Knife Loss

Art In Colorado · Post by **Art In Colorado** » Sat Nov 30, 2019 6:39 pm

I lost my Ellenville New York Schrade Trapper

So am now looking for a US made trapper to replace it. So far I found a Bear and Son Carbon Series for $65.00. Not sure about the quality since I have never seen one other then ad's. Also considering just getting a Buck Trapper. Think they are still made in US. Any info you all have would be appreciated.

Mumbleypeg · Post by **Mumbleypeg** » Sat Nov 30, 2019 6:50 pm

Sorry for your loss.

Some options for finding a made in U,S.A. Trapper would be Case (they make trappers in both carbon steel (CV) and stainless, and with a multitude of handle materials, with prices starting under $45 http://www.casexx.com/Pattern/DisplayPa ... nAutoID=60.

You might find an honest old Ellenville Schrade on eBay.

I can’t comment on the Bear trapper as I’ve never had one. I’ve heard both good and bad reviews. The Buck should be a good knife but look closely for where it’s made. They make some in the U.S. but some aren’t.

Ken

Sharpnshinyknives · Post by **Sharpnshinyknives** » Sat Nov 30, 2019 9:26 pm

Art In Colorado wrote: ↑Sat Nov 30, 2019 6:39 pm I lost my Ellenville New York Schrade Trapper So am now looking for a US made trapper to replace it. So far I found a Bear and Son Carbon Series for $65.00. Not sure about the quality since I have never seen one other then ad's. Also considering just getting a Buck Trapper. Think they are still made in US. Any info you all have would be appreciated.

I’ve had Bear trappers and I was impressed. With Bear the quality is hit and miss but if you get a good one it’s a good one and works and wears well.

jerryd6818 · Post by **jerryd6818** » Sat Nov 30, 2019 10:19 pm

Over 100 Schrade USA available on eBay --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0 --- at various ages/condition and of course various prices.

Almost 6000 Case Trappers on eBay --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0

16 Buck USA Trappers --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0

3 Utica USA Trappers --- https://www.ebay.com/sch/i.html?_from=R ... sa+trapper --- (I have one of these. It's a very nice knife IMO)

Modern Slip Joints · Post by **Modern Slip Joints** » Sat Nov 30, 2019 10:25 pm

To Buck's credit the blister packs their Chinese made knives come in are marked made in China. They are also marked as having softer Stainless steel blades. The packaging of the knives they make themselves are marked made in USA and most are marked as being made with their harder 420HC stainless. The other clue is knives Buck made themselves have had a date code on the tang since 1986. Foreign made and contracted Bucks do not have the date code. I've never seen a Buck Trapper that was not stainless steel so if you do not want stainless look at other brands.

Case's least expensive yellow Delrin handled carbon steel Trapper is in all the smaller local hardware stores. It is the most popular of Case's knives in my area. They make stainless Trappers with a great number of handle colors and materials but only a few variations with carbon steel blades.

With some small risk of being screwed tons of trappers from various makers are sold through eBay. December into early January are a buyers market for products that are usually bought by men for themselves. That includes eBay knives. Some years after Christmas sales in the big box stores include knives at a big discount.

ozzie marie · Post by **ozzie marie** » Sat Nov 30, 2019 10:52 pm

Art,

The first place I would look is here in one of the many AAPK stores.

If you can't find what you would like, PM me and I'm sure I can set you up with an Ellenville New York Schrade Trapper.

Keith

OLDE CUTLER · Post by **OLDE CUTLER** » Sun Dec 01, 2019 12:26 am

Art In Colorado wrote: ↑Sat Nov 30, 2019 6:39 pm I lost my Ellenville New York Schrade Trapper So am now looking for a US made trapper to replace it. So far I found a Bear and Son Carbon Series for $65.00. Not sure about the quality since I have never seen one other then ad's. Also considering just getting a Buck Trapper. Think they are still made in US. Any info you all have would be appreciated.

Some of the problems with the quality of Bear & Son knives was discussed here, as well as pictures of 2 of mine that have issues.
viewtopic.php?f=2&t=59287&hilit=Bear

KnifeSlinger#81 · Post by **KnifeSlinger#81** » Sun Dec 01, 2019 3:28 am

Art In Colorado wrote: ↑Sat Nov 30, 2019 6:39 pm I lost my Ellenville New York Schrade Trapper So am now looking for a US made trapper to replace it. So far I found a Bear and Son Carbon Series for $65.00. Not sure about the quality since I have never seen one other then ad's. Also considering just getting a Buck Trapper. Think they are still made in US. Any info you all have would be appreciated.

Sorry you lost your knife.

If you want another schrade there are pretty much always a lot of usa ones on ebay. What model exactly are you looking for?

tongueriver · Post by **tongueriver** » Sun Dec 01, 2019 3:50 am

jerryd6818 wrote: ↑Sat Nov 30, 2019 10:19 pm Over 100 Schrade USA available on eBay --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0 --- at various ages/condition and of course various prices.

Almost 6000 Case Trappers on eBay --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0

16 Buck USA Trappers --- https://www.ebay.com/sch/i.html?_from=R ... r&_sacat=0

3 Utica USA Trappers --- https://www.ebay.com/sch/i.html?_from=R ... sa+trapper --- (I have one of these. It's a very nice knife IMO)

This is all you need to know. Do NOT buy a Bear & Son or Communist Chinese knife.

stumpstalker · Post by **stumpstalker** » Tue Dec 03, 2019 5:20 pm

Art:

Do you have a photo of the lost Ellenville Schrade Trapper?, so that:

1) we can fully sympathize with your loss, and;

2) have a better idea of what might be suggested as a worthy replacement

Art In Colorado · Post by **Art In Colorado** » Thu Dec 19, 2019 12:54 am

Happy day! I found my Schrade Trapper. I had knee replacement on Oct 14. and could not drive for a couple of weeks. Was going to P-T twice a week and wore my sleep pants while there. My wife drove me. I must have put it in those floppy pants pocket. Well, while cleaning my car today I noticed a shiney piece of metal hiding behind the passenger side seat belt floor attachment and it was my Elenville N.Y. Schrade Trapper. I want to thank all of the folks replys for various replacements.

1967redrider · Post by **1967redrider** » Thu Dec 19, 2019 2:52 am

Glad to read this, it's like Christmas came early I bet. Being reunited with a lost friend . . . priceless!

Colonel26 · Post by **Colonel26** » Thu Dec 19, 2019 3:17 am

Wonderful news! I’m so glad you found it.

If you ever do need a replacement though it’s hard to beat a plain ol yaller handled CASE with CV blades. They won’t break the bank and are tough as nails.

jmh58 · Post by **jmh58** » Thu Dec 19, 2019 1:39 pm

John

bighomer · Post by **bighomer** » Thu Dec 19, 2019 2:18 pm

Always a happy time when a misplaced knife shows up.

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Thu Dec 19, 2019 2:57 pm

It is an especially happy day when a lost knife is found - and double that when it is NOT found in the clothes washer!

All About Pocket Knives

Knife Loss

Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss

Re: Knife Loss