Is your EDC a GEC?
- Tsar Bomba
- Posts: 3637
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: Is your EDC a GEC?
I'm inclined to say that, even in a year with as many big hits as 2018, the orange camel bone 43s might be the pinnacle of the GEC factory full runs. Mine needs a good polishing...





Everything's better with a Barlow
- J1890
- Posts: 457
- Joined: Tue Feb 09, 2016 9:45 am
- Location: Maine
Re: Is your EDC a GEC?
I agree with you there. What a great knife.Tsar Bomba wrote:I'm inclined to say that, even in a year with as many big hits as 2018, the orange camel bone 43s might be the pinnacle of the GEC factory full runs. Mine needs a good polishing...![]()
I also like the 66
"As for me and my house, we serve the Lord." Joshua 24:15
- KnifeSlinger#81
- Posts: 4171
- Joined: Tue Aug 11, 2015 8:50 pm
- Location: Oklahoma
- Contact:
Re: Is your EDC a GEC?
The 66 stockman is a winner. I have more than a few. 
-Paul T.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
-
Ivoryman
- Posts: 9551
- Joined: Tue Jun 02, 2015 4:20 am
- Location: Seattle, WA
Re: Is your EDC a GEC?
I also like the 66
855DCF24-F97E-4EBA-92B5-F7988216C0AB.jpeg[/quote]
Great shot, great knife, good background and great wine color in the bones J1890. Nice all around.
855DCF24-F97E-4EBA-92B5-F7988216C0AB.jpeg[/quote]
Great shot, great knife, good background and great wine color in the bones J1890. Nice all around.
"It's what people know about themselves inside that makes them afraid." -No Name, High Plains Drifter
- J1890
- Posts: 457
- Joined: Tue Feb 09, 2016 9:45 am
- Location: Maine
Re: Is your EDC a GEC?
Great shot, great knife, good background and great wine color in the bones J1890. Nice all around.[/quote]Ivoryman wrote:I also like the 66
855DCF24-F97E-4EBA-92B5-F7988216C0AB.jpeg
Thanks Iman! That blue bone is fantastic!
"As for me and my house, we serve the Lord." Joshua 24:15
- Tsar Bomba
- Posts: 3637
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
-
kootenay joe
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: Is your EDC a GEC?
Iman, what is the blue jack knife ? Tidioute 78 ? Northwoods ?? It is very attractive. I would like to find one.
kj
kj
-
kootenay joe
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: Is your EDC a GEC?
Last year Mark (sharpnshinyknives) kindly sold me one of his two Stag "Stockyard Whittler" #29 at his cost. I had been unable to land one in the 'scramble' so i was very pleased. As soon as i unwrapped the knife it spoke to me in a way no other GEC had. I did not want to put it away. I wanted to keep it with me so i began carrying it daily.
It soon became obvious what an excellent design this knife is. Three springs so really not a whittler, master is a clip blade which i think is the most useful of all blade profiles so excellent choice for a master blade. The problem with most multiblade knives is that the blade spines project high enough above the handle edges that when you need to grip firmly with one blade open, it can be uncomfortable enough to limit your grip strength. This Stockyard Whittler has an awl and sheepsfoot secondaries and both lie low, just a bit higher than the handle edges. With clip blade open i can squeeze the handle as hard as i am capable without any discomfort. Even the clip blade lies low enough that i can grip hard with either of the other 2 blades open.
Usually a sheepsfoot blade is deep, spine to edge, and thus 'sits high' when closed. But with the #29 the sheepsfoot has a narrow profile and so is not in the way.
I see an awl as very important in a folding knife. Notice how often you see a tipped clip blade ? That's because the knife does not have an awl. With an awl you can poke at things, even pry gently and save the tip of your clip.
This knife has very attractive stag and although it looks a bit thick, it feels great in hand and i don't even notice it in my pocket.
All these positive attributes i discovered after carrying & using it. I did not decide to carry it because of these features. Seems more like the knife picked me.
I expect this to be my EDC until my EOD. I hope there will be enough time to wear down the stag a little which i think will make it look even better.
Thanks Mark for sending me this knife.
kj
It soon became obvious what an excellent design this knife is. Three springs so really not a whittler, master is a clip blade which i think is the most useful of all blade profiles so excellent choice for a master blade. The problem with most multiblade knives is that the blade spines project high enough above the handle edges that when you need to grip firmly with one blade open, it can be uncomfortable enough to limit your grip strength. This Stockyard Whittler has an awl and sheepsfoot secondaries and both lie low, just a bit higher than the handle edges. With clip blade open i can squeeze the handle as hard as i am capable without any discomfort. Even the clip blade lies low enough that i can grip hard with either of the other 2 blades open.
Usually a sheepsfoot blade is deep, spine to edge, and thus 'sits high' when closed. But with the #29 the sheepsfoot has a narrow profile and so is not in the way.
I see an awl as very important in a folding knife. Notice how often you see a tipped clip blade ? That's because the knife does not have an awl. With an awl you can poke at things, even pry gently and save the tip of your clip.
This knife has very attractive stag and although it looks a bit thick, it feels great in hand and i don't even notice it in my pocket.
All these positive attributes i discovered after carrying & using it. I did not decide to carry it because of these features. Seems more like the knife picked me.
I expect this to be my EDC until my EOD. I hope there will be enough time to wear down the stag a little which i think will make it look even better.
Thanks Mark for sending me this knife.
kj
- FarSide
- Bronze Tier

- Posts: 416
- Joined: Thu Jun 02, 2016 8:13 pm
- Location: Central Valley of CA
Re: Is your EDC a GEC?
I have to agree with you a 100%. The #29 is great pattern. I was fortunate enough to pick up a really nice stag one with even thin covers. I often can't choose between my Osage or the stag. The stag usually wins
-Tim
- Sharpnshinyknives
- Gold Tier

- Posts: 6305
- Joined: Mon Jul 16, 2018 2:32 am
- Location: Indiana
- Contact:
Re: Is your EDC a GEC?
Roland, that is very kind of you. That’s some high praise for this knife. It is a very usable knife. You make some great points about why it’s so user friendly. That one does have some drop dead gorgeous stag on it too. Hope it continues to bring you joy for a lifetime.kootenay joe wrote: ↑Fri Feb 21, 2020 12:12 am Last year Mark (sharpnshinyknives) kindly sold me one of his two Stag "Stockyard Whittler" #29 at his cost. I had been unable to land one in the 'scramble' so i was very pleased. As soon as i unwrapped the knife it spoke to me in a way no other GEC had. I did not want to put it away. I wanted to keep it with me so i began carrying it daily.
It soon became obvious what an excellent design this knife is. Three springs so really not a whittler, master is a clip blade which i think is the most useful of all blade profiles so excellent choice for a master blade. The problem with most multiblade knives is that the blade spines project high enough above the handle edges that when you need to grip firmly with one blade open, it can be uncomfortable enough to limit your grip strength. This Stockyard Whittler has an awl and sheepsfoot secondaries and both lie low, just a bit higher than the handle edges. With clip blade open i can squeeze the handle as hard as i am capable without any discomfort. Even the clip blade lies low enough that i can grip hard with either of the other 2 blades open.
Usually a sheepsfoot blade is deep, spine to edge, and thus 'sits high' when closed. But with the #29 the sheepsfoot has a narrow profile and so is not in the way.
I see an awl as very important in a folding knife. Notice how often you see a tipped clip blade ? That's because the knife does not have an awl. With an awl you can poke at things, even pry gently and save the tip of your clip.
This knife has very attractive stag and although it looks a bit thick, it feels great in hand and i don't even notice it in my pocket.
All these positive attributes i discovered after carrying & using it. I did not decide to carry it because of these features. Seems more like the knife picked me.
I expect this to be my EDC until my EOD. I hope there will be enough time to wear down the stag a little which i think will make it look even better.
Thanks Mark for sending me this knife.
kj
SSk Mark
Visit my AAPK store here: https://www.allaboutpocketknives.com/sharpnshinyknives
Visit my AAPK store here: https://www.allaboutpocketknives.com/sharpnshinyknives
- Rotten
- Posts: 681
- Joined: Thu Jan 11, 2018 1:47 am
- Location: Texas panhandle
Re: Is your EDC a GEC?
Kuddos to Mark for letting you pick one up!kootenay joe wrote: ↑Fri Feb 21, 2020 12:12 am Last year Mark (sharpnshinyknives) kindly sold me one of his two Stag "Stockyard Whittler" #29 at his cost. I had been unable to land one in the 'scramble' so i was very pleased. As soon as i unwrapped the knife it spoke to me in a way no other GEC had. I did not want to put it away. I wanted to keep it with me so i began carrying it daily.
It soon became obvious what an excellent design this knife is. Three springs so really not a whittler, master is a clip blade which i think is the most useful of all blade profiles so excellent choice for a master blade. The problem with most multiblade knives is that the blade spines project high enough above the handle edges that when you need to grip firmly with one blade open, it can be uncomfortable enough to limit your grip strength. This Stockyard Whittler has an awl and sheepsfoot secondaries and both lie low, just a bit higher than the handle edges. With clip blade open i can squeeze the handle as hard as i am capable without any discomfort. Even the clip blade lies low enough that i can grip hard with either of the other 2 blades open.
Usually a sheepsfoot blade is deep, spine to edge, and thus 'sits high' when closed. But with the #29 the sheepsfoot has a narrow profile and so is not in the way.
I see an awl as very important in a folding knife. Notice how often you see a tipped clip blade ? That's because the knife does not have an awl. With an awl you can poke at things, even pry gently and save the tip of your clip.
This knife has very attractive stag and although it looks a bit thick, it feels great in hand and i don't even notice it in my pocket.
All these positive attributes i discovered after carrying & using it. I did not decide to carry it because of these features. Seems more like the knife picked me.
I expect this to be my EDC until my EOD. I hope there will be enough time to wear down the stag a little which i think will make it look even better.
Thanks Mark for sending me this knife.
kj
Roland, I could not agree with you more about the 29 pattern. It is an extremely comfortable knife to use and I find that I use all three blades on it more than I do any other of my three blade knives. I was able to get a nice stag in the GEC craziness but I usually carry my blood red version.
Trace
- FarSide
- Bronze Tier

- Posts: 416
- Joined: Thu Jun 02, 2016 8:13 pm
- Location: Central Valley of CA
- J1890
- Posts: 457
- Joined: Tue Feb 09, 2016 9:45 am
- Location: Maine
Re: Is your EDC a GEC?
Yup, the 26. Great little knife.
"As for me and my house, we serve the Lord." Joshua 24:15
-
kootenay joe
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: Is your EDC a GEC?
Best looking #26 i have seen !
kj
kj
- J1890
- Posts: 457
- Joined: Tue Feb 09, 2016 9:45 am
- Location: Maine
Re: Is your EDC a GEC?
Thanks KJ. I was fortunate enough to score it. Here’s the other side
"As for me and my house, we serve the Lord." Joshua 24:15
-
Gettingaboutthattime
- Posts: 20
- Joined: Fri May 01, 2020 5:44 am
- Location: Western Pa
Re: Is your EDC a GEC?
A few I enjoy using.
- edge213
- Gold Tier

- Posts: 8456
- Joined: Sat Jan 25, 2014 12:48 am
- Location: The Crossroads of America
Re: Is your EDC a GEC?
Great bunch of knives.Gettingaboutthattime wrote: ↑Mon May 25, 2020 11:02 am A few I enjoy using.
9CDADE26-C49C-4A5C-A7F6-15240E0BB1E6.jpeg
I love it when guys actually use GECs.
I use all mine, except for a couple.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
"Glowing like the metal on the edge of a knife" Meat Loaf
- FarSide
- Bronze Tier

- Posts: 416
- Joined: Thu Jun 02, 2016 8:13 pm
- Location: Central Valley of CA
- edge213
- Gold Tier

- Posts: 8456
- Joined: Sat Jan 25, 2014 12:48 am
- Location: The Crossroads of America
Re: Is your EDC a GEC?
Nice one farside
David
"Glowing like the metal on the edge of a knife" Meat Loaf
"Glowing like the metal on the edge of a knife" Meat Loaf
- FarSide
- Bronze Tier

- Posts: 416
- Joined: Thu Jun 02, 2016 8:13 pm
- Location: Central Valley of CA
Re: Is your EDC a GEC?
Thank you. I don’t know why I never really didn’t pay more attention to this pattern. Just didn’t click with the covers that came out this year. Fortunate to find this one.
-Tim
-
Ivoryman
- Posts: 9551
- Joined: Tue Jun 02, 2015 4:20 am
- Location: Seattle, WA
Re: Is your EDC a GEC?
one day:
one week:
one month:
one year:
"It's what people know about themselves inside that makes them afraid." -No Name, High Plains Drifter
- J1890
- Posts: 457
- Joined: Tue Feb 09, 2016 9:45 am
- Location: Maine
-
doglegg
- Gold Tier

- Posts: 23896
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
-
Ivoryman
- Posts: 9551
- Joined: Tue Jun 02, 2015 4:20 am
- Location: Seattle, WA
Re: Is your EDC a GEC?
"It's what people know about themselves inside that makes them afraid." -No Name, High Plains Drifter
-
doglegg
- Gold Tier

- Posts: 23896
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Is your EDC a GEC?
That's a lot to look at Iman. You have some wonderful pocket toters.
