Page 1 of 1
Repro Bullet Knife list
Posted: Sun Nov 19, 2023 4:17 am
by tvic
Someone posted a couple of pages from a book here in the past that listed all the Bullet knives from 1982 to 2007 - and it showed how many were produced each year, as well as other information. Very helpful. Is there a list somewhere that gives the rest of each year's production numbers - 2008 to present?
Re: Repro Bullet Knife list
Posted: Sun Nov 19, 2023 11:06 pm
by Mumbleypeg
Hopefully someone can help. In early 1980s when those authorized Remington Bullet reproductions first appeared, they were made by Camillus. Until Camillus ceased to operate (~2007) they were the makers. Then comes a period of uncertainty.
Remington has had a rocky road, with corporate divestiture, breakups, etc. I’m not sure what has happened to the ownership of the rights to make Remington knives. There have been some sporadic releases, like those recently done by GEC and Bear. Someone may know, but I’m not sure there has been an annual series of Bullet knife reproductions since the demise of Camillus.
The annual Camillus-made reproductions were uniformly of good quality. Since then………….
So I’ll be interested to see if anyone can answer your request.
Ken
Re: Repro Bullet Knife list
Posted: Sun Nov 19, 2023 11:56 pm
by 1967redrider
I have a poster up through 2012, hopefully you can zoom in and it helps.
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 2:13 am
by Jacknifeben
I have a 1996 Remington Bullet calendar with pictures of 12 different style bullets.
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 2:23 am
by Jacknifeben
Hard to find, all 12 months feature different knives.
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 4:40 am
by tvic
Thanks for all your help, guys! I can kinda figure out from Ebay many of the patterns and the year. Still would be nice to know how many were produced in a given year, though.
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 1:28 pm
by 1967redrider
tvic wrote: ↑Mon Nov 20, 2023 4:40 am
Thanks for all your help, guys! I can kinda figure out from Ebay many of the patterns and the year. Still would be nice to know how many were produced in a given year, though.
Price and Zalesky list these repros, but here again, the newer ones are missing. Check out this link-
https://allaboutpocketknives.com/knife_ ... t#p1055049
You would need to find a more recently released reference book.
*edit- here's vit_213's list through 2022 (attached).
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 2:48 pm
by tvic
VERY helpful, redrider- Thanks!
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 5:12 pm
by Mumbleypeg
Thanks John, that is good info. It looks like the last one Camillus made was 2005, and recently there have been multiple “Bullet” releases each year, with various features. Kind of dilutes the concept IMHO, but others may like it.
Ken
Re: Repro Bullet Knife list
Posted: Mon Nov 20, 2023 10:34 pm
by Vit_213
Mumbleypeg wrote: ↑Mon Nov 20, 2023 5:12 pm
It looks like the last one Camillus made was 2005, and recently there have been multiple “Bullet” releases each year, with various features. Kind of dilutes the concept IMHO
The "Bullet" concept died after Camillus left (IMHO)

.
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 2:19 am
by enuf
On the list above it shows two Bullets in 2022 - what's the deal with that?
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:04 pm
by Vit_213
enuf wrote: ↑Wed Jan 17, 2024 2:19 am
On the list above it shows two Bullets in 2022 - what's the deal with that?
Everything is correct. Bullet knife by Bear & Son and Silver Bullet knife by GEC.
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:15 pm
by enuf
So, 2022 had two "annual bullet knives" and the other years just had one?
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:32 pm
by Vit_213
enuf wrote: ↑Wed Jan 17, 2024 9:15 pm
So, 2022 had two "annual bullet knives" and the other years just had one?
No, it’s just that in 2022, for the first time, Bullet and Silver Bullet knives were made by different manufacturers. Therefore they are separated in the table.
Original table here
https://vit213.narod.ru/remington/bullet.html (sorry, but this site is in Russian).
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:34 pm
by enuf
Perfect - I saw that table in a post but could not read it - thank you.
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:47 pm
by enuf
Vit_213 wrote: ↑Wed Jan 17, 2024 9:32 pm
enuf wrote: ↑Wed Jan 17, 2024 9:15 pm
So, 2022 had two "annual bullet knives" and the other years just had one?
No, it’s just that in 2022, for the first time, Bullet and Silver Bullet knives were made by different manufacturers. Therefore they are separated in the table.
Original table here
https://vit213.narod.ru/remington/bullet.html (sorry, but this site is in Russian).
This link you sent me, it opens in that real nice list, but if you hit the back button it takes you to the pictures, which is very nice. However, the first pictured knife there says "1972" and then goes to 1983 and I think I am reading that the reproduction program started in 1982. Is this a misprint or am I missing something?
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 9:59 pm
by Vit_213
enuf wrote: ↑Wed Jan 17, 2024 9:47 pm
This link you sent me, it opens in that real nice list, but if you hit the back button it takes you to the pictures, which is very nice. However, the first pictured knife there says "1972" and then goes to 1983 and I think I am reading that the reproduction program started in 1982. Is this a misprint or am I missing something?
The official countdown of Bullet reproductions goes back to 1982, but I don’t have this knife (this site contains photos only of knives from my collection.). The 1972 image has a link to my review of this knife. This is in Russian, but you can use Google translation (I hope it will be more or less correct).
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 10:38 pm
by enuf
Wow! I have been reading this (translated of course). Man, I am enjoying it too!
Re: Repro Bullet Knife list
Posted: Wed Jan 17, 2024 10:46 pm
by Vit_213
enuf wrote: ↑Wed Jan 17, 2024 10:38 pm
Wow! I have been reading this (translated of course). Man, I am enjoying it too!
Thanks
