Page 1 of 1
Identifying Possible Schrade?
Posted: Sun Jan 12, 2025 8:28 pm
by Bhhall123
Looking to identify this new knife I bought. First thought it was a Schrade knife because of the shield on handle and carbon steel. But after cleaning it up a bit, couldn’t find stamps on blade showing branding. Any guesses or ideas that of manufacture?
Re: Identifying Possible Schrade?
Posted: Sun Jan 12, 2025 8:55 pm
by knifeaholic
Its a Camillus. I have several mint ones like it. Some were made with no tang stamp, jsut a blade etch.
Re: Identifying Possible Schrade?
Posted: Sun Jan 12, 2025 10:34 pm
by garddogg56
Wasn't it made for Craftsman andSears?
Re: Identifying Possible Schrade?
Posted: Mon Jan 13, 2025 1:49 am
by tongueriver
garddogg56 wrote: ↑Sun Jan 12, 2025 10:34 pm
Wasn't it made for Craftsman andSears?
Yes. However, something in my feeble mind says that some of those with that stamp were made for Sears by Ulster instead of Camillus. I wish my memory served me better.
Re: Identifying Possible Schrade?
Posted: Mon Jan 13, 2025 3:44 am
by Ridgegrass
I'm not familiar with any Schrade "High Carbon" knives. But....?? Here's a Craftsman, "Sta-Sharp". j.O'.
Re: Identifying Possible Schrade?
Posted: Mon Jan 13, 2025 11:13 am
by garddogg56
Yes
Re: Identifying Possible Schrade?
Posted: Sat Jan 18, 2025 11:18 pm
by Madmarco
Ridgegrass wrote: ↑Mon Jan 13, 2025 3:44 am
I'm not familiar with any Schrade "High Carbon" knives. But....?? Here's a Craftsman, "Sta-Sharp". j.O'.
That's a nice knife, John, would that be considered as a "gunstock", or "swell-center", or neither? Thanks!
Re: Identifying Possible Schrade?
Posted: Sun Jan 19, 2025 3:37 pm
by Ridgegrass
It's a "Crown" or "Coffin" jack, according to Levine. It has become my EDC and a favorite. Thanks.
Re: Identifying Possible Schrade?
Posted: Sun Jan 19, 2025 4:02 pm
by Ridgegrass
Hope you can read this, Mark.
Re: Identifying Possible Schrade?
Posted: Sun Jan 19, 2025 8:52 pm
by Madmarco
Thanks for answering my question, John, it's not hard to see why it's a favorite. I was able to read your posted picture fine, but when I enlarged it it posted upside down, go figure.
I apologize for wasting your time with all my questions, it's just that you post things I've not seen before or I'm unsure of a feature, and you seem to have the answers.
Re: Identifying Possible Schrade?
Posted: Mon Jan 20, 2025 2:14 pm
by Ridgegrass
I enjoy hearing from you, Pal. O'.
Re: Identifying Possible Schrade?
Posted: Mon Jan 20, 2025 2:20 pm
by 1967redrider
Try this one, Mark. If I vertically orient pictures, they enlarge sideways sometimes, but I found a work-around.
No one wants to read standing on their heads.
Re: Identifying Possible Schrade?
Posted: Tue Jan 21, 2025 12:35 am
by Madmarco
Ridgegrass wrote: ↑Mon Jan 20, 2025 2:14 pm
I enjoy hearing from you, Pal. O'.
Re: Identifying Possible Schrade?
Posted: Tue Jan 21, 2025 12:36 am
by Madmarco
1967redrider wrote: ↑Mon Jan 20, 2025 2:20 pm
Try this one, Mark. If I vertically orient pictures, they enlarge sideways sometimes, but I found a work-around.
No one wants to read standing on their heads.
Yep, that did it, buddy, thank you!
What beautiful knives when seen properly!
No one wants to read standing on their heads. 