Re: Locking Knives
Posted: Mon Jan 31, 2022 11:50 pm
And a few more.
Ken
Ken
All About Pocket Knives is a knife related resource center for buying, selling, researching, and discussing all things knives
http://www.allaboutpocketknives.com/knife_forum/
http://www.allaboutpocketknives.com/knife_forum/viewtopic.php?t=73880
herbva wrote: ↑Mon Jan 31, 2022 3:37 pm Here are 2 that have less common locking mechanisms. The first 3 pics are an A.G. Russell folding hunter with a bolster lock. The last picture is a Weidmannsheil jack with an internal locking mechanism that requires one to push down on the pen blade (in the closed position) to unlock the primary blade.
Thanks for posting these. I had never heard of a bolster lock before so I learned something today!herbva wrote: ↑Mon Jan 31, 2022 3:37 pm Here are 2 that have less common locking mechanisms. The first 3 pics are an A.G. Russell folding hunter with a bolster lock. The last picture is a Weidmannsheil jack with an internal locking mechanism that requires one to push down on the pen blade (in the closed position) to unlock the primary blade.
Steamboat Willie, I tried my best, but this is the best picture I could get. There is hole in the center liner and the locking bar/lever passes through the hole. The raised up lower part that you can see clearly is what the ricasso of the pen presses on to release the locked blade. The part that's hard to see is the other end of the locking bar on the other side of the center liner that locks into the tang on the primary blade. The pressure from the backsprings on the other side of the locking bar is what forces the raised part of the locking bar into the notch on the tang of the primary blade and locks it as soon as you open the blade. Quite an ingenious mechanism! When I got this knife, I couldn't sleep until I figured out how it worked! Just how I'm wired.Steamboat Willie wrote: ↑Tue Feb 01, 2022 12:47 amherbva wrote: ↑Mon Jan 31, 2022 3:37 pm Here are 2 that have less common locking mechanisms. The first 3 pics are an A.G. Russell folding hunter with a bolster lock. The last picture is a Weidmannsheil jack with an internal locking mechanism that requires one to push down on the pen blade (in the closed position) to unlock the primary blade.I have never seen such creatures! Is it possible to photograph the mechanism on the Weidmannsheil? Or is it hidden too deep inside? I’d like to see how that works!
Mumblypeg, that Queen is something else!![]()
herbva wrote: ↑Tue Feb 01, 2022 2:08 amSteamboat Willie, I tried my best, but this is the best picture I could get. There is hole in the center liner and the locking bar/lever passes through the hole. The raised up lower part that you can see clearly is what the ricasso of the pen presses on to release the locked blade. The part that's hard to see is the other end of the locking bar on the other side of the center liner that pushes the spring back to release the tab on the end of the spring that locks into the notch on the tang on the primary blade. The pressure from the backspring on the other side of the locking bar is what forces the raised part of the end of the spring into the notch on the tang of the primary blade and locks it as soon as you open the blade. Quite an ingenious mechanism! When I got this knife, I couldn't sleep until I figured out how it worked! Just how I'm wired.Steamboat Willie wrote: ↑Tue Feb 01, 2022 12:47 amherbva wrote: ↑Mon Jan 31, 2022 3:37 pm Here are 2 that have less common locking mechanisms. The first 3 pics are an A.G. Russell folding hunter with a bolster lock. The last picture is a Weidmannsheil jack with an internal locking mechanism that requires one to push down on the pen blade (in the closed position) to unlock the primary blade.I have never seen such creatures! Is it possible to photograph the mechanism on the Weidmannsheil? Or is it hidden too deep inside? I’d like to see how that works!
Mumblypeg, that Queen is something else!![]()
![]()
Thank you Willie. Although Queen made it, it’s stamped Schatt & Morgan. It’s a clone of an old, rare Remington 6816 humpback lockback whittler pattern. viewtopic.php?f=67&t=66686 Queen did a great job with what looks like a complicated pattern to make. I’ve never seen an original old Schatt & Morgan in that pattern so not sure if they made one like it. Someone here probably knows.
Nice one!
That Case/Bose Lockback whittler is killer!
Great thread Tom!
It’ll get some serious pocket time. I’ve been wanting to try one of the assisted openers but haven’t pulled the trigger until now. But the addition of a bolster lock pushed me over the edge, even though it’s a more modern version. It’s Herb’s fault.
Thanks Jeff! It was a gift from my wife. And it’s as near perfect as she is.
Thanks Marco!
I-man! If you go to www.knifepurveyor.com , or, www.arizonacustomknives.com , and search "Barry Wood Knives" you'll see a bunch more examples. Both links are safe! Even just a Google search will produce results! They're super-cool knives, but not inexpensive!
Madmarco wrote: ↑Tue Feb 01, 2022 5:56 amI-man! If you go to www.knifepurveyor.com , or, www.arizonacustomknives.com , and search "Barry Wood Knives" you'll see a bunch more examples. Both links are safe! Even just a Google search will produce results! They're super-cool knives, but not inexpensive!![]()