Page 31 of 46
Re: Ulster Collecting
Posted: Sun Apr 04, 2021 12:03 am
by Miller Bro's
Nice find Ken!
Re: Ulster Collecting
Posted: Sun Apr 04, 2021 10:47 am
by TPK
Mumbleypeg wrote: ↑Sat Apr 03, 2021 4:59 am
Fished this one out of the bay. Nice little 2-7/8 inch tip bolster whittler with a wedge separating the back springs. Curious that only the small pen blade has a half stop. Goins’ says the stamp was used until 1941.
Ken
Nice find Ken!

Congrats Buddy!

Re: Ulster Collecting
Posted: Sun Apr 04, 2021 5:10 pm
by RalphAlsip
I probably should not buy knives that I don't know anything about...

I'm a sucker for (what I think are) old knives in good condition.
Aside from the etching on the blade, there are no markings whatsoever on this knife. I (want to ) believe that this is an Ulster made knife. Do you think it was made by Ulster? Any thoughts on to whom the initials "AFB" might be referencing? I don't believe Albert Baer's middle initial was "F".
I would be grateful for any insight that can be provided.
Re: Ulster Collecting
Posted: Sun Apr 04, 2021 6:58 pm
by ScoutKnives
Beautiful knife , I have the same knife but etched craftsman on the master blade .
My guess would be ulster knife company as well .
Re: Ulster Collecting
Posted: Sun Apr 04, 2021 8:43 pm
by kootenay joe
I wonder if "A.F.B." might be the initials of the Sears buyer for the Craftsman line of knives ?
About 10 ? years ago Michael Little posted a lot of information in the B.F. Schrade forum about Craftsman knives and i think he names the Sears buyer. Sears was the most important, biggest customer that both Schrade & Ulster had.
Both the above knives are spectacular ! As a former Craftsman collector i am very drawn to this stag sleeveboard Whittler.
kj
Re: Ulster Collecting
Posted: Mon Apr 05, 2021 4:44 pm
by BWT
Ulster Knife Co. Pruner
Re: Ulster Collecting
Posted: Mon Apr 12, 2021 1:10 pm
by JohnR
Both of the whittlers are stunning and the pruner is very nice also, nice bone that shows years of honest use.
Picked up this utility knife that I found interesting in that it has a clip main and a Phillips screwdriver, it never had a bail and is a fairly compact package. I wonder if it was made with spare parts from the 10th Mountain Division knives or was it another version military issue knife.
Re: Ulster Collecting
Posted: Mon Apr 12, 2021 1:16 pm
by BWT
Good question John but I don’t have a clue, nice knife though!!
Re: Ulster Collecting
Posted: Mon Apr 12, 2021 3:13 pm
by doglegg
I have one just like it JohnR and that was my suspicion.

Re: Ulster Collecting
Posted: Mon Apr 12, 2021 4:05 pm
by danno50
Fantastic whittlers, Ralph and ScoutKnives.
Very nice old pruner, Bill.
Beautiful and interesting utility knife, John.

Re: Ulster Collecting
Posted: Mon Apr 12, 2021 4:24 pm
by BWT
Thanks Dan!
Re: Ulster Collecting
Posted: Mon Apr 19, 2021 7:26 pm
by New_Windsor_NY
Very recently, this became the latest pocket knife to join my collection. It is an ULSTER, single blade, 3 tool pocket knife. It joins my three STEVENSON 45's, a CAMILLUS 1949, a CAMILLUS 1957, two CAMILLUS 1958's, three CAMILLUS 1959's, a CAMILLUS 1960 and a SCHRADE 1982. All these MIL-K pattern pocket knives have been previously posted. It is in GOOD+ 'condition and it needed a little cleaning. I took some pictures and here it is.
Click on a picture to ENLARGE.
Re: Ulster Collecting
Posted: Wed Apr 21, 2021 11:36 am
by Meridian_Mike
Here is an interesting Ulster item I found yesterday.
I DIDN'T KNOW.......
There was a Prince Albert tobacco offer that only listed one knife choice.
This is the insert inside a PA can that didn't have the "knife offer" advertisement on the outside of the can......
back side of the can......
Maybe this was an early version of the knife offer before there was 3 offered??????
I thought it was interesting so I added it to my collection.

Re: Ulster Collecting
Posted: Wed Apr 21, 2021 12:22 pm
by Meridian_Mike
OK.....
Here is a snip from an article I found that was written by Dennis Ellingsen.
It appears that the knives were not all available at the same time......
The whittler is the 58 OT
The camp knife is the 114 OT
The Barlow is the 10 OT
SO..... the 58 OT was available first between 1961 and 1966.
Then the others came along in 1964.....
Maybe that is why the first inserts listed only one knife....

Re: Ulster Collecting
Posted: Wed Apr 21, 2021 2:55 pm
by edge213
Meridian_Mike wrote: ↑Wed Apr 21, 2021 12:22 pm
OK.....
Here is a snip from an article I found that was written by Dennis Ellingsen.
It appears that the knives were not all available at the same time......
x article.jpg
The whittler is the 58 OT
The camp knife is the 114 OT
The Barlow is the 10 OT
SO..... the 58 OT was available first between 1961 and 1966.
Then the others came along in 1964.....
Maybe that is why the first inserts listed only one knife....
Thanks a lot Mike.
All these years I've been ignoring the PA cans without the knife offer.
Now I will have to open all the plain ones just to see if there is a knife offer inside.

Re: Ulster Collecting
Posted: Wed Apr 21, 2021 3:20 pm
by Meridian_Mike
edge213 wrote: ↑Wed Apr 21, 2021 2:55 pm
Thanks a lot Mike.
All these years I've been ignoring the PA cans without the knife offer.
Now I will have to open all the plain ones just to see if there is a knife offer inside.
Me too....
We will have to start puttin' the "chicken eye" on those PA cans.....LOL

Re: Ulster Collecting
Posted: Sun May 09, 2021 1:21 pm
by toomanyknives
I've got to get a better tin...
Re: Ulster Collecting
Posted: Mon May 10, 2021 3:01 pm
by Meridian_Mike
toomanyknives wrote: ↑Sun May 09, 2021 1:21 pm
I've got to get a better tin...
They are out there!
I have seen some worse than yours but I have also seen some that look mint.
Shop around!

Re: Ulster Collecting
Posted: Mon May 10, 2021 3:36 pm
by toomanyknives
Meridian_Mike wrote: ↑Mon May 10, 2021 3:01 pm
toomanyknives wrote: ↑Sun May 09, 2021 1:21 pm
I've got to get a better tin...
They are out there!
I have seen some worse than yours but I have also seen some that look mint.
Shop around!
Yep. I've been cheap, Mike. I've passed on a few that were mint, but they wanted $30.00 plus for them. i just couldn't pull the trigger!

Re: Ulster Collecting
Posted: Mon May 10, 2021 11:05 pm
by stockman
I found a bunch of the cans in a junk store a few years back, most were like new. I sold and gifted all but two. There were no papers with the cans, the paper’s were harder for me to find. Keep looking a nice one will show up. $30 seems like a bunch to me for the can Harold
Re: Ulster Collecting
Posted: Tue May 11, 2021 2:35 am
by edge213
Prince Albert.
The two packs are still full of tobacco.
Re: Ulster Collecting
Posted: Tue May 11, 2021 3:02 am
by toomanyknives
edge213 wrote: ↑Tue May 11, 2021 2:35 am
Prince Albert.
The two packs are still full of tobacco.
Holy cow, David! Now I know where all the good tins are! Awesome collection!
Re: Ulster Collecting
Posted: Tue May 11, 2021 3:03 am
by toomanyknives
stockman wrote: ↑Mon May 10, 2021 11:05 pm
I found a bunch of the cans in a junk store a few years back, most were like new. I sold and gifted all but two. There were no papers with the cans, the paper’s were harder for me to find. Keep looking a nice one will show up. $30 seems like a bunch to me for the can Harold
Yes sir!
Re: Ulster Collecting
Posted: Tue May 11, 2021 1:24 pm
by edge213
toomanyknives wrote: ↑Tue May 11, 2021 3:02 am
edge213 wrote: ↑Tue May 11, 2021 2:35 am
Prince Albert.
The two packs are still full of tobacco.
Holy cow, David! Now I know where all the good tins are! Awesome collection!
Thank you sir.
Re: Ulster Collecting
Posted: Tue May 11, 2021 1:30 pm
by edge213
Does anyone have this one?
I've never seen one in person, only this picture.