All About Pocket Knives

Posted: **Thu Aug 18, 2022 4:23 am**

I've started re-doing some of my displays lately for a number of reasons. Here are a few of them.

Posted: **Thu Aug 18, 2022 10:20 am**

Very nice

Posted: **Thu Aug 18, 2022 1:05 pm**

Great, love the "39" Series, third down in the last pic. My favorite hunter pattern.

J.O'.

Posted: **Thu Aug 18, 2022 1:08 pm**

Posted: **Thu Aug 18, 2022 1:56 pm**

Nice!

Posted: **Thu Aug 18, 2022 6:42 pm**

I love it when one shares their displays with us all.

Posted: **Fri Aug 19, 2022 8:21 am**

Ridgegrass wrote: ↑Thu Aug 18, 2022 1:05 pm Great, love the "39" Series, third down in the last pic. My favorite hunter pattern. J.O'.

That one is stamped,'' F.A.Bower '' and has a 10 blade. The one below it is stamped,'' G.C.Co. Italy.

Posted: **Fri Aug 19, 2022 8:26 am**

I especially like the display of the large fixed blades.

Posted: **Fri Sep 16, 2022 9:42 pm**

I'm back up and running in my knife work area in the garage. Been working on theses displays today.
Please hold the laughter to a minimum. The 1st one is two knives I bought on our trip to Alaska a couple of years ago. The 2nd one is a African dagger my daughter bought me when she was on the mission field in Ethiopia. Probably a tourist knife but it has precious meaning to me. And lastly my attempt at wood burning with the CASE logo. Crude but it will do for me and I plan to mount some CASE toothpicks and peanuts on it. Included are some pic's of my new knife work area.

Posted: **Fri Sep 16, 2022 10:54 pm**

I enjoy seeing all of it!
(Though I would not know how to work in a clean and organized shop!)

Posted: **Fri Sep 16, 2022 10:56 pm**

dlr110 wrote: ↑Fri Sep 16, 2022 9:42 pm I'm back up and running in my knife work area in the garage. Been working on theses displays today.
Please hold the laughter to a minimum. The 1st one is two knives I bought on our trip to Alaska a couple of years ago. The 2nd one is a African dagger my daughter bought me when she was on the mission field in Ethiopia. Probably a tourist knife but it has precious meaning to me. And lastly my attempt at wood burning with the CASE logo. Crude but it will do for me and I plan to mount some CASE toothpicks and peanuts on it. Included are some pic's of my new knife work area.
20220916_161757.jpg20220916_161743.jpg20220916_154647.jpg20220916_151630.jpg20220916_151651.jpg

Man who works on knives in a safari hat (last pic) is cool in my book.

Posted: **Sat Sep 17, 2022 12:26 am**

Reverand wrote: ↑Fri Sep 16, 2022 10:54 pm I enjoy seeing all of it!
(Though I would not know how to work in a clean and organized shop!)

Thank you Reverand but it won't stay that way very long.

JamieinWV wrote: ↑Fri Sep 16, 2022 10:56 pm Man who works on knives in a safari hat (last pic) is cool in my book.

Jamie that is a pith helmet issued by the U.S. Navy that I got back in the day. It was packed in some of my garage stuff and I just haven't figured out where to put it yet.

Posted: **Sat Sep 17, 2022 2:01 am**

knife7knut wrote: ↑Thu Aug 18, 2022 4:23 am I've started re-doing some of my displays lately for a number of reasons. Here are a few of them.

Those are great displays K7K! Did you make them or buy them, and if bought, where? In picture 1 could we please see and hear more about the all-metal knife below the small pistols, the one that has the larger pistol pointed right at it? Thx!

Posted: **Sat Sep 17, 2022 10:47 am**

dlr110 wrote: ↑Sat Sep 17, 2022 12:26 am Jamie that is a pith helmet issued by the U.S. Navy that I got back in the day. It was packed in some of my garage stuff and I just haven't figured out where to put it yet.

Have you considered your head?

Posted: **Sat Sep 17, 2022 10:56 am**

jerryd6818 wrote: ↑Sat Sep 17, 2022 10:47 am
dlr110 wrote: ↑Sat Sep 17, 2022 12:26 am Jamie that is a pith helmet issued by the U.S. Navy that I got back in the day. It was packed in some of my garage stuff and I just haven't figured out where to put it yet.
Have you considered your head?

Jerry, I'm going to take a picture of it on my head so you can see why I didn't wear it.

Posted: **Sat Sep 17, 2022 4:51 pm**

I wish I knew! Nn tang stamp. Handles & bolsters 1 piece;bolsters covered w/ a thin gold sheet;handles engraved & gold washed;whittler pattern w/Wharncliffe master blade. Blade pivot pins are screws. Looks very old.

Posted: **Sat Sep 17, 2022 8:49 pm**

dlr110 wrote: ↑Sat Sep 17, 2022 10:56 am
jerryd6818 wrote: ↑Sat Sep 17, 2022 10:47 am
dlr110 wrote: ↑Sat Sep 17, 2022 12:26 am Jamie that is a pith helmet issued by the U.S. Navy that I got back in the day. It was packed in some of my garage stuff and I just haven't figured out where to put it yet.
Have you considered your head?
Jerry, I'm going to take a picture of it on my head so you can see why I didn't wear it.

I’m sure it’s because you would be too debonair

Posted: **Sat Sep 17, 2022 9:43 pm**

JamieinWV wrote: ↑Sat Sep 17, 2022 8:49 pm
dlr110 wrote: ↑Sat Sep 17, 2022 10:56 am
jerryd6818 wrote: ↑Sat Sep 17, 2022 10:47 am

Have you considered your head?
Jerry, I'm going to take a picture of it on my head so you can see why I didn't wear it.
I’m sure it’s because you would be too debonair

Of course I would have been much younger and as you said Jamie, Debonair....

: Picture1.jpg (20.69 KiB) Viewed 1732 times

Posted: **Sat Sep 17, 2022 9:56 pm**

Finished that CASE wall plaque with some smalls on it.
Also I added a new AM/FM/SW radio to the work area.

Posted: **Sun Sep 18, 2022 12:49 am**

knife7knut wrote: ↑Sat Sep 17, 2022 4:51 pm I wish I knew! Nn tang stamp. Handles & bolsters 1 piece;bolsters covered w/ a thin gold sheet;handles engraved & gold washed;whittler pattern w/Wharncliffe master blade. Blade pivot pins are screws. Looks very old.

Thank you sir, any chance of more pictures? Thx!

Posted: **Sun Sep 18, 2022 3:49 am**

Madmarco wrote: ↑Sun Sep 18, 2022 12:49 am
knife7knut wrote: ↑Sat Sep 17, 2022 4:51 pm I wish I knew! Nn tang stamp. Handles & bolsters 1 piece;bolsters covered w/ a thin gold sheet;handles engraved & gold washed;whittler pattern w/Wharncliffe master blade. Blade pivot pins are screws. Looks very old.
Thank you sir, any chance of more pictures? Thx!

I've posted pics of it here before but can't remember where. I'll get it out of the display & try to get some decent pics(hard to do with my phone camera).

Posted: **Sun Sep 18, 2022 5:49 am**

dlr110 wrote: ↑Sat Sep 17, 2022 9:43 pm
JamieinWV wrote: ↑Sat Sep 17, 2022 8:49 pm
dlr110 wrote: ↑Sat Sep 17, 2022 10:56 am

Jerry, I'm going to take a picture of it on my head so you can see why I didn't wear it.
I’m sure it’s because you would be too debonair
Of course I would have been much younger and as you said Jamie, Debonair....
Picture1.jpg

I have a woodworking shop in one of my garage and the thing I make mostly is professional sawdust, I have a bunch of stuff hanging in there that is slowly finding its way to the Waste Management can. I look around my garage and think where did all this crap come from? I have keep stuff in there thinking one day I may need it. I’m changing my thinking lately by throwing stuff away.

I’m a member to another forum that caters to garage usage and tools and it has a thread after thread on repurpose stuff. I’m repurposed stuff to the garbage can. But the hat looks good on you

Posted: **Sun Sep 18, 2022 5:55 am**

dlr110 wrote: ↑Sat Sep 17, 2022 9:43 pm
JamieinWV wrote: ↑Sat Sep 17, 2022 8:49 pm
dlr110 wrote: ↑Sat Sep 17, 2022 10:56 am

Jerry, I'm going to take a picture of it on my head so you can see why I didn't wear it.
I’m sure it’s because you would be too debonair
Of course I would have been much younger and as you said Jamie, Debonair....
Picture1.jpg

I would wear that if I were a squid.

Posted: **Sun Sep 18, 2022 6:00 am**

My outlook for my shop

Posted: **Sun Sep 18, 2022 1:06 pm**

" have a woodworking shop in one of my garage and the thing I make mostly is professional sawdust, I have a bunch of stuff hanging in there that is slowly finding its way to the Waste Management can. I look around my garage and think where did all this crap come from? I have keep stuff in there thinking one day I may need it. I’m changing my thinking lately by throwing stuff away. "

and a week after you throw it away you will be looking for it....been there done that many times

All About Pocket Knives

Knife displays

Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays

Re: Knife displays