Page 1 of 1
RRR017 Barlow
Posted: Fri May 06, 2022 5:13 pm
by Beavertail
Got this in the mail today.
The fit and finish are great and I love the spear blade.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 5:59 pm
by 1967redrider
Looks nice! This is a little strange thou . . .
Re: RRR017 Barlow
Posted: Fri May 06, 2022 6:06 pm
by Beavertail
1967redrider wrote: βFri May 06, 2022 5:59 pm
Looks nice! This is a little strange thou . . .
Yep, that's my only complaint with it.
I checked my other RRR's and they don't have this.

Re: RRR017 Barlow
Posted: Fri May 06, 2022 6:19 pm
by kootenay joe
Are you referring to the blade being less wide than the spring ?
RR wanted it to be a strong knife with a spring that will never break, but there is no need for such thickness in the blade stock.
Least, this is how i see it.
kj
Re: RRR017 Barlow
Posted: Fri May 06, 2022 6:27 pm
by edge213
You may be right Joe, but it looks horrible.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 6:40 pm
by 1967redrider
I would worry about the blade shifting from side to side during use or opening.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 7:04 pm
by jmh58
Beavertail wrote: βFri May 06, 2022 5:13 pm
Got this in the mail today.
The fit and finish are great and I love the spear blade.



John

Re: RRR017 Barlow
Posted: Fri May 06, 2022 7:40 pm
by Beavertail
edge213 wrote: βFri May 06, 2022 6:27 pm
You may be right Joe, but it looks horrible.
It looks funny under magnification, but my vision is so bad I hardly notice it.

Re: RRR017 Barlow
Posted: Fri May 06, 2022 7:44 pm
by Beavertail
1967redrider wrote: βFri May 06, 2022 6:40 pm
I would worry about the blade shifting from side to side during use or opening.
I used pretty good force on the blade at the half-stop and fully opened and I couldn't get any wobble.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 7:47 pm
by Beavertail
kootenay joe wrote: βFri May 06, 2022 6:19 pm
Are you referring to the blade being less wide than the spring ?
RR wanted it to be a strong knife with a spring that will never break, but there is no need for such thickness in the blade stock.
Least, this is how i see it.
kj
For it being a relatively small knife, the backspring is beefy.
I would rate the pull between a 5 to 6.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 7:49 pm
by Beavertail
jmh58 wrote: βFri May 06, 2022 7:04 pm
Beavertail wrote: βFri May 06, 2022 5:13 pm
Got this in the mail today.
The fit and finish are great and I love the spear blade.



John
So far this is my favorite pattern they've put out.
Re: RRR017 Barlow
Posted: Fri May 06, 2022 9:38 pm
by edge213
Beavertail wrote: βFri May 06, 2022 7:40 pm
edge213 wrote: βFri May 06, 2022 6:27 pm
You may be right Joe, but it looks horrible.
It looks funny under magnification, but my vision is so bad I hardly notice it.
And I was only going by the pictures

Re: RRR017 Barlow
Posted: Fri May 06, 2022 10:07 pm
by Beavertail
edge213 wrote: βFri May 06, 2022 9:38 pm
Beavertail wrote: βFri May 06, 2022 7:40 pm
edge213 wrote: βFri May 06, 2022 6:27 pm
You may be right Joe, but it looks horrible.
It looks funny under magnification, but my vision is so bad I hardly notice it.
And I was only going by the pictures

Re: RRR017 Barlow
Posted: Sat May 07, 2022 1:06 am
by Froe
Good looking knife. Does the blade pivot perhaps have brass washers or a brass bushing?
Froe
Re: RRR017 Barlow
Posted: Sat May 07, 2022 7:52 pm
by Beavertail
Froe wrote: βSat May 07, 2022 1:06 am
Good looking knife. Does the blade pivot perhaps have brass washers or a brass bushing?
Froe
The Reserve line does have brass washers but I'm not sure about the brass bushing.
Re: RRR017 Barlow
Posted: Fri May 13, 2022 1:49 pm
by ebrandwein
Beavertail wrote: βFri May 06, 2022 5:13 pm
Got this in the mail today.
The fit and finish are great and I love the spear blade.
Thatβs a fine knife there. No gaps in the springs/scales/liners? The RRRs that I have are frankly better made than most knives that cost a lot more from what I have experienced
Re: RRR017 Barlow
Posted: Fri May 13, 2022 2:01 pm
by Beavertail
ebrandwein wrote: βFri May 13, 2022 1:49 pm
Beavertail wrote: βFri May 06, 2022 5:13 pm
Got this in the mail today.
The fit and finish are great and I love the spear blade.
Thatβs a fine knife there. No gaps in the springs/scales/liners? The RRRs that I have are frankly better made than most knives that cost a lot more from what I have experienced

Re: RRR017 Barlow
Posted: Sun Nov 27, 2022 9:43 pm
by Madmarco
I just got my copy yesterday, and I'm happy to read that you guys feel the same as I do about the knife! I didn't originally notice the gaps at the run-up, but when I looked harder, there they are, not as pronounced as in John's picture, but definitely gaps. That irritates the sh*t outta me, cuz otherwise it's a great knife!

!

Re: RRR017 Barlow
Posted: Mon Nov 28, 2022 12:30 pm
by Beavertail
Madmarco wrote: βSun Nov 27, 2022 9:43 pm
I just got my copy yesterday, and I'm happy to read that you guys feel the same as I do about the knife! I didn't originally notice the gaps at the run-up, but when I looked harder, there they are, not as pronounced as in John's picture, but definitely gaps. That irritates the sh*t outta me, cuz otherwise it's a great knife!

! 8)WIN_20221124_17_10_20_Pro.jpgWIN_20221124_17_10_57_Pro.jpg
Congrats Marco!
To me it's the best pattern in the Reserve lineup, but I'm very fond of Barlows so I might be prejudiced.
Re: RRR017 Barlow
Posted: Tue Nov 29, 2022 5:17 am
by Madmarco
Thanks Tim!

I think it's the first of the RRR series I own, but you can be sure there'll be more to come! I am very fond of the Barlow pattern too, although I only have a couple cuz there's just too many others to consider, like BIG autos! lol!
