Clean up question?

Ask knife related questions here. Please answer some if you are an experienced collector!
User avatar
OSCAR
Posts: 166
Joined: Fri May 17, 2019 6:32 pm

Clean up question?

Postby OSCAR » Wed Jul 31, 2019 3:34 pm

I have a knife that is in excellent condition but developed 2 tiny black spots (pinhead size). Flitz didn’t remove them. I thought of trying a Dremel tool with a cotton buffing bit and a bit of jewelers rouge. Is that advisable, or would it be better to leave it alone? Or does anyone know a way to remove them without lessening the value by causing damage? Thanks. Oscar
The most useless thing ever is a dull knife.

Doc B
Bronze Tier
Bronze Tier
Posts: 1446
Joined: Fri Aug 10, 2018 10:57 pm
Location: San Antonio

Re: Clean up question?

Postby Doc B » Wed Jul 31, 2019 3:48 pm

Personally, I'd just try a pencil. If that doesn't remove it, I doubt jewelers rouge would remove it. I'd vote leave it, if pencil doesn't remove it...and keep it oiled or Renaissance wax.
Heretical Refurb / Mods of cheap old folders, since late 2018

User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 30407
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: Clean up question?

Postby jerryd6818 » Wed Jul 31, 2019 3:54 pm

You don't make any mention of where on the knife these two spots are (and didn't post a picture of said spots).That would have some bearing on the cleanup method.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012

User avatar
orvet
Gold Tier
Gold Tier
Posts: 16828
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Clean up question?

Postby orvet » Wed Jul 31, 2019 3:58 pm

I agree with Jerry, location would definitely affect the method that I use.
It's likely you may have a couple of pits that are deep enough in the steel that you cannot get them out without buffing a dimple into the surface where the dimples reside.

If it is on the blade or spring, I would follow docs advice and use a pencil on them. After that I would coat them with Eezox and repeat the Eezox treatment annually. Eezox will prevent rust and it will prevent it from spreading. Renaissance wax makes no such claim to my knowledge.
Dale
AAPK Administrator

orvet@comcast.net
Please visit my AAPK store: www.allaboutpocketknives.com/orvet

"Buy more ammo!" - Johnnie Fain

User avatar
OSCAR
Posts: 166
Joined: Fri May 17, 2019 6:32 pm

Re: Clean up question?

Postby OSCAR » Wed Jul 31, 2019 4:32 pm

Sorry guys. Here’s a picture. The spot is not indented when I run a finger across it.
It seems very superficial. I’m guessing blade is carbon steel, spot is on blade. Not a big deal but if I can remove it, I’m a perfectionist. Thanks

701B0597-BD72-4517-AD80-F0FE278089C2.jpeg
The most useless thing ever is a dull knife.

User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 30407
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: Clean up question?

Postby jerryd6818 » Wed Jul 31, 2019 6:18 pm

Not that I've seen everything but I've never seen anything like this. Start with the lead pencil and see where that takes you. My gut tells me nowhere but it's a fairly benign starting place.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012

KleenCut61
Gold Tier
Gold Tier
Posts: 582
Joined: Thu Mar 23, 2017 2:17 am
Location: Ulster Co, N.Y.
Contact:

Re: Clean up question?

Postby KleenCut61 » Thu Aug 01, 2019 9:31 pm

Looks like a small cluster of tiny pin holes , To make one larger spot , I would hit it with a leather strop wheel and some rough , To get the color back , Leaving the pin holes A-lone ,

User avatar
rea1eye
Posts: 717
Joined: Fri Mar 13, 2015 2:59 am

Re: Clean up question?

Postby rea1eye » Wed Aug 07, 2019 7:50 am

I have something similar on a Case Doctor's Knife (1974). I have tried a lot of things
already mentioned here to no avail. Good luck with yours.

Bob


Return to “Knife Related Q&A”

Who is online

Users browsing this forum: 313 Mike, PvtRossi and 34 guests