WHAT ARE YOU CARRYIN RIGHT NOW? WHAT IS YOUR FAV EDC?

[1967redrider]

Tops Mini Scandi Folder in Bohler N690. Not so mini at 4 1/4" closed. Very sharp, detented flipper and I even like the pocket clip design on it. They call it tan Micarta but it looks brown to me.

[bighomer]

One for the right, one for the left and a finger nail cleaner for the watch pocket.

[woodwalker]

Carrying this Antique Tarry Levigne French Palm knife today.

[Ivoryman]

Voos/Kutmaster

[Dan In MI]

I have to admit, the Esee Izula without its belt clip is a much different knife, and very comfortable to carry even in sweats. It is MUCH thinner, and the screws and clip seemed to double the weight.

I briefly tried the belt clip on my Izula II, and settled on neck carry. Better that way, as there's no ambiguity about it being concealed.

Dan, maybe a holding the dark areas of the blade (or all of it) to a wire wheel on a grinder, that should clean up the blade a lot and not scratch it. The wire should polish and remove that dark oxidation.

I'll give that a go. Thanks for the tip, and a GSPTOPDOG-inspired carry is coming soon!

Great carries from everyone, as usual! Mine for today are a newly acquired Marble's GI Jack, a modified Camillus 27, the Izula II, and a Leatherman Rebar.

[1967redrider]

Sweet ones, bighomer, ww, Ivory and Dan.

[woodwalker]

Sweet ones, bighomer, ww, Ivory and Dan.

Thanks Rider!!

[cody6268]

Great carries from everyone, as usual! Mine for today are a newly acquired Marble's GI Jack, a modified Camillus 27, the Izula II, and a Leatherman Rebar.

14 March 2023 Carry.jpg

Nice group!

I horribly abused my Marble's USGI Utility, and the worst I was able to do was bend the screwdriver (paint can that was a little too crusty). At least they are super-cheap to replace if something happens to them--which is why it's my favorite work knife. I'm planning on adding that British Army clone to my order with the replacement and a couple of RRs I was looking at.

Soon, I am going to have a Boker that will be a doppelganger to your Camillus (but with some type of shield) after I get it sent off to Jeff. I got two Boker 9229s (the later, German-assembled version, but with "USA" on the tang) in a lot, and were both virtually unused except for some dunce trying to make the screwdrivers fit a Phillips screw, but completely butchering the job.

I have gone to the point that my go-to MTs are either the Rebar or Bond (and occasionally SwissTool Spirit XC if more stuff is needed). They are just as tough as the big Super Tool, but MUCH lighter. I can actually carry the Rebar or Bond loose in a pocket, while the SwissTool Spirit and up often need a sheath (the thick stainless slabs really add to the weight of the Spirit).

I used to always carry two flashlights--usually something like the i3T or i5T alongside the i1R, i1R 2, or i1R2 PRO clipped to my keys. The i1R family are very nice keychain flashlights, and as they evolved, got to the point that by the i1R2 and i1R2 PRO are pretty much so close in performance to the i3T and i5T, I've gone to just having the i1R only.

[Dan In MI]

Thank you, John and Cody!

[DM11]

[GSPTOPDOG]

a GSPTOPDOG-inspired carry is coming soon!

Now that is an EDC I am looking forward to seeing !!!

[cody6268]

Schrade USA 5OTG.

[1967redrider]

Nice ones, David and cody.

Going with a ZT 0566 that I customized myself with blue anodized screws and a Jade G-10 scale from Romania (maybe?). It still has the torsion bar so it's an assisted flipper.

[ken98k]

Making stress -cones today gut out the money makers.

[joeradza]

Small knife, big name. Rough Ryder brown burlap “tater skin” work knife.

[Dan In MI]

Knice carries, y'all!

[garddogg56]

Making stress -cones today gut out the money makers.

Thanx Ken

[DM11]

[JamieinWV]

Wednesday I was detailing cars so i didn’t think I needed a whopper knife today…33OT was perfect

[Ivoryman]

Small knife, big name. Rough Ryder brown burlap “tater skin” work knife.

That might be the best looking RR I've seen. Your pics make it. Really like the micarta, the lines, the swedge.

Wednesday I was detailing cars so i didn’t think I needed a whopper knife today…33OT was perfect

Great pic, love the car. But what I love most is the reflection of you in the tail light and paint. Great shot.

[bighomer]

Toted these today while working in the yard, the jade colored flipper got some serious work the Queen not so much.

[JamieinWV]

Small knife, big name. Rough Ryder brown burlap “tater skin” work knife.

That might be the best looking RR I've seen. Your pics make it. Really like the micarta, the lines, the swedge.

Wednesday I was detailing cars so i didn’t think I needed a whopper knife today…33OT was perfect

Great pic, love the car. But what I love most is the reflection of you in the tail light and paint. Great shot.

Thanks I’m surprised I normally have issues with reflection after the 4th adult beverage and that was around number 6…. Can’t detail sober..same excuse I use when mowing my yard when mowing season gets here… 23 and snow showers last night and some people around here has already started mowing…

[joeradza]

Small knife, big name. Rough Ryder brown burlap “tater skin” work knife.

That might be the best looking RR I've seen. Your pics make it. Really like the micarta, the lines, the swedge.

Thanks iman. I knew I liked it’s looks but I wasn’t sure about the size. It turns out except for a large “maybe” food knife, it does everything a pocketknife should.

[Quick Steel]

[roseandthistlecustom]