Page 1 of 1
Buck Knife inflation
Posted: Sun Feb 15, 2026 8:43 pm
by 227UH
I do my grocery shopping at Walmart, and I usually walk through the sporting goods department and look at the knives in the cabinet. I remember back in 2020 the Buck 110 was $35 then they bumped it up to $65. I still walk through there and look at them, hoping they will lower the price. But no, they just raised it again, up to $90. I went home and got online to check the buckknives website, and sure enough, their price is also $90.
Re: Buck Knife inflation
Posted: Sun Feb 15, 2026 9:02 pm
by Railsplitter
Prices certainly have increased. On just about everything.
I’m glad I bought most of the Buck knives that I wanted in 2022. They were starting to increase in price then but looking at today’s prices, I feel like I jumped in at a good time.
Re: Buck Knife inflation
Posted: Sun Feb 15, 2026 9:38 pm
by Modern Slip Joints
Before Wally increased their 110 price to $35 their 110s were $27 for a few years. Maybe 5 years? I assume Wally had negotiated a bulk purchase. During those years I bought an older 110 from a gun/pawn shop for $18. Other than needing some green cleaned off it is in excellent condition. To pry $90 out of my hand with a 110 it would have to have super duper stainless alloy, stag or two blades.
I wish I'd bought one of the 110s that had both 110 and 112 clip point blades. I thought the ones I saw sell on ebay cost to much. Now I realize I NEED one. I just have to figure out what I need it for.
Here's a question for Railsplitter. An ebay ad for a "rare" linerlock 110 went past on my screen yesterday. No, it was not an error writing the description. Why would Buck have made that? Do you know anything about them?
Re: Buck Knife inflation
Posted: Sun Feb 15, 2026 9:45 pm
by robpa
They made 300 of em 97-98. Thats according to joe houser. A good find, if ya find one.
Re: Buck Knife inflation
Posted: Sun Feb 15, 2026 9:54 pm
by Railsplitter
Modern Slip Joints wrote: ↑Sun Feb 15, 2026 9:38 pm
Here's a question for Railsplitter. An ebay ad for a "rare" linerlock 110 went past on my screen yesterday. No, it was not an error writing the description. Why would Buck have made that? Do you know anything about them?
I had never heard of or seen one but I did find a video within a thread about it on another forum.
https://youtu.be/4RacpEgxjeY
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 2:38 am
by 227UH
Railsplitter wrote: ↑Sun Feb 15, 2026 9:02 pm
Prices certainly have increased. On just about everything.
I’m glad I bought most of the Buck knives that I wanted in 2022. They were starting to increase in price then but looking at today’s prices, I feel like I jumped in at a good time.
Yes that was a good time. I was strictly a Schrade collector until I felt like the prices were getting too high on unused USA knives. I still had the knife fever, so I switched over to Buck. That way I got "MORE BANG FOR THE BUCK".
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 2:59 am
by 227UH
Modern Slip Joints wrote: ↑Sun Feb 15, 2026 9:38 pm
Before Wally increased their 110 price to $35 their 110s were $27 for a few years. Maybe 5 years? I assume Wally had negotiated a bulk purchase. During those years I bought an older 110 from a gun/pawn shop for $18. Other than needing some green cleaned off it is in excellent condition. To pry $90 out of my hand with a 110 it would have to have super duper stainless alloy, stag or two blades.
I wish I'd bought one of the 110s that had both 110 and 112 clip point blades. I thought the ones I saw sell on ebay cost to much. Now I realize I NEED one. I just have to figure out what I need it for.
Here's a question for Railsplitter. An ebay ad for a "rare" linerlock 110 went past on my screen yesterday. No, it was not an error writing the description. Why would Buck have made that? Do you know anything about them?
That's interesting, I didn't know about the dual blade 110/112 combo hunter. That must be a heavy knife. That's the way I like em. When I carry one in my back pocket I know it's there, I don't have to keep checking to make sure it's in my pocket, I can feel it weighing down my jeans.
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 1:34 pm
by robpa
Prices are crazy on everything. How many things can ya buy today for $15 that will last several lifetimes with some care.?
New F150 @ $70,000. new side by side @ $18,000.... new fridge @ $1200.. A steak @ $17. And so it goes!
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 2:08 pm
by OLDE CUTLER
Railsplitter wrote: ↑Sun Feb 15, 2026 9:54 pm
Modern Slip Joints wrote: ↑Sun Feb 15, 2026 9:38 pm
Here's a question for Railsplitter. An ebay ad for a "rare" linerlock 110 went past on my screen yesterday. No, it was not an error writing the description. Why would Buck have made that? Do you know anything about them?
I had never heard of or seen one but I did find a video within a thread about it on another forum.
https://youtu.be/4RacpEgxjeY
Was that something Buck actually made or a Frankenknife put together by a "mechanic"? If Buck made it why would it have the handle recesses for both the liner lock and the conventional lock lever?
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 2:21 pm
by Railsplitter
OLDE CUTLER wrote: ↑Mon Feb 16, 2026 2:08 pm
Railsplitter wrote: ↑Sun Feb 15, 2026 9:54 pm
Modern Slip Joints wrote: ↑Sun Feb 15, 2026 9:38 pm
Here's a question for Railsplitter. An ebay ad for a "rare" linerlock 110 went past on my screen yesterday. No, it was not an error writing the description. Why would Buck have made that? Do you know anything about them?
I had never heard of or seen one but I did find a video within a thread about it on another forum.
https://youtu.be/4RacpEgxjeY
Was that something Buck actually made or a Frankenknife put together by a "mechanic"? If Buck made it why would it have the handle recesses for both the liner lock and the conventional lock lever?
Good question but it was made by Buck. I saw the post from Joe Houser that robpa mentioned above. I assume it was easier to use parts already in stock than to fabricate new ones but that’s just a guess.
Re: Buck Knife inflation
Posted: Mon Feb 16, 2026 10:49 pm
by robpa
I like that kinda stuff. it creates a niche to go after. Ive got a couple queens that I at first thought were bogus, so did others. Come to find out they are the real thing, in very low numbers. Not exotic, just a bit different/
Re: Buck Knife inflation
Posted: Tue Feb 17, 2026 1:00 am
by Jeepergeo
IMHO, a standard Buck 110 for under $100 is a fair price. The Buck 110 is an iconic product and Made in the USA.
Inflation takes it toll, and unless there is deflation, inflated prices are compounded by future inflation. A $100 knife in January 2018 would be $131.10 in January 2026 due to inflation alone. Of course, sometimes manufacturers can reduce the impact of inflation through process optimization.
An omlette breakfast with coffee routinely runs $21+ not including tax and tip. I bought 2 Winchells plain cake donuts that set me back about $4.50! Yikes.
Annual U.S. Inflation Rates (2018–2025):
2025: 2.6% (Estimated)
2024: 2.9%
2023: 4.1%
2022: 8.0%
2021: 4.7%
2020: 1.2%
2019: 1.8%
2018: 2.4%
Re: Buck Knife inflation
Posted: Fri Feb 20, 2026 1:51 pm
by OLDE CUTLER
Jeepergeo wrote: ↑Tue Feb 17, 2026 1:00 am
IMHO, a standard Buck 110 for under $100 is a fair price. The Buck 110 is an iconic product and Made in the USA.
Inflation takes it toll, and unless there is deflation, inflated prices are compounded by future inflation. A $100 knife in January 2018 would be $131.10 in January 2026 due to inflation alone. Of course, sometimes manufacturers can reduce the impact of inflation through process optimization.
An omlette breakfast with coffee routinely runs $21+ not including tax and tip. I bought 2 Winchells plain cake donuts that set me back about $4.50! Yikes.
Annual U.S. Inflation Rates (2018–2025):
2025: 2.6% (Estimated)
2024: 2.9%
2023: 4.1%
2022: 8.0%
2021: 4.7%
2020: 1.2%
2019: 1.8%
2018: 2.4%
I know what you mean, $2 + for a donut really bites.