Page 1 of 1

1996 Case XX Red Stag R5111 1/2 SS

Posted: Mon Apr 08, 2019 7:33 pm
by joesskankshack
Would anyone be able to help me identify more about this knife? I haven't been able to find it anywhere else online. Thank you!

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Mon Apr 08, 2019 8:16 pm
by royal0014
I would venture a WAG that it was a SFO for Bass Pro Shop ....
8)

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Mon Apr 08, 2019 8:42 pm
by treefarmer
Joe,
I'll agree with Chris, a SFO for Bass Pro. I googled the Case "Cheetah" pattern knives and there were 7 pages of them for sale and I only saw 3 similar to yours, that is ones without the swing guard and the lock. Don't know if that makes them rare or not but 3 out of 350 available tend to make me wonder. ::hmm:: The three similar to yours were 6111 1/2 , none with stag handles, 5111 1/2. Yours is a fine looking knife and I would much rather have one like it than one with with the swing guard and lock, just a simple big jack knife!
Somebody with real knowledge should show up and give you some help, all my babbling is from google and my own opinion. ::facepalm::
Treefarmer

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Mon Apr 08, 2019 11:28 pm
by joesskankshack
treefarmer wrote:Joe,
I'll agree with Chris, a SFO for Bass Pro. I googled the Case "Cheetah" pattern knives and there were 7 pages of them for sale and I only saw 3 similar to yours, that is ones without the swing guard and the lock. Don't know if that makes them rare or not but 3 out of 350 available tend to make me wonder. ::hmm:: The three similar to yours were 6111 1/2 , none with stag handles, 5111 1/2. Yours is a fine looking knife and I would much rather have one like it than one with with the swing guard and lock, just a simple big jack knife!
Somebody with real knowledge should show up and give you some help, all my babbling is from google and my own opinion. ::facepalm::
Treefarmer
Thank you! That is still helpful and gives me more knowledge about the knife. Hopefully, someone else will stumble on the post and have ideas about it.

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Tue Apr 09, 2019 11:13 am
by Sharpnshinyknives
The Red Head on the box is definitely Bass Pro. That is their logo. I would guess and it’s only a guess from years of experience that this being an SFO there were probably at least 500 made. I haven’t seen very many SFO’s done for a lower quantity. There are exceptions, Shepherd Hills had only 100 of each made in ivory back about 8 years ago. But that was special and due to the very limited nature of the handle material.
Given how big Bass Pro is and how big their Case displays are in every store, I wouldn’t be surprised if they had 1000’s made. Not high 1000’s but low 1000’s. You probably don’t see many of these come up for sale because of the low quantity produced and the fact that it’s one of the nicest looking knives most people have ever seen. That one is exceptional.
Hope this helps a bit. Sorry I don’t have any definitive numbers for you on production.
SSk

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Tue Apr 09, 2019 7:25 pm
by joesskankshack
Sharpnshinyknives wrote:The Red Head on the box is definitely Bass Pro. That is their logo. I would guess and it’s only a guess from years of experience that this being an SFO there were probably at least 500 made. I haven’t seen very many SFO’s done for a lower quantity. There are exceptions, Shepherd Hills had only 100 of each made in ivory back about 8 years ago. But that was special and due to the very limited nature of the handle material.
Given how big Bass Pro is and how big their Case displays are in every store, I wouldn’t be surprised if they had 1000’s made. Not high 1000’s but low 1000’s. You probably don’t see many of these come up for sale because of the low quantity produced and the fact that it’s one of the nicest looking knives most people have ever seen. That one is exceptional.
Hope this helps a bit. Sorry I don’t have any definitive numbers for you on production.
SSk
I am looking into selling the knife. Any idea on how much you think it is worth?

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Tue Apr 09, 2019 8:19 pm
by Sharpnshinyknives
joesskankshack wrote:
Sharpnshinyknives wrote:The Red Head on the box is definitely Bass Pro. That is their logo. I would guess and it’s only a guess from years of experience that this being an SFO there were probably at least 500 made. I haven’t seen very many SFO’s done for a lower quantity. There are exceptions, Shepherd Hills had only 100 of each made in ivory back about 8 years ago. But that was special and due to the very limited nature of the handle material.
Given how big Bass Pro is and how big their Case displays are in every store, I wouldn’t be surprised if they had 1000’s made. Not high 1000’s but low 1000’s. You probably don’t see many of these come up for sale because of the low quantity produced and the fact that it’s one of the nicest looking knives most people have ever seen. That one is exceptional.
Hope this helps a bit. Sorry I don’t have any definitive numbers for you on production.
SSk
I am looking into selling the knife. Any idea on how much you think it is worth?
People on here are very reticent to give values. I am too. One would hate to be off by a mile on something like this and that includes myself. But I understand the frustration of trying to figure out value so I will give you my opinion, and you can take it or ignore it. My thoughts when I first saw it was that it was a 100 to 125 dollar knife. I then checked eBay for completed auctions and found one that is from 1996, stag and identical except it didn’t have scrolled bolsters. It sold for 98 dollars and was sold by Silverladdie. He is a big knife seller and his knives get lots of attention and bids. I know that the scrolled bolsters will add another 15 to 25 dollars in value. So my first estimation was correct it’s a 100 to 125 dollar knife.
With that said, eBay takes 10%, Paypal takes 3% more and if you pay to promote your item you will pay another 5 to 10%. So you will clear 75 to 90 dollars depending on what it sells for.
I hope that helps.
I didn’t notice it the first time I looked but it does have a serial number on it and it looks like there are only 3 digits on the knife, so there were probably 500 to 999 made, probably the 500 figure is the number produced. I wonder if they had any other patterns made like that? That would make a nice collection.
SSk

Re: 1996 Case XX Red Stag R5111 1/2 SS

Posted: Tue Apr 09, 2019 9:30 pm
by joesskankshack
Sharpnshinyknives wrote:
joesskankshack wrote:
Sharpnshinyknives wrote:The Red Head on the box is definitely Bass Pro. That is their logo. I would guess and it’s only a guess from years of experience that this being an SFO there were probably at least 500 made. I haven’t seen very many SFO’s done for a lower quantity. There are exceptions, Shepherd Hills had only 100 of each made in ivory back about 8 years ago. But that was special and due to the very limited nature of the handle material.
Given how big Bass Pro is and how big their Case displays are in every store, I wouldn’t be surprised if they had 1000’s made. Not high 1000’s but low 1000’s. You probably don’t see many of these come up for sale because of the low quantity produced and the fact that it’s one of the nicest looking knives most people have ever seen. That one is exceptional.
Hope this helps a bit. Sorry I don’t have any definitive numbers for you on production.
SSk
I am looking into selling the knife. Any idea on how much you think it is worth?
People on here are very reticent to give values. I am too. One would hate to be off by a mile on something like this and that includes myself. But I understand the frustration of trying to figure out value so I will give you my opinion, and you can take it or ignore it. My thoughts when I first saw it was that it was a 100 to 125 dollar knife. I then checked eBay for completed auctions and found one that is from 1996, stag and identical except it didn’t have scrolled bolsters. It sold for 98 dollars and was sold by Silverladdie. He is a big knife seller and his knives get lots of attention and bids. I know that the scrolled bolsters will add another 15 to 25 dollars in value. So my first estimation was correct it’s a 100 to 125 dollar knife.
With that said, eBay takes 10%, Paypal takes 3% more and if you pay to promote your item you will pay another 5 to 10%. So you will clear 75 to 90 dollars depending on what it sells for.
I hope that helps.
I didn’t notice it the first time I looked but it does have a serial number on it and it looks like there are only 3 digits on the knife, so there were probably 500 to 999 made, probably the 500 figure is the number produced. I wonder if they had any other patterns made like that? That would make a nice collection.
SSk
That is very helpful. I have been seeling a bunch of Case knives on eBay so any guidance helps.
It also got me thinking on how rare it is due to it being numbered. Also, not being able to find it anywhere makes it extra tough.