Germany - Multi Tool With Glass Cutter.

[New_Windsor_NY]

A few days ago, my visit to the post office produced this multi tool pocket knife, with a glass cutter. It now becomes my latest example to be posted under this topic or thread. It also became the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a GELBROS Co., one blade, three tools (a cap lifter or bottle opener, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The main blade front tang stamp says, "GELBROS Co. (over) GERMANY" This is my eighth GELBROS Co., multi tool pocket knife, with a glass cutter. My other seven GELBROS Co., multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a SOFT half stop. The main blade does have a VERY GOOD opening snap. The main blade does have a VERY GOOD closing snap. The three tools ALL open, close, and function properly. Overall, this pocket knife is in EXCELLENT condition.
I did NOT have to clean it at all. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
GELBROS Co (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per the 12th edition
"OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
The GELBROS Co. multi tool pocket knife, with a glass cutter, that I posted back on Saturday,
February 10, 2024, was actually my FIFTH, GELBROS Co., multi tool pocket knife with a glass cutter.
In my description, I erroneously said that it was my THIRD, GELBROS Co., multi tool pocket knife with a glass cutter.

[New_Windsor_NY]

This afternoon, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my twenty-seventh MANOS, multi tool pocket knife, with a glass cutter. My other twenty-six MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. The secondary blade does have an OK half stop. The secondary blade does have an OK opening snap. The secondary blade does have a GOOD closing snap. The corkscrew opens and closes with no issues. The glass cutter opens and closes with no issues. Overall, this pocket knife is in GOOD condition. It did need a little bit of a cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Very recently, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also becomes the latest multi tool pocket knife, with a glass cutter, to join my collection. It is a SOLINGEN, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed (not including the bail), all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp only says, "SOLINGEN" Overall, this is my third SOLINGEN, multi tool with glass cutter, pocket knife. However, this is my second SOLINGEN, multi tool with glass cutter pocket knife, that is this particular pattern or style. My other two SOLINGEN, multi tool with glass cutter pocket knives, were BOTH previously posted, under this topic or thread. The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a GOOD half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The corkscrew opens and closes with no issues. The glass cutter opens and closes with no issues. Overall, this pocket knife is in GOOD condition. This pocket knife did require a little bit of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
SOLINGEN - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also becomes the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a SWAN WORKS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "SWAN WORKS (over) GERMANY" This is my third SWAN WORKS, multi tool with glass cutter, pocket knife. My other two SWAN WORKS, multi tool pocket knives, with a glass cutter, were both previously posted under this topic or thread. The main blade does have a WEAK half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The secondary blade also has a WEAK half stop. The secondary blade does have an OK opening snap. The secondary blade does NOT have a closing snap. The corkscrew opens and closes with no issues. The glass cutter opens and closes with no issues. Overall, this pocket knife is in VERY GOOD condition. It did require a VERY small amount of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
SWAN WORKS (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, "c 1920-present. A trademark used by Altenbach."
Per the 12th edition "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Swan Works (Germany) Altenbach 1901-1996."

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my twenty-eighth MANOS, multi tool pocket knife, with a glass cutter. My other twenty-seven MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). The main blade does have a SOFT half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The corkscrew opens and closes with no issues. The glass cutter opens and closes with no issues. Overall, this pocket knife is in VERY GOOD condition. It needed VERY little cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

This morning, my trip to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a FOREIGN, one blade, four tools (a can opener, a punch or awl, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade back tang stamp says, "FOREIGN" This is my first FOREIGN, multi-tool pocket knife, with a glass cutter. Although there is NO country of origin stamped or marked anywhere on this pocket knife, I have NO reason to doubt that it came from Germany. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The four tools ALL open and close properly, as designed, with no problems at all. Overall, this pocket knife is in GOOD condition. I did have to clean it up a little bit. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
FOREIGN - Main Blade Back Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this multi tool pocket knife, with a glass cutter. It now becomes my latest example to be posted under this topic or thread. It also became the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a GELBROS Co., two blades, two tools (a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed, all metal (the two "tortoise" handle scales are missing), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "GELBROS Co. (over) GERMANY" This is my ninth GELBROS Co., multi tool pocket knife, with a glass cutter. My other eight GELBROS Co., multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have an OK half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have an OK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The two tools BOTH open, close, and function properly. Overall, this pocket knife is in GOOD condition. I did have to clean it up a little bit. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
GELBROS Co (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per the 12th edition
"OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
The GELBROS Co. multi tool pocket knife, with a glass cutter, that I posted back on Saturday,
February 10, 2024, was actually my FIFTH, GELBROS Co., multi tool pocket knife with a glass cutter.
In my description, I erroneously said that it was my THIRD, GELBROS Co., multi tool pocket knife with a glass cutter.

[New_Windsor_NY]

Yesterday morning, my trip to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MADE IN GERMANY, one blade, four tools (a can opener, a punch or awl, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade front tang stamp says, "MADE IN (over) GERMANY" The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The four tools ALL open and close properly, as designed, with no problems at all. Overall, this pocket knife is in GOOD condition. I did have to clean it up a little bit. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

This morning, my visit to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MADE IN GERMANY, one blade, four tools (a can opener, a punch or awl, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade front tang stamp says, "MADE IN (over) GERMANY" The main blade does have an OK half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The four tools ALL open and close properly, as designed, without any problems. Overall, this pocket knife is in GOOD condition. I did clean it up just a little. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my twenty-ninth MANOS, multi tool pocket knife, with a glass cutter. My other twenty-eight MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). The main blade does NOT have a half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have an OK half stop. The secondary blade does have an OK opening snap. The secondary blade does have an OK closing snap. The corkscrew opens and closes with no problems. The glass cutter opens and closes with no problems. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

A couple of days ago, my visit to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also becomes the most recent example to be added to my multi tool, with a glass cutter, pocket knife collection. It is a GERMANY (RICHARTZ), one blade, four tools (a can opener, a punch or awl, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade front tang stamp is the image of a "WHALE (over) GERMANY" This is my third, RICHARTZ multi-tool with a glass cutter pocket knife. My other two RICHARTZ, multi tool with a glass cutter pocket knives, were posted by me, under this topic or thread. The main blade does NOT have a half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The four tools, the can opener, the punch or awl, the corkscrew and the glass cutter, ALL open and close properly, as designed, with no problems. Overall, this pocket knife is in EXCELLENT condition. It did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
RICHARTZ - WHALE (image) (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: Per GOINS' 1998 Edition, c 1900-present. Variety Of Tang Stamps, Same Dates.

[New_Windsor_NY]

Yesterday morning, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is yet another MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirtieth MANOS, multi tool pocket knife, with a glass cutter. My other twenty-nine MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade, BENT, does have a GOOD half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The corkscrew opens and closes with no problems. The glass cutter opens and closes with no problems. Overall, this pocket knife is in GOOD condition. It did need a little bit of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this multi tool pocket knife, with a glass cutter. It now becomes my latest example to be posted under this topic or thread. It also became the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a GELBROS Co., one blade, three tools (a cap lifter or bottle opener, a corkscrew, and a glass cutter), one tang stamp, 3 5/8" closed, all metal, multi tool, pocket knife. The main blade front tang stamp says, "GELBROS Co. (over) GERMANY" This is my tenth GELBROS Co., multi tool pocket knife, with a glass cutter. My other nine GELBROS Co., multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a VERY GOOD half stop. The main blade does have a VERY GOOD opening snap. The main blade does have a NASTY closing snap. The three tools ALL open, close, and function properly. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
GELBROS Co (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per the 12th edition
"OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
The GELBROS Co. multi tool pocket knife, with a glass cutter, that I posted back on Saturday,
February 10, 2024, was actually my FIFTH, GELBROS Co., multi tool pocket knife with a glass cutter.
In my description, I erroneously said that it was my THIRD, GELBROS Co., multi tool pocket knife with a glass cutter.

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is yet another MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirty-first MANOS, multi tool pocket knife, with a glass cutter. My other thirty MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). Both blades have suffered metal loss, but both blades have kept their profiles. The main blade does have a SOFT half stop. The main blade does have a SOFT opening snap. The main blade does have a SOFT closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have an OK opening snap. The secondary blade does have an OK closing snap. The corkscrew opens and closes with no problems. The glass cutter opens and closes with no problems. Overall, this pocket knife is still in GOOD condition. It did require a little bit of cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MADE IN GERMANY, one blade, four tools (a can opener, a punch or awl, a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade front tang stamp says, "MADE IN (over) GERMANY" The main blade does have an OK half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The four tools ALL open and close properly, as designed, without any problems. This pocket knife is in VERY GOOD condition. It did a little cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

I have yet to see, let alone acquire, a multi tool with glass cutter pocket knife, like the one that is depicted in the first picture posted below. The closest that I've come, is my multi tool with glass cutter pocket knife, that is in the #2 and #3 pictures posted below. Mine is from the DIXON CUTLERY Cᴏ̲ , GERMANY. Mine does NOT have the Prest-O-Lite cutout.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[Miller Bro's]

I have yet to see, let alone acquire, a multi tool with glass cutter pocket knife, like the one that is depicted in the first picture posted below.

now you got me thinking Skip.

I'm going to have to look around and see if I have one

[New_Windsor_NY]

So Dimitri, you're WONDERING if you have a "Wonder Knife."
Sorry, I couldn't resist.

[Miller Bro's]

[New_Windsor_NY]

Yesterday afternoon, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is another MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The glass cutter tool is missing the cutting wheel. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirty-second MANOS, multi tool pocket knife, with a glass cutter. My other thirty-one MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread (one is missing the glass cutter tool). The main blade does have a SOFT half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The corkscrew opens and closes with no problems. The glass cutter tool is broken. Overall, this pocket knife is in GOOD condition. It did require a little bit of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

A few days ago, my visit to the post office produced this multi tool, pocket knife, with a glass cutter. It now becomes my latest example to be posted under this topic or thread. It also became the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a GELBROS Co., one blade, four tools (a cap lifter or bottle opener with a screwdriver, a corkscrew, and a glass cutter), one tang stamp, 3 5/8" closed, all metal, multi tool, pocket knife. The main blade front tang stamp says, "GELBROS Co. (over) GERMANY" This is my eleventh GELBROS Co., multi tool pocket knife, with a glass cutter. My other ten GELBROS Co., multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. This main blade does have a VERY GOOD half stop. This main blade does have a VERY GOOD opening snap. This main blade does have a VERY GOOD closing snap. ALL the tools open and close without any issues. This pocket knife is in GOOD condition. It needed little cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
GELBROS Co (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per the 12th edition
"OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
The GELBROS Co. multi tool pocket knife, with a glass cutter, that I posted back on Saturday,
February 10, 2024, was actually my FIFTH, GELBROS Co., multi tool pocket knife with a glass cutter.
In my description, I erroneously said that it was my THIRD, GELBROS Co., multi tool pocket knife with a glass cutter.

[New_Windsor_NY]

Recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is yet another MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirty-third MANOS, multi tool pocket knife, with a glass cutter. My other thirty-two MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. One knife is missing the glass cutter tool. Another knife has a broken glass cutter tool. This main blade does have a WEAK half stop. This main blade does have an OK opening snap. This main blade does have a GOOD closing snap. This secondary blade does have a WEAK half stop. This secondary blade does have a VERY GOOD opening snap. This secondary blade does have a VERY GOOD closing snap. The two tools open and close with no issues. This pocket knife is in VERY GOOD condition. It did need a little bit of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Very recently, my visit to the post office produced this multi tool pocket knife, with a glass cutter. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my pocket knife, with a glass cutter, collection. It is an A - G & J - PRODUCT, one blade, two tools (a can opener and a glass cutter), three tang stamps, 3 5/8" closed (NOT including the bail), all metal, pocket knife. The main blade front tang stamp says, "A (over) G & J (over) PRODUCT" (inside a rhombus). The main blade back tang stamp says, "GERMANY" The glass cutter tool, front stamp, is a "Flaming Pineapple"(?) symbol or logo with NO text. This is my sixth, "A - G & J PRODUCT", multi-tool with glass cutter, pocket knife. My other five, A - G & J PRODUCT, multi-tool with glass cutter pocket knives, have ALL been previously posted, under and throughout, this topic or thread. This main blade does have a GOOD half stop. This main blade does have a GOOD opening snap. This main blade does have a VERY GOOD closing snap. Both of the tools open and close without any problems. Overall, this pocket knife is in VERY GOOD condition. It did require a VERY minor cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
A (over) G & J (over) PRODUCT (Inside A Rhombus) - Main Blade Front Tang Stamp.
GERMANY - Main Blade Back Tang Stamp.
"Flaming Pineapple"(?) Logo Or Symbol - Glass Cutter Stamp.
INFORMATION: None

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is yet another MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirty-fourth MANOS, multi tool pocket knife, with a glass cutter. My other thirty-three MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. One knife is missing the glass cutter tool. Another knife has a broken glass cutter tool. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does NOT have a half stop. The secondary blade does NOT have an opening snap. The secondary blade does NOT have a closing snap. Both tools open and close with no problems. Overall, this pocket knife is in GOOD condition. It did NOT need any cleaning at all. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[New_Windsor_NY]

Very recently, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my thirty-fifth MANOS, multi tool pocket knife, with a glass cutter. My other thirty-four MANOS, multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. One knife is missing the glass cutter tool. Another knife has a broken glass cutter tool. The main blade does have a GOOD half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have an OK opening snap. The secondary blade does have an OK closing snap. Both the corkscrew and the glass cutter, open and close with no issues. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.