurt when your top salesman leaves and takes your biggest account with him.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
ea42
Posts: 3194
Joined: Tue Oct 17, 2006 8:23 pm
Location: Wallkill, NY

Re: Schrade Contract Knives

Post by ea42 »

That resentment is just what I was referring to, especially the little historical pieces that Michael posted a while back on BFC. I believe Once Mr Kastor passed away, Albert Baer retained control of the company, and passed control to his two daughters. This I believe is when the "sharing" of parts came about. It would definitely be interesting to hear Tom Williams' take on this as i'm only going by bits and pieces that I recall reading in the past.

Eric
User avatar
Paul M
Posts: 172
Joined: Mon Mar 05, 2007 8:37 pm

Re: Schrade Contract Knives

Post by Paul M »

Here is tmwsiy's 272 added to the mix. The nail nick on the Ulster is a bit longer than the Schrade and Keen Kutters which are the same length. I made all the frames the same size.
Attachments
4examples.jpg
Paul M
User avatar
upnorth
Posts: 2959
Joined: Sun Oct 15, 2006 8:43 pm
Location: Vancouver, Canada

Re: Schrade Contract Knives

Post by upnorth »

Magic to my brontosaurus eyes! I wish I could do that!!
Attachments
brontotoy.jpg
brontotoy.jpg (13.74 KiB) Viewed 3709 times
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!


Johnnie Fain would have approved!
1949 - 2009
User avatar
upnorth
Posts: 2959
Joined: Sun Oct 15, 2006 8:43 pm
Location: Vancouver, Canada

Re: Schrade Contract Knives

Post by upnorth »

Paul does your 272 have a saber-ground blade?
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!


Johnnie Fain would have approved!
1949 - 2009
User avatar
Paul M
Posts: 172
Joined: Mon Mar 05, 2007 8:37 pm

Re: Schrade Contract Knives

Post by Paul M »

Charlie,
My 272 is a later vintage (plastic Tube era) which does not have a Saber ground master. The frame is the same- no cut out for the Pen blade nick. Won't have access to it until monday when I'm back at my studio. Busy this weekend being the carpenter's helper etc....
Paul M
User avatar
ratlesnake75
Posts: 978
Joined: Mon Sep 01, 2008 7:22 am
Location: ULM, AR
Contact:

Re: Schrade Contract Knives

Post by ratlesnake75 »

Here is 2 knives to compare--E. WECK & SON----one with early style peach seed, and 2nd is the normal later style slanted peach seed-------------THE MINT KNIFE IS FOR SALE RIGHT NOW ON EBAY MY FRIENDS WITHOUT A RESERVE--THX MARK
Attachments
DSCN7160.JPG
DSCN7160.JPG (83.61 KiB) Viewed 3482 times
DSCN7161.JPG
DSCN7161.JPG (82.87 KiB) Viewed 3480 times
DSCN7163.JPG
DSCN7163.JPG (77.6 KiB) Viewed 3478 times
c1.jpg
c1.jpg (32.88 KiB) Viewed 3481 times
c2.jpg
c2.jpg (34.76 KiB) Viewed 3481 times
c3.jpg
c3.jpg (29.22 KiB) Viewed 3478 times
c4.jpg
c4.jpg (25.5 KiB) Viewed 3478 times
I Buy/Sell/Trade All Vintage Antique Pocket knives from Junkers to Mint. I am Easy going, so Please shoot me a message ANYTIME!!! l Live & Breath KNIVES Everyday.
User avatar
MrBlister
Posts: 3298
Joined: Fri Apr 24, 2009 10:26 pm

Re: Schrade Contract Knives

Post by MrBlister »

Im in hopes they also made knives for Maher & Grosh..... or I got *(&^(#@ on this one...
Heres a sample from my pitiful lil Schrade collection.. A 293 NOT nearly as impressive as the knives above..

regards... Blister
Attachments
sch293.jpg
sch293.jpg (14.58 KiB) Viewed 3464 times
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19899
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Contract Knives

Post by orvet »

Here is a Maher & Grosh that I think was made by Schrade Cut Co,
sure looks like it in spite of the worn clip blade!
Dale
Attachments
Maher & Grosh 2.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
upnorth
Posts: 2959
Joined: Sun Oct 15, 2006 8:43 pm
Location: Vancouver, Canada

Re: Schrade Contract Knives

Post by upnorth »

Nice to see this old thread pop up!
This Hoffritz looks mighty Schradey! I've posted it elsewhere, but maybe you missed it?
Attachments
Hoffritz Jack.jpg
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!


Johnnie Fain would have approved!
1949 - 2009
User avatar
ratlesnake75
Posts: 978
Joined: Mon Sep 01, 2008 7:22 am
Location: ULM, AR
Contact:

Re: Schrade Contract Knives

Post by ratlesnake75 »

Very nice Hoffritz New York knife there Charlie--Please check out the E. Weck & Son half-congress--There has been some information written on E.Weck & Son knives because they made switchblades(yep), Book called Antique American Switchblades by Mark Erickson has a section under E. Weck & Son with information regarding some patent's for which Scrade Made knives for them--Interesting though we all can see that famous peach seed that schrade loved to use--Thx Mark
I Buy/Sell/Trade All Vintage Antique Pocket knives from Junkers to Mint. I am Easy going, so Please shoot me a message ANYTIME!!! l Live & Breath KNIVES Everyday.
User avatar
RobesonsRme.com
Posts: 10129
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Schrade Contract Knives

Post by RobesonsRme.com »

Now, you all know that Schrade is not my baliwick. I still have my Old Timer large stockman from when I was a boy, but that's it.
I have, however, been reading these Schrade threads with interest and admiration of the fantastic knives you guys post.
I came across this Weck on Ebay today. Anybody ever see a big folding hunter like this one.
I suspect that bone says, "Schrade" to somebody here.
Charlie Noyes

http://cgi.ebay.com/oLD-E-Weck-Co-NY-Kn ... 7C294%3A50
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19899
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Contract Knives

Post by orvet »

It looks Schrade to me!

It looks like a Schrade Cut Co I picked up at the Oregon show in '08.


Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”