Mail Call !-Post your new pick-ups here............

[Papa Bones]

I've cut through 2-2 1/2" branches with the saw on mine. I have the German Army, Swiss Army, Fireman, Outrider, and Dual Pro X; as well as an older Alpineer I converted to a slipjoint by replacing the scales and removing the lock. All of those but the Alpineer have a saw, and they work great.

The belt cutter blade found on models like the Fireman and Dual Pro tend to make short work of a lot of vines.

Besides the Wisteria vines, I also cut back some branches on a Crepe Myrtle Bush. The biggest was only about the size of my thumb. But the saw worked great. But yes, I was also looking at the Green Handle Bundeswehr knife. I may wind up getting it just because I like it.

[Papa Bones]

Very practical little user you have there Smitty. That baby has a blade for all occasions. Those pesky vines don't stand a chance! P.S.-Would ya come and mow my lawn when you're done at your daughter's? LOL!

Thanks Marc. It worked great. A Handy size for a utility knife.

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick.

Three winners right there. The A.G. Russel 1-Hander is a looker.

[Papa Bones]

Really sweet knives all around guys!!

Pulled this Fallkniven LTC out of the mailbox today.. simple, super sharp, super tight and alligator snap...I'm going to make this my edc for a month or so and see how this 3g powder steel holds up...

Bet it will be a good-un!!

[Madmarco]

Really sweet knives all around guys!!

Pulled this Fallkniven LTC out of the mailbox today.. simple, super sharp, super tight and alligator snap...I'm going to make this my edc for a month or so and see how this 3g powder steel holds up...

Beautiful knife Ryan! And you can't go wrong with that brand!

[Madmarco]

Very practical little user you have there Smitty. That baby has a blade for all occasions. Those pesky vines don't stand a chance! P.S.-Would ya come and mow my lawn when you're done at your daughter's? LOL!

Thanks Marc. It worked great. A Handy size for a utility knife.

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick.

Three winners right there. The A.G. Russel 1-Hander is a looker.

Thanks Smitty!

[Papa Bones]

Got a couple in today.

First, a rather unique Camillus 72Y Carpenters Whittler. Not only is it like new in the box with the original wrapper and pamphlet, but the pile side of the master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch. I will also post this in the Camillus 72 thread.

I also received this piece of Queen ephemera. A Queen Steel #22 Barlow Box that has the display surface with backboard. It is like new, with hardly any rubs. The diecut straps on the box have not been unfolded. I also included a photo of it with my Queen Steel #22 Barlow with it, but I did not unfold the straps.

[jerryd6818]

master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch.

Yepper. There's a few of 'em floating around out there. Got this one in January of 2017.

[edge213]

Got a couple in today.

First, a rather unique Camillus 72Y Carpenters Whittler. Not only is it like new in the box with the original wrapper and pamphlet, but the pile side of the master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch. I will also post this in the Camillus 72 thread.
Camillus 72Y_22LR6_a.png
Camillus 72Y_22LR6_b.png
Camillus 72Y_22LR6_c.png
Camillus 72Y_22LR6_d.png

I also received this piece of Queen ephemera. A Queen Steel #22 Barlow Box that has the display surface with backboard. It is like new, with hardly any rubs. The diecut straps on the box have not been unfolded. I also included a photo of it with my Queen Steel #22 Barlow with it, but I did not unfold the straps.
Queen Steel 22 Barlow Box_a.png
Queen Steel 22 Barlow Box_b.png
Queen Steel Barlow Box_c.png

The barlow display is really cool.

[Papa Bones]

The barlow display is really cool.

Thanks David

[Papa Bones]

master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch.

Yepper. There's a few of 'em floating around out there. Got this one in January of 2017.

[Sharpnshinyknives]

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick. 8)WIN_20210407_12_24_59_Pro.jpgWIN_20210407_12_24_29_Pro.jpgWIN_20210407_12_25_26_Pro.jpg

Three beauties Mark! All very nice, especially the Mcusta.

Smitty that yellow whittler is a sharp looking knife. I like the Barlow display with a Barlow on it.

Stan be sure to let us know how that Fallkniven holds up. The steel sounds superb. I have some Japanese knives made from powdered steel but have never used them.

[Stanwade]

Very practical little user you have there Smitty. That baby has a blade for all occasions. Those pesky vines don't stand a chance! P.S.-Would ya come and mow my lawn when you're done at your daughter's? LOL!

Thanks Marc. It worked great. A Handy size for a utility knife.

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick.

Three winners right there. The A.G. Russel 1-Hander is a looker.

I hope so, Smitty,.. thanks!

[Stanwade]

Really sweet knives all around guys!!

Pulled this Fallkniven LTC out of the mailbox today.. simple, super sharp, super tight and alligator snap...I'm going to make this my edc for a month or so and see how this 3g powder steel holds up...

Beautiful knife Ryan! And you can't go wrong with that brand!

Thanks Mark!

[Stanwade]

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick. 8)WIN_20210407_12_24_59_Pro.jpgWIN_20210407_12_24_29_Pro.jpgWIN_20210407_12_25_26_Pro.jpg

Beautiful knives mark!

[Stanwade]

Got a couple in today.

First, a rather unique Camillus 72Y Carpenters Whittler. Not only is it like new in the box with the original wrapper and pamphlet, but the pile side of the master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch. I will also post this in the Camillus 72 thread.
Camillus 72Y_22LR6_a.png
Camillus 72Y_22LR6_b.png
Camillus 72Y_22LR6_c.png
Camillus 72Y_22LR6_d.png

I also received this piece of Queen ephemera. A Queen Steel #22 Barlow Box that has the display surface with backboard. It is like new, with hardly any rubs. The diecut straps on the box have not been unfolded. I also included a photo of it with my Queen Steel #22 Barlow with it, but I did not unfold the straps.
Queen Steel 22 Barlow Box_a.png
Queen Steel 22 Barlow Box_b.png
Queen Steel Barlow Box_c.png

I love em' Smitty! Love that box...

[Stanwade]

I got this one in Yesterday. I wanted a knife to carry in my Mower Seat Bag when cutting my daughters yard. She has a bunch of Wisteria Vines in her back yard, some rather large. Hence I wanted to try out this mini saw, and a larger knife blade. So I thought I would give this Victorinox Forester a try. It is approximately 4-3/8" closed, it has a 3-1/2" spear point blade with liner-lock, a 3-5/8" saw blade, of course the usual can opener / small flat tip, a large flat tip / cap opener with liner lock, Cork Screw, awl / punch, toothpick and tweezers. Plus all blades have half stops. Will give it a try later this morning when I start cutting grass.

Victorianox Forester.JPG

Love this one, too..

[Ripster]

master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch.

Yepper. There's a few of 'em floating around out there. Got this one in January of 2017.

Nice Yello Jackets Smitty and Jerry
And Smitty that Barlow with your new Display is pretty cool .
Mail call has been busy lately, some pretty nice stuff by everyone !

[Dan In MI]

I, too, like the Yellow Jackets.

My new arrival for today was a Case Sod Buster Jr. with crimson peach seed jigged bone covers. Am I becoming a "bonehead" and/or spending a little too much money on my new hobby?

I also made an unboxing video. Until I can figure out that darned embed feature, the link will have to do.

https://youtu.be/oLrDVKcaDFo

[Papa Bones]

Love this one, too..

Thanks Ryan

Nice Yello Jackets Smitty and Jerry
And Smitty that Barlow with your new Display is pretty cool .
Mail call has been busy lately, some pretty nice stuff by everyone !

Thanks JP. I agree, a lot of people coming up with some very nice knives lately!

[Papa Bones]

I, too, like the Yellow Jackets.

My new arrival for today was a Case Sod Buster Jr. with crimson peach seed jigged bone covers. Am I becoming a "bonehead" and/or spending a little too much money on my new hobby?

Appreciate it Dan. Good looking Sodbuster Jr. Those are a good size and a good EDC!

[Dan In MI]

Thanks, Papa Bones. You now have me thinking of adding a Sod Buster Jr. as a carrier (in addition to a Copperlock).

[jerryd6818]

I carried a Case Sodbuster for a while back in the mid-70's. I never really bonded with it.

[Madmarco]

Got a couple in today.

First, a rather unique Camillus 72Y Carpenters Whittler. Not only is it like new in the box with the original wrapper and pamphlet, but the pile side of the master clip blade has the 1997 22LR6 tang stamp while the front of the blade has the Double Line Camillus Tang Stamp and the Yellow Jacket blade etch. I will also post this in the Camillus 72 thread.
Camillus 72Y_22LR6_a.png
Camillus 72Y_22LR6_b.png
Camillus 72Y_22LR6_c.png
Camillus 72Y_22LR6_d.png

I also received this piece of Queen ephemera. A Queen Steel #22 Barlow Box that has the display surface with backboard. It is like new, with hardly any rubs. The diecut straps on the box have not been unfolded. I also included a photo of it with my Queen Steel #22 Barlow with it, but I did not unfold the straps.
Queen Steel 22 Barlow Box_a.png
Queen Steel 22 Barlow Box_b.png
Queen Steel Barlow Box_c.png

A couple of beauties there Smitty! I'm really diggn' the Barlow, and the display is super-cool too!

[Madmarco]

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick. 8)WIN_20210407_12_24_59_Pro.jpgWIN_20210407_12_24_29_Pro.jpgWIN_20210407_12_25_26_Pro.jpg

Three beauties Mark! All very nice, especially the Mcusta.
Thanks for makin' it all possible Mark!
Smitty that yellow whittler is a sharp looking knife. I like the Barlow display with a Barlow on it.

Stan be sure to let us know how that Fallkniven holds up. The steel sounds superb. I have some Japanese knives made from powdered steel but have never used them.

[Madmarco]

I found these 3 in my mailbox this morning! A blue n' gold Mcusta, an A.G. Russell 1-hand'er, and an A.G. Russell Texas Ranger toothpick. 8)WIN_20210407_12_24_59_Pro.jpgWIN_20210407_12_24_29_Pro.jpgWIN_20210407_12_25_26_Pro.jpg

Beautiful knives mark!

Thanks Ryan!