This is an A.G. Russell 4" lockback made in Seki Japan by some of Japan's finest craftsmen. The handles are some remarkable Micarta that looks like fine wood grain that's been high polished....
This is a Queen made Robeson Pocketeze Muskrat. The handles are Rootbeer colored worm groove jigged bone that are chip and crack free. The blades are made of D2 tool steel and have not...
This is a Browning fixed blade made most likely by either Master Tak Fukuta or Hiro knives for Master Fukuta. These were made in the late 90's or early 2000's. This is one of 3000...
This gunstock pattern is iconic for the old Queen Cutlery. I've seen this gunstock pattern with dates going back into the late 70's and they all look about the same. This one has curly...
It's hard to find stag handled Doctor's knives and this one is a real looker. Made by Queen for SMKW after they purchased the brand many years ago, this is a Robeson Shuredge. The...
From my personal collection comes this GEC Northfield 97. The handles are sambar stag and are chip and crack free. The carbon steel blade has not been used or resharpened and retains...
From my personal collection comes this GEC Northfield 68 White Owl. The handles are cowhide jigged bone that is chip and crack free. The carbon steel blades have not been used or resharpened...
From my personal collection comes this GEC 35 Cattle Knife made in 2022. The handles are some very nicely colored ox blood red jigged bone that is chip and crack free. The carbon steel...
This is a beautiful small muskrat made by Schatt and Morgan back in 2010 for the 20th anniversary series, which means they only made 600 of these. The handles on this one are simply...
This is a Schatt and Morgan sleeveboard whittler with split backsprings. The handles are some warm black maple with some very nice lines on it. At the back top pin are a couple of...
This is a Winchester 4 blade sowbelly stockman made in 1998. Queen made the parts for these knives and there is plenty of debate as to whether Queen assembled and finished these or they were...
This is a Queen made Winchester knife made in 1989. When the Winchester brand was resurrected in the late 1980's, they chose Queen to make knives based on the patterns of the original...
This is an Aristocrat branded lockback called the Regent. If this looks familiar, that's because it's the exact same model that A.G. Russell had made in Seki Japan, I know I compared them...
From the 18th anniversary series comes this Pint Barlow made by Schatt and Morgan, only 600 or each pattern made for each anniversary series. Made in 2008. The handles are dark brown...
From the 18th anniversary series comes this 2008 Sowbelly Stockman made by Schatt and Morgan. Only 600 made. The handles are some very dark jigged bone that is chip and crack free....
This is a Hen and Rooster knife made during the time that A.G. Russell owned the brand in Solingen Germany. Made for the KCC in 1978 this one is number 2380. The handles are made of...
This is a Schatt and Morgan Harness Jack from the Daniels Select series of knives. The handles are chip and crack free reverse worm groove jigged black bone. The blades have not been...
This is a Marbles MSA Gladstone Mi Congress made in 2001. All the parts for these knives were speced and supplied by Schatt and Morgan's custom shop to Marbles MSA in Gladstone for final...
Marble Arms set out in 2001 to produce high quality American made traditional pocket knife patterns. They contracted with Queen to produce all the parts for these knives and they were...
This is a Henckels made by Boker Congress made in Solingen Germany. When Henckels contracted with Boker to make their pocket knives they required a higher standard of fit and finish and...
From a recent small collection of mostly Queen made knives comes this Rigid brand reverse Congress knife made by Canal Street Cutlery in 2007. All the parts for these knives were sourced...
Before there was Moki there was Lakota and this was one of their first patterns of knives that they patented and made. Designed and patented by Master Sakurai who is the head of Moki....
This is a Queen Cutlery rail splitter. The handles are chip and crack free buffalo horn that is dark with some beautiful grey lines. The D-2 tool steel blades have not been used or...
From my personal collection comes this GEC Northfield 83 lock back. The handles are dark brown jigged bone that is chip and crack free. The carbon steel blade has not been used or...
From my personal collection comes this GEC Northfield 94 with clip blade made in 2021. The handles are blue camel bone that is chip and crack free. The carbon steel blade has not been...
From my personal collection comes this GEC Northfield 49 made in 2021. The handles are some very deep dark garnet red bone that is chip and crack free. The carbon steel clip blade has...
From my personal collection comes this GEC Northfield 49 made in 2021. The handles are some very deep dark garnet red bone that is chip and crack free. The lambsfoot blade has not...
From my personal collection comes this GEC 49 with clip blade. The handles are acrylic that is chip and crack free. The blade has not been used or resharpened and retains it's factory...
From my personal collection comes this GEC 49 with lambsfoot blade. The handles are acrylic that is chip and crack free. The blade has not been used or resharpened and retains it's...
This is a Queen Cutlery Classic doctor's knife with spatula blade. These Queen Classics are made to what looks and feels like the same standard as the Schatt and Morgan line of knives....
This is a Robeson MasterCraft reverse peanut made by Queen for SMKW. SMKW bought the rights to the Robeson name back in the 80's and had Queen make several patterns for them, many of them...
This is a collaborative work with Bob Lum and Haruo Suetake (Owner of Suetake Cutlery, over 100 years old knifemaker in Seki). The blade is stamped with "Seki-Cut" on tang and etched with "LUM"...
This is a Cattaraugus Cutlery folding hunter. A.G. Russell had these made in Seki Japan in 1992 for the Knife Collectors Club, KCC, by some of Japan's finest craftsmen. This one has...
Queen made a lot of gunstock jack knives in the late 70's and early 80's and these are some of their finest work from that era. This is a Queen gunstock jack from the Master Cutler...
When Henckels stopped making their own pocket knives they contracted with Boker to make pocket knives for them and they required a higher standard and premium materials. This single bladed...
From a recent collection purchased from a fellow AAPK member comes this Kaufmann pipe fitters knife. The company etched on the side of the slick black handles is an wholesale appliance and...
From a recent collection purchased from a fellow AAPK member comes this Hen and Rooster Little Mustang Whittler. Made in Solingen Germany by Bertram Cutlery this whittler has dark blue...
From a recent collection purchased from a fellow AAPK member comes this Hen and Rooster Savage canoe made during the time period when A.G. Russell owned the Hen and Rooster brand. The...
From a recent collection purchased from a fellow AAPK member comes this pre 1975 Hen and Rooster engraved pen knife. The handles are stainless steel and are chip and crack free and very few...
From a recent collection purchased from a fellow AAPK member comes this old Buck 307 stockman. I haven't concentrated on Buck knives until recently and the more Buck knives I handle the more...
From a recent collection purchased from a fellow AAPK member comes this old Schrade Walden NY small stockman. The tang stamp on this indicates that this was made between 1954-1973 and it's...
From a recent collection purchased from a fellow AAPK member comes this Robert Klaus Kissing Cranes KC35 Brown Mule (Sodbuster). This is an older made in Germany model made with the good...
From a recent collection purchased from a fellow AAPK member comes this Kissing Cranes Brown Mule (Sodbuster). This is an older German made knife made with the good German steel. The...
From a recent collection purchased from a fellow AAPK member comes this 1964-69 era Case Sodbuster. The handles are slick black and are chip and crack free. The blade has not been used...
From a recent collection purchased from a fellow AAPK member comes this 1940-1964 era Case jack knife. The handles are slick black that is chip and crack free. The blades have not been...
From a recent collection purchased from a fellow AAPK member comes this Fighting Rooster muskrat. The handles are chip and crack free sambar stag. The blades have not been used or...
From a recent collection purchased from a fellow AAPK member comes this Great Eastern Cutlery Northfield Muskrat pattern #81. The handles are some very nice sambar stag that is chip and...
From a recent collection purchased from a fellow AAPK member. This is a pre 1975 Henckels made stockman. Made in the old school way of cutting the excess stag from the back of the slab...
From a recent small collection purchased from a fellow AAPK member. This is an early Boker produced Henckels Congress. In 1975 Henckels stopped producing their own pocketknives and...
This is a Paragon interframe lockback made in Seki Japan by some of Japan's finest craftsmen. Every Paragon knife I've collected and handled that was made in Japan, is amongst the best...
This is a Cattaraugus Cutlery small lockback made in Seki Japan by some of Japan's finest craftsmen. Made for the Knife Collector's Club by A.G. Russell this small lockback has brown jigged...
This is a rare knife since Queen only made these Damascus bladed knives 1 time in their history. They called this the Ranger and it's a liner lock designed by Justin Gingrich, his story is...
This is a 2003, although the blade is marked 2004, large Texas Toothpick. A.G. Russell started the commemorative Texas Ranger Series the year before, so this is the second year that they...
Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...
Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...
Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...
Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...
Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...
From a small collection of mostly Queen made knives comes this Robeson Pocketeze Trapper. The handles on this one are some of the finest looking I've had the pleasure to own. Root beer...
This is a Union Cutlery razor trapper made by Canal Street Cutlery. The handles are one of my absolute favorite, dark blue rope jigged bone that AAPK's own Eric Albers salvaged from Schrade...