Page 1 of 1
Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 12:41 am
by TrickyRick
Having been selected as custodian of dad's knives felt it would be good to find a better storage than in the cardboard boxes he was using. It's one of the tool cases I used as a field service rep years ago, tossed in a couple desiccant packs, so probably should be OK in there until I can get around to doing an inventory and assessment. The area under the bottom pallet holds some of his fixed blade knives. I'm not a collector of knives so will be interesting to go through them and see what history they might reveal.
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 12:44 am
by TrickyRick
Forgot to add picture, hopefully it will attach
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 12:53 am
by enuf
Looks like you have a bit of researching to do, fair number of knives you have there. The guys on here are pretty darn helpful.
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 1:06 am
by TrickyRick
Yes, most of them I don't know about, few of course were gifts from me. Unfortunately he doesn't seem to remember much about the oldest ones. Will be fun trying to jog his memory when I catch him on one of his better days. I convinced him about 5 years ago to move from Tulsa to Grove to a retirement village, so he is just a few miles from me now. I'm guessing a few will need repair and a good cleaning, bet I can find some good tips and tricks from this forum on that.
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 1:12 am
by enuf
My dad has been gone a long time. Visit with him and record when you have a particular conversation about something you're wondering about, you'll appreciate it - I did not, my father's passing was quick and generally unexpected. I am from the Tulsa area also - welcome neighbor.
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 1:42 am
by Reverand
The toolkit is a great idea for knife storage.
I have been a technician for 34 years, and I have a couple of old toolkits lying around. I never thought to use them for knife storage!
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 4:05 am
by Mumbleypeg
Just be sure those elastic bands don’t emit anything (outgassing). I’ve had bad experiences with elastic bands in knife rolls damaging nickel silver bolsters and shields - metals not present in most tools.
How can you tell? I don’t know except after the fact when it’s too late. The damage appears similar to celluloid outgassing, but there were no celluloids in the roll. The knives were not celluloid, and were damaged beyond recovery - the resulting pitting is still present even though I cleaned them up. Too deep for light buffing.
Ken
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 10:30 am
by eveled
I like that re purposed tool kit.
I just recently founf my Dad’s tool kit and his Simpson 260 VOM.
Re: Storage solution for Dad's Knives
Posted: Sun Feb 11, 2024 9:05 pm
by TrickyRick
Mumbleypeg wrote: ↑Sun Feb 11, 2024 4:05 am
Just be sure those elastic bands don’t emit anything (outgassing). I’ve had bad experiences with elastic bands in knife rolls damaging nickel silver bolsters and shields - metals not present in most tools.
How can you tell? I don’t know except after the fact when it’s too late. The damage appears similar to celluloid outgassing, but there were no celluloids in the roll. The knives were not celluloid, and were damaged beyond recovery - the resulting pitting is still present even though I cleaned them up. Too deep for light buffing.
Ken
Re: Storage solution for Dad's Knives
Posted: Thu Feb 22, 2024 5:23 pm
by TrickyRick
Mumbleypeg wrote: ↑Sun Feb 11, 2024 4:05 am
Just be sure those elastic bands don’t emit anything (outgassing). I’ve had bad experiences with elastic bands in knife rolls damaging nickel silver bolsters and shields - metals not present in most tools.
How can you tell? I don’t know except after the fact when it’s too late. The damage appears similar to celluloid outgassing, but there were no celluloids in the roll. The knives were not celluloid, and were damaged beyond recovery - the resulting pitting is still present even though I cleaned them up. Too deep for light buffing.
Ken
Thanks for the info about outgassing, after reading some about celluloid outgassing I decided to take the pallets out of the tool case and hang them on the wall in my closet. Hopefully that will avoid the problem.
Re: Storage solution for Dad's Knives
Posted: Thu Feb 22, 2024 8:48 pm
by Mumbleypeg
they might have been okay, but better safe than sorry.
Ken
Re: Storage solution for Dad's Knives
Posted: Mon Mar 11, 2024 12:57 am
by TrickyRick
After couple of weeks having my dad's knives stowed on the tool pallets in the gun safe in my closet, decided they deserved a better home. Went through the wood shed and found enough red cedar to build a home for most of his favorite pocket knives. They now hang out just above my desk in the workshop and I can keep them handy and think of my dad each day.
Re: Storage solution for Dad's Knives
Posted: Mon Mar 11, 2024 2:27 am
by philco
Kudos on an excellent display. Very well execuited
Re: Storage solution for Dad's Knives
Posted: Mon Mar 11, 2024 3:49 am
by enuf
very nice display case.
Re: Storage solution for Dad's Knives
Posted: Fri Mar 15, 2024 11:58 am
by TripleF
Vwey well done!!!