KNIFE FINDS OF THE DAY

Just Plain Dave · Post by **Just Plain Dave** » Sun Jul 19, 2015 6:30 pm

I give really trashy looking knives a nice soak in mineral oil.
Can be a mess to clean up afterwards but oh well.

junebug · Post by **junebug** » Mon Jul 20, 2015 2:59 am

SWEET SWAP MEET SCORES , TREE

I SNAGGED THIS ONE LOCAL TODAY

old long discontinued model
SPYDERCO HARPY

(NOTE - slots in SS handle are for SHACKLES, was geared toward sail boat/boating use)

Jacknifeben · Post by **Jacknifeben** » Mon Jul 20, 2015 1:01 pm

found this over the week end, still etched.

tongueriver · Post by **tongueriver** » Mon Jul 20, 2015 5:14 pm

Jacknifeben wrote:found this over the week end, still etched.

Remington?

rexstubbins · Post by **rexstubbins** » Mon Jul 27, 2015 1:07 am

Lovin that Remmy JackKnifeBen.

Found this one at an antique store today. Yeah it's celluloid but had to pick it up for the price. 4 line Camillus Anglo Saxon whittler. Does anyone know if this is a prototype? Marked with 150 on the back of the main blade. I suspect the handle material was prototype as I have seen pearl handle models of this pattern.

FRJ · Post by **FRJ** » Mon Jul 27, 2015 1:11 am

That's a real beauty for so many reasons.
I like those handles.

singin46 · Post by **singin46** » Mon Jul 27, 2015 4:59 am

Wow that is an old Camillus beauty! Wish it was in my collection!

carrmillus · Post by **carrmillus** » Mon Jul 27, 2015 12:11 pm

.........I have never seen one like this!!!...if it's about 3 3/8" closed, I have one similar, only mine has a clip primary and 2 pen blades, no nail file, w/bone handles, same shield!!.........how is it marked???........that's a winner!!!.......

................

PigSticker · Post by **PigSticker** » Mon Jul 27, 2015 12:27 pm

Wow you can bet there ain't many like that laying around that is a beautiful knife!

ScoutKnives · Post by **ScoutKnives** » Mon Jul 27, 2015 1:08 pm

Very nice knife !
1.50 possibly the price when sold new ?

rexstubbins wrote:Lovin that Remmy JackKnifeBen.

Found this one at an antique store today. Yeah it's celluloid but had to pick it up for the price. 4 line Camillus Anglo Saxon whittler. Does anyone know if this is a prototype? Marked with 150 on the back of the main blade. I suspect the handle material was prototype as I have seen pearl handle models of this pattern.

glennbad · Post by **glennbad** » Mon Jul 27, 2015 1:13 pm

Wow, that knife is stunning Rex! I would have popped on the cell also, regardless.

Colonel26 · Post by **Colonel26** » Mon Jul 27, 2015 3:21 pm

That's a right nice Camillus. It's the first I've seen with a blade etch like that. I'd probably have ripped my back pocket off in whipping my billfold out to buy that thing!

rexstubbins · Post by **rexstubbins** » Tue Jul 28, 2015 1:53 am

Yeah I got a steel on the whittler. It was in a cigar box along with some other lesser quality knives.

Carmillus - It is 3-3/8" closed. Marked:

CAMILLUS
CUTLERY CO.
CAMILLUS N.Y.
U.S.A.

After doing a little research I found one on J. Bruce Voyles site but it's pearl handled:

http://www.jbrucevoyles.com/A73/DSCN0594.JPG

stockman · Post by **stockman** » Tue Jul 28, 2015 2:09 am

Rex Beautiful knife!

Harold

TripleF · Post by **TripleF** » Wed Jul 29, 2015 5:38 pm

Mostly kitchen knives today.
The set is a Robeson Gourmet Carver selh sharpening system....

FRJ · Post by **FRJ** » Wed Jul 29, 2015 9:59 pm

WOW!
Scott, that carving set is right out of the Jetsons.

Off to the left; those four paring knives, second one down, probably the best knife of them all.
Nice score!

TripleF · Post by **TripleF** » Thu Jul 30, 2015 5:46 am

Thanks Joe

We'll see if the ebayer's agree!

Here's a close-up of that German made paring knife for ya..

junebug · Post by **junebug** » Thu Jul 30, 2015 5:56 am

nice snags, scott......

jmh58 · Post by **jmh58** » Thu Jul 30, 2015 12:06 pm

Scott.. That paring knife is "KOOL"!!

John

TripleF · Post by **TripleF** » Thu Jul 30, 2015 12:18 pm

Thanks fellas!

We'll see what she brings on ebay.

TripleF · Post by **TripleF** » Fri Jul 31, 2015 4:49 pm

Scored a couple of cool finds today.....

philco · Post by **philco** » Fri Jul 31, 2015 10:26 pm

TripleF wrote:Scored a couple of cool finds today.....

Yes you did.

I've never seen an Anvil fixed blade before, much less one in the box. I also like that plier, adjustable wrench combo. That whole lot appeals to the knife junkie in me.

Just Plain Dave · Post by **Just Plain Dave** » Sat Aug 01, 2015 1:35 am

I must agree. I have never seen quite that combination of pliers and adjustable wrench.

junebug · Post by **junebug** » Sat Aug 01, 2015 2:11 am

VERY NICE PILE, SCOTT

FOUND THIS ON THE COMBO TOOL :
The tool consists of a pair of slip-joint pliers with cutters, an adjustable Crescent style wrench on one handle, and a screwdriver on the other handle. Per some internet research it appears that this tool was sold as a set with the Kabar marine Mate Knife. Also, based on it's characteristics I suspect that it was made the Diamond Tool Company since it resembles their No. DH16 HandyBoy tool (also HandyMan model ).

TripleF · Post by **TripleF** » Sat Aug 01, 2015 2:44 am

That's what it is Josh.....just ain't no numberts to go weith it...and it is clearly spelled HANDIMAN.....a true rare item.

All About Pocket Knives

KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY