Now we have a Colonial thread,Show'em
-
PigSticker
- Posts: 1296
- Joined: Thu Jun 24, 2010 3:37 pm
- Location: Burton,Michigan
Re: Now we have a Colonial thread,Show'em
Wowwee!! those are some beautiful knives Robert--
NEVER DOUBT YOUR DAWG
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Mr.Rick comes up with a classic of the "shell" type of jack knife that were produced by the thousands weekly by Colonial and many other companies for numerous years...this one 70's
One things for sure...they took a beating for years in someone's pocket, tackle box, tool shed, etc. This Colonial, cat # 492w was a good knife for a few bucks back then. We also had the # 493, three blade in yellow, white, black and others.
It's good to see that it ended up with a collector who appreciate it's value and history. Many of us here at AAPK are here to do just that!
Nice score pal...
Thank you Scott..perfect fit and finish is difficult to achieve and these are some of my best..lotttsssa' hours on each of them, and all, one of a kind!! Mr. Sam Colt watches over these babe's..Bobby P..
One things for sure...they took a beating for years in someone's pocket, tackle box, tool shed, etc. This Colonial, cat # 492w was a good knife for a few bucks back then. We also had the # 493, three blade in yellow, white, black and others.
It's good to see that it ended up with a collector who appreciate it's value and history. Many of us here at AAPK are here to do just that!
Nice score pal...
Thank you Scott..perfect fit and finish is difficult to achieve and these are some of my best..lotttsssa' hours on each of them, and all, one of a kind!! Mr. Sam Colt watches over these babe's..Bobby P..
- Mr Rick
- Posts: 794
- Joined: Tue Apr 02, 2013 9:51 pm
- Location: So Cal
- Contact:
Re: Now we have a Colonial thread,Show'em
Thanks for the information Bob. Always nice to know a bit about my knives. 
Rick
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
- Cutty
- Posts: 3031
- Joined: Sat Feb 18, 2012 3:15 pm
- Location: N. Georgia
Re: Now we have a Colonial thread,Show'em
Nice colonial Rick!
I have one that had loose shell covers. So I replaced them with worm grooved bone scales. Solid knives with really good steel IMO.
I have one that had loose shell covers. So I replaced them with worm grooved bone scales. Solid knives with really good steel IMO.
I dig half stops!!
"GOTTA DO WHATCHA GOTTA DO, SO THAT YOU GET TO DO, WHATCHA WANNA DO"
My Grandad.
God rest his soul.
Brian
"GOTTA DO WHATCHA GOTTA DO, SO THAT YOU GET TO DO, WHATCHA WANNA DO"
My Grandad.
God rest his soul.
Brian
- garddogg56
- Bronze Tier

- Posts: 9872
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: Now we have a Colonial thread,Show'em
Just picked up this Forest-Master for my son to keep in his glove box what a sweety.
"On the Road Again"Willie Nelson
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Pretty and rare!
- garddogg56
- Bronze Tier

- Posts: 9872
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: Now we have a Colonial thread,Show'em
Bob;I know she cleaned up well afta the pic, but what makes her rare??Up here in Maine Colonial camp and work knives were VERY popular.
"On the Road Again"Willie Nelson
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Hello garddogg56....
I say rare because most of our Scout knives at that time had either black or brown imitation stag plastic handles and this one has three blades.
Am I to assume there is no belt punch?? or did you not open it or it broke off..??
This tells me that they made this style with two springs and rather than use a double ended spring to support a secondary blade across from the pocket blade, we just used a butt spring and made it with one master blade...very strange!! But since your showing it, it does exist!!
A three blade, white handled Scout knife probably made in the 50's, is very rare !!
Nice score, congrats....Bobby P.

I say rare because most of our Scout knives at that time had either black or brown imitation stag plastic handles and this one has three blades.
Am I to assume there is no belt punch?? or did you not open it or it broke off..??
This tells me that they made this style with two springs and rather than use a double ended spring to support a secondary blade across from the pocket blade, we just used a butt spring and made it with one master blade...very strange!! But since your showing it, it does exist!!
A three blade, white handled Scout knife probably made in the 50's, is very rare !!
Nice score, congrats....Bobby P.
- garddogg56
- Bronze Tier

- Posts: 9872
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: Now we have a Colonial thread,Show'em
Thanx Bobby
There isn't a belt punch and she has two springs.
"On the Road Again"Willie Nelson
- vikingdog
- Posts: 2308
- Joined: Mon Feb 08, 2010 2:46 am
- Location: Pennsylvania The Keystone State
Re: Now we have a Colonial thread,Show'em
Here are my Colonials. I never paid much attention to them until a year or two ago, now I look for them. They are great users and the steel is easy to sharpen, they really take an edge. These all feel good in the hand and pocket and have strong snap.
"Progress might have been all right once, but it has gone on too long." Ogden Nash
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
- garddogg56
- Bronze Tier

- Posts: 9872
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Very nice vikingdog! It amazes me to such old, well used knives from my company and they are still around!! That was the theme behind the whole Colonial Empire..
Inexpensive, strong and well built!! The fact that these baby's are still around proves it!
Thank you for showing them sir...
Bobby P. CKCo...
Inexpensive, strong and well built!! The fact that these baby's are still around proves it!
Thank you for showing them sir...
Bobby P. CKCo...
- Mr Rick
- Posts: 794
- Joined: Tue Apr 02, 2013 9:51 pm
- Location: So Cal
- Contact:
Re: Now we have a Colonial thread,Show'em
Rick
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
- Just Plain Dave
- Bronze Tier

- Posts: 7724
- Joined: Sat Sep 05, 2009 3:54 am
- Location: Near East Texas (Cleveland area)
Re: Now we have a Colonial thread,Show'em
Where is the like button! Them are sweet!
Looking for the magic penny!
- TripleF
- Gold Tier

- Posts: 19597
- Joined: Mon Feb 14, 2011 3:42 pm
- Location: West Central FL
- Contact:
Re: Now we have a Colonial thread,Show'em
A while back Bonfirebob, bombed me this multi-function Swiss Army style knife. I took some pics today and had to share.....
Hopefully Mr. Paolantonio will be along to add some more insights on this knife. As I recall he said there were only a couple made with these brown handles, and I've yet to see one with red handles or not, that had a saw blade.....
*EDIT* - Bobby did comment on this knife on the first page of this thread.....stating it was a custom #2008. Hopefully you'll forgive me for posting more pics of the same knife.....
Hopefully Mr. Paolantonio will be along to add some more insights on this knife. As I recall he said there were only a couple made with these brown handles, and I've yet to see one with red handles or not, that had a saw blade.....
*EDIT* - Bobby did comment on this knife on the first page of this thread.....stating it was a custom #2008. Hopefully you'll forgive me for posting more pics of the same knife.....
SCOTT
https://www.allaboutpocketknives.com/catalog/triplef
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Blog: https://scottrauberoutdoors.wordpress.c ... e-26-2026/
https://www.allaboutpocketknives.com/catalog/triplef
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Blog: https://scottrauberoutdoors.wordpress.c ... e-26-2026/
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Well Mr. rick, that's a nice pair you've got there!! That old swirl Celluloid is always pretty!!
Hey Scott, don't appologise for showing this classic again...
It was a special order, private label, and I'd be shocked if somebody else has one of these kicking around!!
A special gift for a very special friend...that's how I roll!!
Bobby P. CKCo....
Hey Scott, don't appologise for showing this classic again...
It was a special order, private label, and I'd be shocked if somebody else has one of these kicking around!!
A special gift for a very special friend...that's how I roll!!
Bobby P. CKCo....
- vikingdog
- Posts: 2308
- Joined: Mon Feb 08, 2010 2:46 am
- Location: Pennsylvania The Keystone State
Re: Now we have a Colonial thread,Show'em
Hi Bobby, these are the kind of knives I like to carry.Bonfire bob wrote:Very nice vikingdog! It amazes me to such old, well used knives from my company and they are still around!! That was the theme behind the whole Colonial Empire..
Inexpensive, strong and well built!! The fact that these baby's are still around proves it!
Thank you for showing them sir...
Bobby P. CKCo...
"Progress might have been all right once, but it has gone on too long." Ogden Nash
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Excellent Mike!!
You have officially become a "Colonial Knife true collector"...bitten by the bug, so to speak.
You certainly have become a member.THE THING IS, Colonial made millions of knives, of so many kinds and styles for 70 + years! Because these knives were ALL built pretty tuff!
Considering the fact that the three original owner's like grandpa', were all terribly critical about quality and check the production every day. What I'm getting at is there are still tons of Colonial's out there, in circulation or not. That's why they are nice to collect in yard sales, flea markets and such...
Mike, I applaud your enthusiasm to knife collecting of all kinds; it's a great hobby.
B.P. CKCo..

You have officially become a "Colonial Knife true collector"...bitten by the bug, so to speak.
You certainly have become a member.THE THING IS, Colonial made millions of knives, of so many kinds and styles for 70 + years! Because these knives were ALL built pretty tuff!
Considering the fact that the three original owner's like grandpa', were all terribly critical about quality and check the production every day. What I'm getting at is there are still tons of Colonial's out there, in circulation or not. That's why they are nice to collect in yard sales, flea markets and such...
Mike, I applaud your enthusiasm to knife collecting of all kinds; it's a great hobby.
B.P. CKCo..
- Lawrence
- Posts: 512
- Joined: Thu Nov 29, 2012 6:53 pm
- Location: Ontario, Canada
Re: Now we have a Colonial thread,Show'em
Some sweet Colonials I recently added to my collection...
-
Yankee John
- Posts: 27
- Joined: Fri Apr 26, 2013 9:15 pm
Re: Now we have a Colonial thread,Show'em
I picked up these two last week- They are the 1st Colonial's in my collection.
The Barlow is identical to the one Lawrence just posted above. It feels a bit more 'solid' than the Imperial Barlows that I own, for some reason.
John
The Barlow is identical to the one Lawrence just posted above. It feels a bit more 'solid' than the Imperial Barlows that I own, for some reason.
John
- vikingdog
- Posts: 2308
- Joined: Mon Feb 08, 2010 2:46 am
- Location: Pennsylvania The Keystone State
Re: Now we have a Colonial thread,Show'em
Thank you! I look forward to finding more and posting them right here.Bonfire bob wrote:Excellent Mike!!
You have officially become a "Colonial Knife true collector"...bitten by the bug, so to speak.
You certainly have become a member.
"Progress might have been all right once, but it has gone on too long." Ogden Nash
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/
Mike
- Lawrence
- Posts: 512
- Joined: Thu Nov 29, 2012 6:53 pm
- Location: Ontario, Canada
Re: Now we have a Colonial thread,Show'em
I agree Yankee John...nice solid handles, that's for sure. My Imperial Barlow has hollow handles.Yankee John wrote:I picked up these two last week- They are the 1st Colonial's in my collection.
The Barlow is identical to the one Lawrence just posted above. It feels a bit more 'solid' than the Imperial Barlows that I own, for some reason.
John
cheers
- Mr Rick
- Posts: 794
- Joined: Tue Apr 02, 2013 9:51 pm
- Location: So Cal
- Contact:
Re: Now we have a Colonial thread,Show'em
Rick
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
-
Bonfire bob
- Posts: 527
- Joined: Mon Aug 13, 2012 4:10 pm
Re: Now we have a Colonial thread,Show'em
Good afternoon gents and HAPPY FATHERS DAY to all!!
My friend Lawrence shows one of his new Colonial toys which is our infamous # 701, stainless fruit knives. This model, and it's small brother the # 601, were offered in a serrated or straight edge. I elaborate much more on our wet serrated grinder in my book.
The imprint was our favorite style of advertising, "hot die stamp". This proceedure was applied with foil colored paper and a "hot die" air opperated press. Through sheer repetition, I became quite good at this.
Dole Pineapple and Banana bought tons of these for many years. The orriginal ones had N.S. bolster's with solid pin construction!
The second hero is our ole' # 292 Barlow! The original's had plastic brown jigged handles and some were shell covers with hollow steel bolster/shell handles. The one that you own and many others were made with brass or nickle plated bolster's and you can see the worn plating here and the casted material is exposed..This knife was carried by someone for years and kept cutting!! I personally love to see these pics and wonder, who, what, when, where and so on...Fascinating!!
The third two blade little baby was a solid shell knife with space made for a Celluliod insert, and would be slated for surface ink imprint for most applications,
especially made for advertiseing..I forget the stock number..
Last one is our Electrician knife, and this one is the # 2901, single blade. The 2902 has the wire stripper/screwdriver blade also and the # 2903 adds one more blade, the hooked Lenolium blade.
Now my fingers are tired!! Thanks for the pics pal!!
And finally John has an old N.S. bolster key chain knife and another nice Barlow # 292..
When I get a minute, I'll show pics of all these I might have..
Thank you very much gents, and that little NS bolster one John is the oldest! About late 40's with solid pin construction..

My friend Lawrence shows one of his new Colonial toys which is our infamous # 701, stainless fruit knives. This model, and it's small brother the # 601, were offered in a serrated or straight edge. I elaborate much more on our wet serrated grinder in my book.
The imprint was our favorite style of advertising, "hot die stamp". This proceedure was applied with foil colored paper and a "hot die" air opperated press. Through sheer repetition, I became quite good at this.
Dole Pineapple and Banana bought tons of these for many years. The orriginal ones had N.S. bolster's with solid pin construction!
The second hero is our ole' # 292 Barlow! The original's had plastic brown jigged handles and some were shell covers with hollow steel bolster/shell handles. The one that you own and many others were made with brass or nickle plated bolster's and you can see the worn plating here and the casted material is exposed..This knife was carried by someone for years and kept cutting!! I personally love to see these pics and wonder, who, what, when, where and so on...Fascinating!!
The third two blade little baby was a solid shell knife with space made for a Celluliod insert, and would be slated for surface ink imprint for most applications,
especially made for advertiseing..I forget the stock number..
Last one is our Electrician knife, and this one is the # 2901, single blade. The 2902 has the wire stripper/screwdriver blade also and the # 2903 adds one more blade, the hooked Lenolium blade.
Now my fingers are tired!! Thanks for the pics pal!!
And finally John has an old N.S. bolster key chain knife and another nice Barlow # 292..
When I get a minute, I'll show pics of all these I might have..
Thank you very much gents, and that little NS bolster one John is the oldest! About late 40's with solid pin construction..
-
Yankee John
- Posts: 27
- Joined: Fri Apr 26, 2013 9:15 pm
Re: Now we have a Colonial thread,Show'em
I was looking over my collection today, and I forgot that this one was a Colonial too! I picked it up in a small lot of knives from an antique store about a month ago.
It's kinda minty too
John
It's kinda minty too
John

