Page 1 of 1
3 3/8” Schrade auto
Posted: Mon Dec 08, 2025 3:23 am
by stockman
On these double switchblades, why does so many of these knives not latch the small blade. It will bounce. Harold
Re: 3 3/8” Schrade auto
Posted: Mon Dec 08, 2025 3:36 pm
by btrwtr
Not sure why Harold. Could be that as the knife is used it begins to loosen up or that it wasn't a QC concern. The object being that you didn't need a fingernail to open the knife is still met even with the blade bouncing out of the open and locked position. I prefer not to have the blades bouncing back but it is very common.
Re: 3 3/8” Schrade auto
Posted: Mon Dec 08, 2025 6:10 pm
by stockman
It seems almost normal to me I’ve had several that worked that way. I pinched it at the blade pin to try to tighten it up didn’t help. I would like to peen the pin but probably break the covers. Harold
Re: 3 3/8” Schrade auto
Posted: Mon Dec 08, 2025 8:38 pm
by Bill DeShivs
When the knives were new, they were tighter and bounce back didn't happen.
Re: 3 3/8” Schrade auto
Posted: Mon Dec 08, 2025 10:04 pm
by stockman
Thanks Bill. Harold
Re: 3 3/8” Schrade auto
Posted: Tue Dec 09, 2025 9:13 pm
by Bill DeShivs
It's an easy repair, but you have to know what you are doing.
Re: 3 3/8” Schrade auto
Posted: Tue Dec 09, 2025 10:13 pm
by stockman
I thought about trying to peen the blade pin. Also thought about damage I might do to the handle material. Harold