Page 2 of 9

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 1:49 pm
by Lansky1
QTCut5 wrote: Tue Nov 25, 2025 1:42 pm
Lansky1 wrote: Tue Nov 25, 2025 1:10 pm My favorite aspect of the slimline trapper is the snap - the Case versions have consistently hard walk and talk ...
Nice Slimline family group, John, I especially like the barehead versions ::tu::
(why haven't those been posted here yet: https://www.allaboutpocketknives.com/kn ... start=1325 ::shrug:: )

Speaking of Slim Trappers with hard W&T snap....this Robeson by Queen RCSB has the hardest snap of any I have ever owned
That Robeson is a beauty Q ! Frame looks a bit longer than the Case ? I don't know what it is about the super hard W&T on the slimline's ... must have something to do with a long spring and relatively lightweight blade ::shrug::

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 2:16 pm
by tvic
Beautiful set, John!
And another good looking Slimline, Q.
Since we’re doing Slimlines, I think this is the only one I have, although I do like the pattern. Love the name - Ruby Stardust.

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 3:44 pm
by ThatWeirdKnifeGuy
First trapper I should post for Trapper Tuesday is this Parker-Frost Next Generation with blue bones. When I let one of my boys pick my carry for the day, they pick this one 80% of the time.

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 4:38 pm
by doglegg
Lansky1 wrote: Tue Nov 25, 2025 1:10 pm My favorite aspect of the slimline trapper is the snap - the Case versions have consistently hard walk and talk ...

trappers.jpg
A perfect 10 John.

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 5:00 pm
by Lansky1
thanks & some beauties there as well - love that red sparkle & blue is always ::woot:: (I'm really liking Parkers lately - been picking up a few, mostly the smaller MIJ lock blades - usually require some tuning, but it's worth it) ::tu::

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 5:05 pm
by 3030remchesterCOLO
I will post a few this week. First is a CASE XX stag scaled trapper that someone carried for so long that the stag is a smooth as glass with no bumps or ridges. Would love to have all the pocket change that wore this stag smooth. It is even wearing away at the edges. Whoever put this look on it, it is obvious that he cared for it. The second old worn trapper is my only Remington H-T-T. Poor condition but it wont leave my collection.

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 5:09 pm
by treefarmer
This was probably the 1st stainless steel knife I ever owned. Back then I had no idea how to keep an edge on it, near about wore the clip blade down trying to keep it sharp. I was even relieved when I had to put it away because of the broken pin. That started my affair with Schrade Walden knives as the local feed store sold them, carbon steel blades that I could sharpen. ::nod:: Fast forward to my discovery of AAPK, there I learned the old Case 6254 10 dot could be repaired..Thanks to member Bob Picklesimer aka Elvis, the old trapper was repaired by Case. When the knife was returned to me, the 10 dots were hidden due to whatever Case did when they repaired it. ::shrug:: The blade was cleaned up and sharpened properly but repositioned..
Paying closer attention to the knife, thanks to AAPK, I discovered the spring that operates the spay blade was carbon steel, not an issue but a bit different, maybe a Friday afternoon 5pm job or an early Monday morning job.
It's an old friend, been with me 55 years, doesn't get much pocket time and it probably deserves the rest after being abused by a feller that back then saw it only as a tool.
1970 10 dot 6254 Stainless steel
1970 10 dot 6254 Stainless steel
Note the dark colored spring
Note the dark colored spring
Treefarmer

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 11:14 pm
by Dinadan
Very interesting knives posted here. I especially like the older Trappers. I do not have a single Trapper in my accumulation, so I am really feasting my eyes on the ones posted here.

Re: It’s Trapper Tuesday

Posted: Tue Nov 25, 2025 11:18 pm
by knife7knut
Dug this one out of my parts box. Thought one of the back springs was broken but it was a worn tang. Think l will try & revive it for an edc. Not sure what the covers will be yet.

Re: It’s Trapper Tuesday

Posted: Wed Nov 26, 2025 1:52 am
by QTCut5
tvic wrote: Tue Nov 25, 2025 2:16 pm Ruby Stardust.
Beautiful knife, Tim, and great pic....that sparkly Slimline makes a pretty cool Christmas tree ornament ::nod::

Re: It’s Trapper Tuesday

Posted: Wed Nov 26, 2025 10:45 pm
by tvic
QTCut5 wrote: Wed Nov 26, 2025 1:52 am
tvic wrote: Tue Nov 25, 2025 2:16 pm Ruby Stardust.
Beautiful knife, Tim, and great pic....that sparkly Slimline makes a pretty cool Christmas tree ornament ::nod::
:lol: :lol: :lol: Sure would!

Re: It’s Trapper Tuesday

Posted: Thu Nov 27, 2025 12:32 am
by ThatWeirdKnifeGuy
treefarmer wrote: Tue Nov 25, 2025 5:09 pm This was probably the 1st stainless steel knife I ever owned. Back then I had no idea how to keep an edge on it, near about wore the clip blade down trying to keep it sharp. I was even relieved when I had to put it away because of the broken pin. That started my affair with Schrade Walden knives as the local feed store sold them, carbon steel blades that I could sharpen. ::nod:: Fast forward to my discovery of AAPK, there I learned the old Case 6254 10 dot could be repaired..Thanks to member Bob Picklesimer aka Elvis, the old trapper was repaired by Case. When the knife was returned to me, the 10 dots were hidden due to whatever Case did when they repaired it. ::shrug:: The blade was cleaned up and sharpened properly but repositioned..
Paying closer attention to the knife, thanks to AAPK, I discovered the spring that operates the spay blade was carbon steel, not an issue but a bit different, maybe a Friday afternoon 5pm job or an early Monday morning job.
It's an old friend, been with me 55 years, doesn't get much pocket time and it probably deserves the rest after being abused by a feller that back then saw it only as a tool.1000002774.jpg1000002773.jpg
Treefarmer
Nice one. That one will be a top tier heirloom someday ::tu::

Re: It’s Trapper Tuesday

Posted: Fri Nov 28, 2025 3:02 am
by Reverand
knife7knut wrote: Tue Nov 25, 2025 11:18 pm Dug this one out of my parts box. Thought one of the back springs was broken but it was a worn tang. Think l will try & revive it for an edc. Not sure what the covers will be yet.
Oooh, that looks like a worthy project!!

Re: It’s Trapper Tuesday

Posted: Fri Nov 28, 2025 5:26 am
by woodwalker
3030remchesterCOLO wrote: Tue Nov 25, 2025 5:05 pm I will post a few this week. First is a CASE XX stag scaled trapper that someone carried for so long that the stag is a smooth as glass with no bumps or ridges. Would love to have all the pocket change that wore this stag smooth. It is even wearing away at the edges. Whoever put this look on it, it is obvious that he cared for it. The second old worn trapper is my only Remington H-T-T. Poor condition but it wont leave my collection.
I like your old Trappers!! Great ole HOK's!!!! :D

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 12:39 pm
by Lansky1
Here's my smooth bone trappers --->
trappers smoth.jpg

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 1:41 pm
by 3030remchesterCOLO
A couple from the drawer. A never sharpen Case XX with red bone. Never being a fan of cracked ice scales the second , a KABAR wears a nice set. When I got the KABAR from a junk box it had a big boo boo on the main blade where it had been used to cut a live electric wire. Big burn and notch. Nothing to do but clean it up and and sharpen the gouge and make a wire stripper out of it.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 2:02 pm
by Lansky1
That modded blade on your trapper looks great - would never know it wasn't supposed to look like that. At first glace, I was like man, thats a cool trapper blade - I'm going to see if I can find one ... then I read you modded it ::tu::

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:30 pm
by ThatWeirdKnifeGuy
Parker Eagle Brand

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:34 pm
by FRJ
I've got some.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:36 pm
by FRJ
Covers by Muskratman.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:37 pm
by FRJ
Some more.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:39 pm
by 3030remchesterCOLO
Lansky1 wrote: Tue Dec 02, 2025 2:02 pm That modded blade on your trapper looks great - would never know it wasn't supposed to look like that. At first glace, I was like man, thats a cool trapper blade - I'm going to see if I can find one ... then I read you modded it ::tu::
All you have to do to get a blade like mine is find someone brave or stupid enough to cut into a high voltage wire.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:40 pm
by FRJ
And these of course.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 4:59 pm
by doglegg
FRJ wrote: Tue Dec 02, 2025 4:40 pm And these of course.
All good but pics 5&6 really caught my eye.

Re: It’s Trapper Tuesday

Posted: Tue Dec 02, 2025 6:48 pm
by woodwalker
Very nice display of Trappers Joe!! I like those Case Slimline Barehead Trappers!! :D