wood burning

mrwatch · Post by **mrwatch** » Sun Jul 15, 2018 10:14 pm

Took pictures of some of my wood burning. squirrel in front of tree. pre-historic North American Mastodon. A long time ago. enjoy

doglegg · Post by **doglegg** » Mon Jul 16, 2018 12:10 am

MRW, you certainly have a fine hand. Those are great, especially the last one. Very good.

Doug51 · Post by **Doug51** » Mon Jul 16, 2018 1:59 am

Quick Steel · Post by **Quick Steel** » Mon Jul 16, 2018 2:02 am

mrwatch, what I am wondering is what tool or implements do you use to accomplish your wonderful art. For that matter, what kind of wood?

mrwatch · Post by **mrwatch** » Mon Jul 16, 2018 10:47 am

Thanks, I use a Detail Master with a couple of different hand pieces. The Mastodon was when I got it used with a razor sharp or modified tip. It broke and I sent it in the be repaired. The plywood used for that one was a left over piece from the local Chris Craft boat factory. Given to me by a retiree. Sweet to use and wished he had more. The squirrel's leaves were hand colored with wet pastel pencils, which were kinda pricey. I also do charcoal and pencil drawing.

mrwatch · Post by **mrwatch** » Mon Jul 16, 2018 10:49 am

another.

dlr110 · Post by **dlr110** » Mon Oct 24, 2022 10:19 pm

This thread hasn't been used in a while!
I've decided I want to try some wood burning on my knife displays I make so I bought a new burner.
It's from WEP Tools and I ordered this off of Amazon because with all the Christmas decorations and
such that Cheryl has ordered I got it with just my points, no cash...

Now I need to get
busy and do some practicing.

C-WADE7 · Post by **C-WADE7** » Tue Oct 25, 2022 12:10 am

dlr110 wrote: ↑Mon Oct 24, 2022 10:19 pm This thread hasn't been used in a while!
I've decided I want to try some wood burning on my knife displays I make so I bought a new burner…

Good deal, especially using the points to buy it! Let us know how well it works. I have a Nibsburner brand solid state burner, Colwood and Razetip seem to be the premium ones, but I’m not slburnind scenes or portraits, I use it to burn fur, hair or lines for clothing on my whittling projects. I did this bear with mine.

dlr110 · Post by **dlr110** » Tue Oct 25, 2022 1:59 pm

WOW!! That's a great job....

C-WADE7 · Post by **C-WADE7** » Wed Oct 26, 2022 1:40 am

Thanks, I used burning only for the fur in this one, it’s a lot of little lines. I have another I made and used a gouge to make deep fur lines and highlighted them with the burner.

dlr110 · Post by **dlr110** » Fri Oct 28, 2022 12:41 am

No laughing!
I finally got to practice and try the different tips to see exactly what each one did.
That darn thing has like 25 different ones. So this was my first attempt and I
used pages that were intended for kids to color. I'll practice some more and you
can laugh now....

C-WADE7 · Post by **C-WADE7** » Fri Oct 28, 2022 1:48 am

Looking good. Play with the temp and you can get lines with out as much darkness and even shade.

dlr110 · Post by **dlr110** » Fri Oct 28, 2022 2:30 am

C-WADE7 wrote: ↑Fri Oct 28, 2022 1:48 am Looking good. Play with the temp and you can get lines with out as much darkness and even shade.

Thank you, I'll give it a try...

dlr110 · Post by **dlr110** » Wed Nov 02, 2022 2:04 am

I bought a bag of these 3 to 3 1/2" wood disks and decided to make 2022 Christmas tree ornaments for all of my kids and grandkids. Here are pictures of some of them. They are the front and then the backs. They're pretty amateur but hopefully I'll improve.

C-WADE7 · Post by **C-WADE7** » Wed Nov 02, 2022 2:46 am

dlr110 wrote: ↑Wed Nov 02, 2022 2:04 am I bought a bag of these 3 to 3 1/2" wood disks and decided to make 2022 Christmas tree ornaments for all of my kids and grandkids. Here are pictures of some of them. They are the front and then the backs. They're pretty amateur but hopefully I'll improve.
20221101_165945.jpg20221101_170033.jpg20221101_170116.jpg20221101_170150.jpg

They look great, and will be a treasured addition to the tree I’m sure. Keep up the good work!

doglegg · Post by **doglegg** » Wed Nov 02, 2022 2:02 pm

They look good David.

dlr110 · Post by **dlr110** » Fri Nov 11, 2022 2:59 am

Did this wood burning this evening and I've been working on the other decorations for Cheryl.
On the deer I'm thinking about a light stain and then some polyurethane.
Got a Santa wood burning I'm going to try tomorrow.

dlr110 · Post by **dlr110** » Tue Nov 15, 2022 1:43 am

I know you are most likely bored with my new found hobby but this is the last of the Christmas wood burnings …..I think.

I put a stain on the deer and the Santa and then some polyurethane on all three of them. Won't win any prizes but they're not to bad for an old goat like me.

C-WADE7 · Post by **C-WADE7** » Tue Nov 15, 2022 2:38 am

They look great David! I guess I missed the post before but I was going to recommend a golden oak or similar stain, it sets off the contrast of the burning nicely. Keep up the work and keep posting your projects for us, I know I enjoy them.

dlr110 · Post by **dlr110** » Tue Nov 15, 2022 2:50 am

C-WADE7 wrote: ↑Tue Nov 15, 2022 2:38 am They look great David! I guess I missed the post before but I was going to recommend a golden oak or similar stain, it sets off the contrast of the burning nicely. Keep up the work and keep posting your projects for us, I know I enjoy them.

Thank you Sir I appreciate that very much...

Reverand · Post by **Reverand** » Thu Nov 17, 2022 3:17 am

dlr110 · Post by **dlr110** » Sun Nov 27, 2022 2:30 pm

I just couldn't stay away from the wood burning projects.
Here are some more wood burning projects I've done, I just haven't put any stain or finish on them yet.
The first one is a serving tray for Cheryl.
The next one is a stained glass pattern.
The next one is a plaque for CCC knives.
The last one is a plaque for a John Wayne commemorative trapper I have.
I'm also doing a plaque for AAPK knives, I just haven't started it yet.

C-WADE7 · Post by **C-WADE7** » Sun Nov 27, 2022 4:04 pm

Great work!! The knife on the CCC looks great.

dlr110 · Post by **dlr110** » Mon Dec 05, 2022 10:44 pm

These are the latest I've done.
The Bear/Indian and the sailing ship I gave as gifts.
The last one is from a picture of Cheryl and I. I made a pencil drawing of it on the computer then transferred
it to the wood.
.

C-WADE7 · Post by **C-WADE7** » Tue Dec 06, 2022 1:17 am

Wow!! You are knocking out some great work!

All About Pocket Knives

wood burning

wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning

Re: wood burning