All Scagel Products
Case 6250 Toenail 1980 No Dots Factory Mint Elephant Etch Wood Handles Brass Liners And Pins
Never used or carried. Factory edge and snap. A mint knife that couild use some elbow grease to clean up a few spots. Wood handles held down by 5 nickel pins, Nickel bolsters and shield. 4 1/4"...
Sold Out
Item # 115056
$249.50
Spanish Clasp Knife Hand made New Sheepfoot blade marked Palles Solsona 4" Closed Light Weight
The Pallares company in Solsona Spain have been making knives since 1917. This one is a light weight clasp knife, 4" closed with a sheepfoot carbon blade. Translucent yellow handle ijn a dogleg...
Sold Out
Item # 115055
$10.00
Case XX 1940-65 4 Blade Congress Jigged Red Bone 4" Closed No Damage No repairs Factory Snap
Knife shows signs of some use but much less than normal for it's age as blades are very close to full. I feel it dates closer to the 40's. A true sock drawer knife, it needed only dust and lint...
Sold Out
Item # 115050
$324.50
Hubertus Henning Riter Special 12 Size Yellow Micarta Mint File Work Nickel Liners And Solid Bolster
If Iunderstand correctly, this was a special run at the Ritter factory in the 70's, done in Westinghouse micarta with large domed nickel pins, solid nickel bolsters and liners. Factory...
Sold Out
Item # 115010
$299.50
Case Stainless Sod Buster 10 Dot 2138 SS Unused factory Edge Gator Snap 4 5/8" Closed
A Case Sod Buster, 10 dots stainless steel pattern 2138 SS as stamped on the tangs. 4 5/8" closed in mostly factory condition, never honed. The slick black handles are held down by two brass pins...
Sold Out
Item # 114870
$69.50
Valor Miami FL Ron Lake Design 4 1/2" Closed Tab Lock Ebony Insert NoBlade Wear Pocket Carry
An original Ron Lake goes for thousands...Here's a 1970's Valor, made in Japan in 440c. At 4 1/2" closed, it's a large kife with some weight to it. Brass liners and a highly polished frame with a...
Sold Out
Item # 114869
$55.50
Carl Schlieper Eye Brand Sod Buster 4 3/4" Closed Hardwood Scroll Blade Eye Over Germany Tang Used
Full mirror polish is there with a few stains and some tarnish. Mabye honed once. Full blade etch tang has Eye over germany. DRGM and numbers. It looks to be late 70's to me..Dark hardwood...
Sold Out
Item # 114868
$49.50
Utster Boy Scout Knife 1950's-60's Light Use Delrin Handles Full Blades With Snap Nickel Bolsters
Just a few blems here and there but a very lightl;y used scout kife with four blades and a stainless bail. three brass pins hold down the jigged Delrin handles. All blades have a loud snap. Nickel...
Sold Out
Item # 114864
$34.50
Camillus Folding Saw 12 TPI 1990's Zytel Handle Top Lock Factory Mint Thumb Ramp
This Camillus folding saw has 12 teeth per inch so it should make short work of just about any wood. 5 1/2" closed, the Zytel feels dry in wet conditions. The L6 saw blade is what most saws are...
Sold Out
Item # 114863
$14.50
Boker SolingenJigged Black 3 1/4" Closed All Blades Loud Snap Both Ways Shield date It To easrly50's
At first, I thought it was jigged bone but closer inspection it is jigged black. This material was used during the war years since other material was difficult to obtain so Boker was beginning to...
Sold Out
Item # 114861
$49.25
Boker Exskelibur Early Model 4.5 " Handle Ti Liners And Lock Bogwood Handles 440c Thumb Ramp
A collaberation between Mike Skellern and Fred Burger and produced for the mass market by Boker. This is an early model, larger than ones produced today at 4.5" closed. The bogwood/morta handles...
Sold Out
Item # 114860
$67.50
Normark 1970's Folding Filet/Camp Knife Factory Mint Hardwood Handles Top Lock EKA Made Swedenk
Today, Normark is still in business as Rapala. This knife dates to the 1970's and comes in its original cammo sheath, 6" closed, you can see the blade flex in one of the pics. All brass hardware,...
Sold Out
Item # 114859
$34.95
Kurt Gutmann Co. Othello Germany Fixed Blade 9 1/2" OAL Wood With Finger Grooves Thumb Ramp
Made by Anton Wingen under their Othello brand and so stamped on the mark side tang. Pile side has GC Co, 49 for the year made. Made in Solingen Germany. Appears to have the factory edge with some...
Sold Out
Item # 114820
$64.75
Case XX USA Six Dot Hawk Walnut Handles 4" Closed Never Carried Or Used Factory Mirror Polished
This is a six dot 1976 hawk, 11011. Never carried or cleaned. Brass liners, walnut handles held down by four brass pins. 1/2 stop, tight pull. Factory in every respect. Lanyard hole, factory...
Sold Out
Item # 114771
$91.25
Case XX USA Three Dot Stockman Jigged Dark Brown 4" Closed Never Carried Factory In Every Respect
This is not a cleaned knife! Three dot 1973 vintage with dark brown jigged bone handles, nickel bolsters, liners and pinned shield. All blades very hard pull and loud snaps. All blades are mirror...
Sold Out
Item # 114768
$99.25
Case XX USA Cheetah 6111 1/2 L 4 1/4" Closed 10 Dot? Used Perfect jigged Handles Nickel Bolsters
I have sure been busy finding stuff. This one had to be cleaned and polished to be a presentable EDC. Factory tight lockup. Loud snap closed. I don't think it was ever used, just left to tarnish...
Sold Out
Item # 114645
$56.50
Case Tested Long Tail Toothpick 5 1/2" Closed 1920-40 Repaired Nearly Full blade Tight Lock uUp
I mentioned on the Case site that the handle repair looked like the Borg's eye on Star Trek. Looks like a mechanic that knew the way to form white lead as you can see, it is still holding after...
Sold Out
Item # 114644
$79.50
Buck 860 Hartsook 860 Ultra Lite S30V BOS Mint Kydex Sheath Ultra High Whistle 5" OAL " OAL
Anice camp/hike knife. Mint, Thumb cutouts on False edge. Tight button release. Whistle at the bottom! Knife marked Buck USA/BOS 860+S30V steel. Nice tight fit in...
Sold Out
Item # 113661
$49.00
Buck 055 Ebony Handle Date Code + 1991 Mint Factory Edge 3 1/2" Closed
This is a 1991 made Buck 055, small folding 3 1/2" model with true ebony handles. Curved brass bolsters and frame. Tang stamped Buck 055+ usa. Factory specifications, tab...
Sold Out
Item # 113524
$59.50
Tom Enos Guild member Belt Buckle Made In 2000 Tool Steel For 1" Belt Tang Stamped
Tom lived inside the Disney property in Orlando FL. He was these first and went to court with Disney. Disney lost and had to pay Tom for his court costs. Tom passed six years ago...Buckle made of...
Sold Out
Item # 112771
$34.50
Buck 532 Custom Anvil Tang Stamp Mirror Polish Ram Horn Handles File Work Inside And Out
This is a Buck model 532, 4 3/8" closed. Is the blade BG42? I don't know for sure but the Anvil logo dates it to 2002 and that would make BG42 possible. Nickel bolsters and liners with...
Sold Out
Item # 112695
$169.50
Imperial Ireland 2" Key Fob Lock Back Folder With Bail Light Use Tight Tiger Snap Fiber Handles
At this time, Imperial was owned by Schrade but the operation in Ireland closed in 1980 so not many knives were made there. This 2 inch key fob model is a minature of the large folding hunter....
Sold Out
Item # 112590
$10.00
A.W. Wadsworth & Son Germany 2 Blade Barlow Wood Factory Mint Steel Bolsters Liners Kastor Import
A.W. Wadsworth was an imaginary name used by Adolf Kastor Bros. a NYC import co. from the 1870's to 1963. They owned a factory in Germany, Germania works in Solingen and imported their knives up...
Sold Out
Item # 112588
$97.50
Sears Craftsman Stockman Beige Smooth Delrin Long Pull Used Tight All Blades Snap Nickel Bolsters
This model dates to the 60'-70's. A stockman pattern, #95045, USA made for Sears by Camillus. 4" closed, three brass pins hold down the Delrin. 7/8" Craftsman Sears Shield in nickel, as re...
Sold Out
Item # 112587
$21.50
Cutco Hunting Knife Early 60's Tang Stamped 1065 USA made 10 1/2" OAL Lamb Designed Gator Sheath
Thomas Lamb designed the wedge lock ergonomic handle for this knife, first produced in 1960 with the patent number 390544 on the front handle near the bolster. The blade is tarnished and has some...
Sold Out
Item # 112577
$149.50
Case XXX Bradford PA G ROG 62100SS Saddle horn 1990 ABCA LE Of 2500 Green Bone Factory Mint
Jim Parker owned Case at the time this knife was made. He had leveridged his other knife businesses to pull off the Case purchase and he would file for bankruptcy in 1991. The ABCA was an...
Sold Out
Item # 112575
$229.50
Case One Dot 6254 SS Jigged Brown Bone Trapper 4 1/8" Closed Factory Mint Never Used Or Carried
A big trapper, 4 1/8" closed, factory edge, mint. Nice two tone jigged bone handles held down by three brass rivets. Nickel shield, bolsters, pinched in the front. One dot next to the lightning...
Sold Out
Item # 112523
$59.50
Case XX USA One Dot 1979 A 62351/2 Appaloosa Factory Mint Nickel Bolsters Pins Brass Liners
Never used or carried. Factory tight and wicked snap. 3 14" closed, three nickel pins hold down the Appaloosa bone handles. Made in 1979. Mirror polished, no AI description here, Iknow what I'm...
Sold Out
Item # 112520
$84.50
Parker Eagle Brand Stockman Mint Saw Cut Delrin 4" Closed Brass Eagle Shield Only
Jim Parker came out with the eagle brand in the mid 70's. This one dates to that period but it was made by Camillus in saw cut Delrin. 4" closed in the stockman pattern. No tang stamps, just the...
Sold Out
Item # 112511
$24.50
Schrade Walden NY Paratrooper/Hunter Jigged Rough Black handles Works No Peek Cleaned mirror Polish
Schrade Walden NY switch blade, Paratrooper model. This is a great looking and operating knife. Schrade used a DuPont material that did not shrink, so the handles, held down by 5 brass pins, look...
Sold Out
Item # 112496
$369.25
Parker Edwards 2 Blade Stockman Stag Handles Made in Alabama Factory Mint 1984-87 Mfg.
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c 2 bladed folder, 3 1/2" closed. Tang pattern number is...
Sold Out
Item # 111421
$49.50
Parker Edwards 3 Blade Stockman Dark Wood Made in Alabama Not Damascus Factory Mint 1984-87 Mfg.
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c three bladed folder, 4" closed. Tang pattern number is stamped:...
Sold Out
Item # 111418
$31.50
Parker Edwards Apaloosa Jigged Bone Stockman Made in Alabama Not Damascus Factory Mint 1984-87 Mfg.
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c two bladed folder. 3 1/2" closed, tang pattern number is stamped:...
Sold Out
Item # 111416
$39.50
Beretta Seki japan Custom Series 2 1/2" Closed Stainless Frame Wood Insert Factory Mint Mirror Polis
This 90's folder is factory mint in every respect. 2 1/2" closed, top lock and a lanyard hol;e. Stainless frame with a hardwood insert. Frame is beveled all around. Mirror polished blade tang...
Sold Out
Item # 111401
$18.50
Silver Snipe Bridgedale Japan Stainless Mint Factory Edge 4" Closed Nickel hardware Wood Handles
Made for Bridgedale in the 80's in Seki japan. 440c stainless, Dark wood handles held down by four nickel pins. Nickel bolsters, brass liners, Top lock. Blade locks tight, loud walk and...
Sold Out
Item # 111377
$19.50
Lone Ranger Red 60th Anniv. 2 Blade Bail 3 1/8" Closed Factory Condition 1/2 Stop Tight Snaps Both
Made in 1993 to celebrate the 60th anniversary of the series. The master blade has a serial number 0460 which makes this knife one of a set of four that was produced by Camillus. Tight, factory...
Sold Out
Item # 111375
$24.50
Case NKCA Jigged White Bone 5 1/2" Closed Mint 15th Anniversary Case XX .SS USA
Sad how the NKCA was raped and pillaged by its own directors. Cargill etc. This 15th anniversary knife is a beaut. 5 1/2" inches closed, jigged white bone held down by 5 brass pins. Mirror...
Sold Out
Item # 111374
$119.50
Camillus USA 872 Lobster Money Clip 2" Closed Santa Fe Stone Works Lapis Lazurli And Pearl N
Santa Fe started in 1978 so this one would date to that time period due to the Camillus tang stamp. 2" closed, a lobster pattern with a pen and file blade with a money clip on the reverse. Nickel...
Sold Out
Item # 111347
$38.50
Camillus Knife Santa Fe Stone Works Handle Other Side Wood Knife Is Mint Last Camillus Tang Stamp
Santa Fe began in 1978. I think this one dates to the mid 80's. Look closely at the stone work. This is the knife you will receive. 3" closed. Stones inset appear to be green and blue malachite...
Sold Out
Item # 111345
$37.50
Funy Folder Stainless 4" Closed Edge Brand Gutmann Cutlery Blade Stamped Edge Co. Stainless Taiwan
Gutmann Cutlery specialized in copies of other designs and this is one that was originally made in Italy. The blade is conceiled in a stainless handle and can be deployed by one hand. A...
Sold Out
Item # 111330
$29.50
G. Sakai Backpacker Early 90's Solid Aluminum With Rubber Insert Seki JapanATS34 Full Serrated
The Sakai brand of knives began in 1958 in Seki Japan and continue today. This model is the backpacker, tab lock, 3 1/4" closed, solid aluminum handles with a rubber insert with the Sakai logo and...
Sold Out
Item # 111328
$49.50
Camillus Santa Fe Stone Works Tuxedo Pearl And Jet 3" Closed Never Used 1/2 Stop Tight Loud Snap
The knife, itself, has a tang stamp that dates it to 1960's to early 70's but Santa Fe started in 1978. Anyway, one side is mother of pearl with jet (stone) inserts. The other side is hard wood....
Sold Out
Item # 111256
$72.50
Camillus 4" Closed 1989 Factory Mint Riders Of The Silver Screen Tonto Lone Ranger Large Heavy
This one is a large cigar equal end that measures 4 1/4" closed and 1/2" wide! Three nickel pins hold down the plexiglas handles that have old time movie scenes on either side. The tang stamp is...
Sold Out
Item # 111254
$32.50
TL 29 Kutmaster Utica NY War Years Brass And Steel liners, Bolsters, Bail And Liner Lock 4" Closed
Tang stamped: Kutmaster utica N.Y. USA. Secondary blade locks. Heavy, steel hardware. Hardwood handles are held down by 4 brass pins, brass liners with a steel liner between back springs, Long...
Sold Out
Item # 111196
$29.50
Hubertus Ritter Springer Mint Gnarly Stag 3 1/2" Closed Threaded Bolsters Factory Working Order
3 1/2" closed with nice stag handles. Mirror polished blade, early 80's knife. Factory edge and function. Out with authority and...
Sold Out
Item # 111195
$154.50
Miller Bros. Meriden CT Moose Pattern Equal End 4 1/4" Closed Jigged Bone Loud Snap Both Blades
The Miller Bros. Co. was formed in 1856 in Meridan CT but did not start making knives until 1870. This knife dates to the 1880's. The moose pattern is always a big knife as in this case, a 4 1/4"...
Sold Out
Item # 111173
$124.50
Mechanic's Celluloid Mirror Nicholson File Logo 2" Diameter Mirror Perfect 1930's
From a mechanic's tool chest, a mirror used to wash up for lunch or to get home looking presentable. Once given away by tool suppliers, this one was from Nicholson Files. looks...
Sold Out
Item # 111093
$12.00
Parker Folding Hunter 5" Closed Mint Original Box Thumb Ramp Stainless Japan #K531 Brass Frame-531
A late 70's knife, a tiny little 'Japan' under the eagle. 5" closed, Hardwood handles, held down with 5 brass pins. Factory tight, solid lock up with thmb ramp. Original price tasg on box...
Sold Out
Item # 111081
$32.75
Gerber 625 Gator Mate Made in Portland USA Factory Mint First Production Run 4" Closed
This is a model 625 Gator Mate, made in Portland USA. 4" closed, The handle is a non slip rubberized polymer with a top blade lock spacer. Half serrated, stenciled 1st Production Run and tang...
Sold Out
Item # 111080
$34.50
Puma Lord 895 Mint Rockwell Sticker 3" Closed Gnarly Stag Date Code For 1987
This is a pristine mint Lord, model 895 3" closed. Thick gnarly Sambar stag held down by three brass pins. The date code corresponds to 1987. The blade has a long thumb guard...
Sold Out
Item # 111079
$249.75
Western Black Beauty F39 Stamped On Guard Used 9 1/2" Tang Stamped Western Boulder Colo USA
The model f39 has an upswept blade with long thumb guard. The handle is alternating aluminum and black fiber spacers with an aluminum guard and in this case, an early version with nF39 stamped on...
Sold Out
Item # 111000
$17.50
Ka-Bar Cole national 2 Blade Barlow Wood And Brass Never Used Mirror Polished Factory EdgeBox Papers
Paperwork inside is dated 1978 when Ka-Bar was owned by Cole National. Some tarnish on backsprings that will come off with elbow grease.. 3 1/2" closed, slant brass bolsters, Hardwood handle held...
Sold Out
Item # 110661
$74.50
Puma Fishermans Knife Boxes Only 2 Boxes Both With Instructions Dated 1964 Made In Germany
The larger box has some dry water damage at one end otherwise clean with no other damage but two hard to find items, if you have the knives. Instructions are in both boxes with 1964 date codes,...
Sold Out
Item # 110659
$15.00
Case Box Only Fly Fisher Disp. No, 53 Wax Paper Inside Perfect Condition
Nicebox, perfect conditioon with paper inside. For the Fly Fisher pattern, box only, no...
Sold Out
Item # 110657
$10.50
Marshall Wells Lapel Pin Zenith Knife Logo Began In 1930 Whitehead & Hoague Made Pin
Marshall Wells was a hardware wholesaler in Michigan and are still in business today. They contrated with all the then knife makers like Schrade, Case, Camillus, Pal for knives to sell in their...
Sold Out
Item # 110270
$25.50
Russell green River Works Spatula 9" OAL Pinned Wood Handle Looks Unused Pewter Bolster
Tarnished but appears unused, nice flexy spatula blade stamped Russell green River Works. 3 steel pins hold down the hardwood handle. Sorry can't date it for you but it's...
Sold Out
Item # 110269
$18.50
Al Mar Connection? Mint 3 3/8" Closed Hard Wood Handle Seki japan ATS-36 Drilled Through Bolsters
'Rugged'; out on the blade and 127 over 3 on the tang. Pile side reads Seki Japan ATS-36. Very well made and heavy for its size but the solid brass frame accounts for the weight. The steel...
Sold Out
Item # 110232
$37.50
Folding Hunter Solingen West Germany Mint 4 1/4" Closed Pheasant Insert lock Back Nickel Frame
'110' style tang stamped Soliongen West Germany so made before 1990. Sort of heavy due to the solid nickel frame. Lock back, with gold colored inserts on both sides. Absolutely mint. Tight lock up...
Sold Out
Item # 110223
$16.50
Buck 307 Pre Date Code Mint Factory Edge Never Used 4 1/4" Closed Slant Bolsters Saw Cut Delrin
Large at 4' closed, the 307 Wrangler is a jumbo storkman's pattern with saw cut Delrin handles, brass liners and pins. Never used, factory edges. Tight with alligator snap on all blades. Pre date...
Sold Out
Item # 110096
$129.50
Al Mar Seki City Japan Hawk Mint Factory Edge Stainless handles 3 3/8" Closed Lanyard Hole Top Lock
This is a Seki City Japan made Al Mar. 3 3/8" closed, never used or handled. Mint with a factory edge. Stainless handles, brass liners and a lanyard hole. A traditional pocket knife made in the...
Sold Out
Item # 110095
$79.50