Page 1 of 2

Miller Bros Navy Gravity Knife

Posted: Tue Jul 18, 2023 11:34 pm
by kennedy knives
Don't see to many of these . You can Still see the Etching on the Blade U.S.Navy . Works Good missing the ring at the base of knife
Wonder what stories it could tell??????

Re: Miller Bros Navy Gravity Knife

Posted: Tue Jul 18, 2023 11:49 pm
by bestgear
Loving those covers with brass screws that haven’t been buggered up - thanks for sharing such an oldie Gary.

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 12:30 am
by doglegg
Wonderful old knife.

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 1:20 am
by kennedy knives
doglegg wrote: ↑Wed Jul 19, 2023 12:30 am Wonderful old knife.
wonder what stories it could tell.

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 1:21 am
by kennedy knives
bestgear wrote: ↑Tue Jul 18, 2023 11:49 pm Loving those covers with brass screws that haven’t been buggered up - thanks for sharing such an oldie Gary.
Thanks Tom Nice Old Miller Bros

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 2:39 am
by 1967redrider
That knife is tied with a Cattaraugus Pipe Wrench knife for First Place on my Grail Knife list. πŸ˜ŽπŸ‘πŸ‘

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 12:17 pm
by kennedy knives
1967redrider wrote: ↑Wed Jul 19, 2023 2:39 am That knife is tied with a Cattaraugus Pipe Wrench knife for First Place on my Grail Knife list. πŸ˜ŽπŸ‘πŸ‘
::tu:: ::tu:: ::tu:: ::handshake::

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 1:00 pm
by Gone2Three
What a find Gary! ... fantastic example and survivor ::tu::

::handshake:: Randy

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 9:36 pm
by Dan In MI
1967redrider wrote: ↑Wed Jul 19, 2023 2:39 am That knife is tied with a Cattaraugus Pipe Wrench knife for First Place on my Grail Knife list. πŸ˜ŽπŸ‘πŸ‘
Sort of the same here, but my other grail would be a 1978 Case Hawbaker Special.

Thanks for showing that terrific old knife, Gary! ::handshake::

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 10:57 pm
by kennedy knives
Dan In MI wrote: ↑Wed Jul 19, 2023 9:36 pm
1967redrider wrote: ↑Wed Jul 19, 2023 2:39 am That knife is tied with a Cattaraugus Pipe Wrench knife for First Place on my Grail Knife list. πŸ˜ŽπŸ‘πŸ‘
Sort of the same here, but my other grail would be a 1978 Case Hawbaker Special.

Thanks for showing that terrific old knife, Gary! ::handshake::
Thanks Dan saw the Hawbaker on Facebook auction one night this week . I've had a couple of those and someone wanted them more than me ::handshake::

Re: Miller Bros Navy Gravity Knife

Posted: Wed Jul 19, 2023 10:58 pm
by kennedy knives
Gone2Three wrote: ↑Wed Jul 19, 2023 1:00 pm What a find Gary! ... fantastic example and survivor ::tu::

::handshake:: Randy
Thanks Randy

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 2:23 am
by beatsthestockmarket
Let me make a contribution to this subject

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 3:16 am
by 1967redrider
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject

Awesome duo! ::nod::πŸ‘πŸ‘

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 11:32 am
by Rockingkj
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Rare knives! Dandy condition. Looks like you have all the good stuff 😁

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 11:54 am
by wlf
Those have some beautiful handles.

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 2:27 pm
by beatsthestockmarket
1967redrider wrote: ↑Thu May 23, 2024 3:16 am
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject

Awesome duo! ::nod::πŸ‘πŸ‘
Thank You!

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 2:28 pm
by beatsthestockmarket
1967redrider wrote: ↑Thu May 23, 2024 3:16 am
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject

Awesome duo! ::nod::πŸ‘πŸ‘
Thank You

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 2:29 pm
by beatsthestockmarket
wlf wrote: ↑Thu May 23, 2024 11:54 am Those have some beautiful handles.
Thank You

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 2:31 pm
by beatsthestockmarket
Rockingkj wrote: ↑Thu May 23, 2024 11:32 am
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Rare knives! Dandy condition. Looks like you have all the good stuff 😁
Thank You

Even a Blind Hog roots up an acorn occasionally

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 5:10 pm
by RalphAlsip
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Fantastic examples! I have seen these before with the lanyard "ring" attached to the end of the knife. The top example is the first I can recall seeing with the bail/shackle put through the scale and liner. Do you have any insight into why the top example has the "through the scale and liner" bail? Also looks like the blade release/lock mechanism might also be a bit different.

Re: Miller Bros Navy Gravity Knife

Posted: Thu May 23, 2024 10:50 pm
by beatsthestockmarket
RalphAlsip wrote: ↑Thu May 23, 2024 5:10 pm
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Fantastic examples! I have seen these before with the lanyard "ring" attached to the end of the knife. The top example is the first I can recall seeing with the bail/shackle put through the scale and liner. Do you have any insight into why the top example has the "through the scale and liner" bail? Also looks like the blade release/lock mechanism might also be a bit different.
Thank You for the Kind Words Ralph

My understanding is that the bottom knife, with the ring and smaller release lever is the model #1 of the Miller Bros Gravity Knife Series.
The ring proved to be not up to the task, in many cases.

The top knife is the model #2 (slightly improved model) the bail is more substantial, than the ring was.
And the blade release lever has also been improved.

Here is the only example of the Miller Bros Folding Rope Knife that I have.
I have tried to come up with another having the bail, however never accomplished it.
And this folding version just brings up more questions. Regarding "ring", "bail", and "hole drilled for lanyard".
Maybe someone can enlighten us.

Re: Miller Bros Navy Gravity Knife

Posted: Fri May 24, 2024 1:38 pm
by RalphAlsip
beatsthestockmarket wrote: ↑Thu May 23, 2024 10:50 pm
RalphAlsip wrote: ↑Thu May 23, 2024 5:10 pm
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Fantastic examples! I have seen these before with the lanyard "ring" attached to the end of the knife. The top example is the first I can recall seeing with the bail/shackle put through the scale and liner. Do you have any insight into why the top example has the "through the scale and liner" bail? Also looks like the blade release/lock mechanism might also be a bit different.
Thank You for the Kind Words Ralph

My understanding is that the bottom knife, with the ring and smaller release lever is the model #1 of the Miller Bros Gravity Knife Series.
The ring proved to be not up to the task, in many cases.

The top knife is the model #2 (slightly improved model) the bail is more substantial, than the ring was.
And the blade release lever has also been improved.

Here is the only example of the Miller Bros Folding Rope Knife that I have.
I have tried to come up with another having the bail, however never accomplished it.
And this folding version just brings up more questions. Regarding "ring", "bail", and "hole drilled for lanyard".
Maybe someone can enlighten us.
Thank you for the explanation. I didn't realize 2 versions were made, but it makes sense that the ring would be easy to bend or break and damage the knife when it happened. I have added added a v2 to my need to find list. :)

Here is my v1 gravity knife.

Re: Miller Bros Navy Gravity Knife

Posted: Fri May 24, 2024 3:19 pm
by Rockingkj
RalphAlsip wrote: ↑Fri May 24, 2024 1:38 pm
beatsthestockmarket wrote: ↑Thu May 23, 2024 10:50 pm
RalphAlsip wrote: ↑Thu May 23, 2024 5:10 pm
Fantastic examples! I have seen these before with the lanyard "ring" attached to the end of the knife. The top example is the first I can recall seeing with the bail/shackle put through the scale and liner. Do you have any insight into why the top example has the "through the scale and liner" bail? Also looks like the blade release/lock mechanism might also be a bit different.
Thank You for the Kind Words Ralph

My understanding is that the bottom knife, with the ring and smaller release lever is the model #1 of the Miller Bros Gravity Knife Series.
The ring proved to be not up to the task, in many cases.

The top knife is the model #2 (slightly improved model) the bail is more substantial, than the ring was.
And the blade release lever has also been improved.

Here is the only example of the Miller Bros Folding Rope Knife that I have.
I have tried to come up with another having the bail, however never accomplished it.
And this folding version just brings up more questions. Regarding "ring", "bail", and "hole drilled for lanyard".
Maybe someone can enlighten us.
Thank you for the explanation. I didn't realize 2 versions were made, but it makes sense that the ring would be easy to bend or break and damage the knife when it happened. I have added added a v2 to my need to find list. :)

Here is my v1 gravity knife.
That’s a super example you have also!

Re: Miller Bros Navy Gravity Knife

Posted: Fri May 24, 2024 4:36 pm
by beatsthestockmarket
RalphAlsip wrote: ↑Fri May 24, 2024 1:38 pm
beatsthestockmarket wrote: ↑Thu May 23, 2024 10:50 pm
RalphAlsip wrote: ↑Thu May 23, 2024 5:10 pm
Fantastic examples! I have seen these before with the lanyard "ring" attached to the end of the knife. The top example is the first I can recall seeing with the bail/shackle put through the scale and liner. Do you have any insight into why the top example has the "through the scale and liner" bail? Also looks like the blade release/lock mechanism might also be a bit different.
Thank You for the Kind Words Ralph

My understanding is that the bottom knife, with the ring and smaller release lever is the model #1 of the Miller Bros Gravity Knife Series.
The ring proved to be not up to the task, in many cases.

The top knife is the model #2 (slightly improved model) the bail is more substantial, than the ring was.
And the blade release lever has also been improved.

Here is the only example of the Miller Bros Folding Rope Knife that I have.
I have tried to come up with another having the bail, however never accomplished it.
And this folding version just brings up more questions. Regarding "ring", "bail", and "hole drilled for lanyard".
Maybe someone can enlighten us.
Thank you for the explanation. I didn't realize 2 versions were made, but it makes sense that the ring would be easy to bend or break and damage the knife when it happened. I have added added a v2 to my need to find list. :)

Here is my v1 gravity knife.
Beautiful Knife Ralph!

I'm betting that it is the "Mintest" Surviving Example.

Re: Miller Bros Navy Gravity Knife

Posted: Tue May 28, 2024 9:23 pm
by kennedy knives
beatsthestockmarket wrote: ↑Thu May 23, 2024 2:23 am Let me make a contribution to this subject
Very Nice !!!!!!!!