What is this type of blade used for?

[Nev52]

I just repaired this old Kutmaster knife. I thought this one blade was unusual. I was wondering if someone can tell what it would be used for.

Thank you
Nev

[edge213]

I just repaired this old Kutmaster knife. I thought this one blade was unusual. I was wondering if someone can tell what it would be used for.

Thank you
Nev
kutmaster.jpgkutmaster tang.jpg

Can opener

[1967redrider]

A hungry man's can opener at that! It would be easier to use a Ka-Bar to open a can in my opinion.

[Mumbleypeg]

Here is a good review of the more commonly found can opener designs, including the OP style. viewtopic.php?f=2&t=56338

Ken

[Nev52]

Thanks Edge,
I am one dumb @ss. I should have figured that. Just looked different than what I have seen.

Thank again.

Nev

[Nev52]

Here is a good review of the more commonly found can opener designs, including the OP style. viewtopic.php?f=2&t=56338

Ken

Thanks Ken
Very good article

Nev.

[Mumbleypeg]

The thanks goes to OC - he did all the work.

Ken

[edge213]

Thanks Edge,
I am one dumb @ss. I should have figured that. Just looked different than what I have seen.

Thank again.

Nev

[OLDE CUTLER]

The thanks goes to OC - he did all the work.

Ken

Thanks, Ken. I have to say that the Kutmaster canopener shown in the OP was one of the most difficult to use in the test I did and had to be very sharp to work at all.

[Nev52]

The thanks goes to OC - he did all the work.

Ken

Thanks, Ken. I have to say that the Kutmaster canopener shown in the OP was one of the most difficult to use in the test I did and had to be very sharp to work at all.

Well I can tell you it was sharp. I cut the palm of my had closing it
Thanks (OC ) Jim for the information.
Nev

[philco]

I have an older Imperial scout knife with that type of can opener. Just a few days ago I took it on a test run to see how it did opening a can of tuna. It was definitely harder to manipulate than some of the newer styles but I did manage to keep from going hungry.