Mail Call !-Post your new pick-ups here............

[Papa Bones]

I picked this one up over the weekend. Just now getting around to posting it. Mainly because the tip had been broken off the Main clip blade and I wanted to work that before I posted it. It is a Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed, It has Stainless Steel Blades, It has the Craftsman shield with the crown border, and jigged Delrin handles. It has great snap on both blades with no wobble. A great little addition to my Craftsman family and into my EDC rotation from time to time. I didn't really have to do any cleaning, just re-tip the Clip Blade, and sharpen it .

[doglegg]

Good job on the retip. That craftsman shield is my favorite. Sweet little pick up.

[jmh58]

Man!!! Yinz are killing it with these fine "Pick-Ups" !!! Nice Gents!!!
John

[Madmarco]

I picked this one up over the weekend. Just now getting around to posting it. Mainly because the tip had been broken off the Main clip blade and I wanted to work that before I posted it. It is a Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed, It has Stainless Steel Blades, It has the Craftsman shield with the crown border, and jigged Delrin handles. It has great snap on both blades with no wobble. A great little addition to my Craftsman family and into my EDC rotation from time to time. I didn't really have to do any cleaning, just re-tip the Clip Blade, and sharpen it .
Craftsman Pen 9524 Stainless_a.png
Craftsman Pen 9524 Stainless_b.png
Craftsman Pen 9524 Stainless_d.png

Nice save Smitty, the knife looks great!

[Ivoryman]

I picked this one up over the weekend. Just now getting around to posting it. Mainly because the tip had been broken off the Main clip blade and I wanted to work that before I posted it. It is a Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed, It has Stainless Steel Blades, It has the Craftsman shield with the crown border, and jigged Delrin handles. It has great snap on both blades with no wobble. A great little addition to my Craftsman family and into my EDC rotation from time to time. I didn't really have to do any cleaning, just re-tip the Clip Blade, and sharpen it .
Craftsman Pen 9524 Stainless_a.png
Craftsman Pen 9524 Stainless_b.png
Craftsman Pen 9524 Stainless_d.png

Good looking piece. Nice save on the tip too.

[Papa Bones]

Good job on the retip. That craftsman shield is my favorite. Sweet little pick up.

Nice save Smitty, the knife looks great!

Good looking piece. Nice save on the tip too.

Appreciate it guys!

[dlr110]

I picked this one up over the weekend. Just now getting around to posting it. Mainly because the tip had been broken off the Main clip blade and I wanted to work that before I posted it. It is a Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed, It has Stainless Steel Blades, It has the Craftsman shield with the crown border, and jigged Delrin handles. It has great snap on both blades with no wobble.

Very nice Smitty. I remember my Dad and all of his tools. If it didn't say "Craftsman" on, it wasn't what he wanted. And I'm pretty sure he carried a Craftsman Stockman knife at some point.

[dlr110]

I got this one yesterday. This should be fun once I find the scales I want to put on it in a large enough size.
I won't need to sharpen it, that sucker is already hair split'en sharp.

[Papa Bones]

I picked this one up over the weekend. Just now getting around to posting it. Mainly because the tip had been broken off the Main clip blade and I wanted to work that before I posted it. It is a Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed, It has Stainless Steel Blades, It has the Craftsman shield with the crown border, and jigged Delrin handles. It has great snap on both blades with no wobble.

Very nice Smitty. I remember my Dad and all of his tools. If it didn't say "Craftsman" on, it wasn't what he wanted. And I'm pretty sure he carried a Craftsman Stockman knife at some point.

Thanks David. Yeah, I myself have invested in a lot of Craftsman Tools. Used to be a good bet. If one broke or wore out, you just took it back and swapped it for a new one. They would last for years and were proudly made in the U.S.A. But now, with a lot of the Sears stores gone, and a lot of the newer Craftsman tools you find at the not tall big box Home Improvement store being made outside of the U.S.A. I hate for any of them to wear out now.

[ken98k]

I'm really loving this new Schrade USA 160ot

[TPK]

I'm really loving this new Schrade USA 160ot

Nice looking knife Ken! Congrats Buddy!

[TPK]

I picked this one up over the weekend... Craftsman 9524 two blade serpentine Pen knife. 2-3/4" closed...

Great looking find Smitty! Love the size & the whole package really! Great looking little pen knife and a perfect EDC! Congrats Buddy!

[TPK]

I got this one yesterday. This should be fun once I find the scales I want to put on it in a large enough size.
I won't need to sharpen it, that sucker is already hair split'en sharp.

That should be a fun project David! Can't wait to see more pictures when it's finished!

[TPK]

Here is another Robeson by Queen. My second sawcut bone. I like these RCC knives as well as any barlow I own. Queen did an incredible job on these.

Beautiful Barlow my friend!

[royal0014]

My birthday knife finally arrived. Antique bone Rogers corncob jig
Industrial LED lighting does nothing for photography ....

[Sharpnshinyknives]

Thanks Ivoryman, Smitty and Tom.

I like that Craftsman. You did a great job on the tip. When will people learn not to use a knife like a screwdriver?

[Ripster]

My birthday knife finally arrived. Antique bone Rogers corncob jig
Industrial LED lighting does nothing for photography ....

The Antique bone handles look great on that piece,looks to be worth the wait

[Quick Steel]

David, Your knife kit is providing you with a pattern which is very similar to a design Bob Lum provided to Spyderco. He used micarta but it will be interesting to see what you choose.

[jmh58]

David, Your knife kit is providing you with a pattern which is very similar to a design Bob Lum provided to Spyderco. He used micarta but it will be interesting to see what you choose.P1040152 (2).JPG

I droll every time you post that beauty!!!
John

[treefarmer]

My birthday knife finally arrived. Antique bone Rogers corncob jig
Industrial LED lighting does nothing for photography ....

That's a handsome knife, Chris! A mighty fine birthday knife.
Treefarmer

[toomanyknives]

A great batch of current Pickups! Love the little Craftsman, can't wait to see the DIY project. and the Copperhead is a classic!

[Quick Steel]

I'm so glad you like it John.

[dlr110]

My birthday knife finally arrived. Antique bone Rogers corncob jig
Industrial LED lighting does nothing for photography ....

Chris that is a mighty fine looking knife in anybody's collection!

[dlr110]

I got this one yesterday. This should be fun once I find the scales I want to put on it in a large enough size.
I won't need to sharpen it, that sucker is already hair split'en sharp.

That should be a fun project David! Can't wait to see more pictures when it's finished!

Thank you Tom, I have 3 fixed blades I need to make handles for. I may even get a little creative this next time and use spacers or inlays on them, haven't decided yet.

[dlr110]

David, Your knife kit is providing you with a pattern which is very similar to a design Bob Lum provided to Spyderco. He used micarta but it will be interesting to see what you choose.P1040152 (2).JPG

Thank you Garry, I haven't decided yet. I have some beautiful Ironwood to use on one of the 3 fixed blades I'm working on. I'm also trying to finish my next book. Just not enough hours in the day.