More knives for sale
Posted: Wed Nov 30, 2016 2:15 am
Next list of knives I have for sale, if you need any more pictures please email me and let me know. I will always entertain offers on these so don't be shy and ask if there is something that interests you. My email is [email protected]
Shipping is 7.00 for priority mail but if you buy 2 or more knives shipping is on me. Thanks Mike
Stainless Cutlery 1924-1930? bone handled folding lockback hunter, 4 1/2" closed. Light etch STAINLESS HUNTER on the sabor ground blade. Handles are chip and crack free. Beautiful old Camillus brand knife. Some scratches on the blade that has seen some use but very little. 425
Wahkonsa Cutlery Co bullhead jack, 3 3/4" closed with nice cocobolo or walnut handles not sure which. Blades walk and talk well. Beefy knife and very rare mark. I think it's been lightly cleaned 300
S&M Titusville 3 14/16" closed, great worn groove handles that are chip and crack free. Blades have nice walk and talk but the pen is slower, lightly cleaned. 200
John Primble Inda Steel works, 2 bladed sowbelly, great pattern and the blades seem to have seen little use. There is a crack at the top pin front handle otherwise they are good. Both blades are tight and have good walk and talk but the main a bit slower on the close. 3 3/4" closed 275
Maher Grosh surveyor pattern with screws in the handles and covered backspring. 4 " closed. Blades have some walk and talk still but the spey blade is slow. Letters engraved on 3 of the 4 bolsters. Nice pattern that's a bit hard to find. Knife has been used and blades are down some. 150
The next batch are trappers
John Primble India Steel works, 3 15/16" closed, bone handlestaht appear to be chip and crack free, Blades still have walk and talk although it's been used and the blades are down. 75
John Pritzlaff Hardware Co, 3 15/16" closed, ebony handles are chip and crack free. Blades have very strong walk and talk. Knife was probably made by NYK Co. The etch is still on the bottom of the sabor grind of the main blade. Has seen use and the blades have a great patina to them. 175
E.K. Tryon Co Phila. PA, 4" closed, Bone handles are chip and crack free, blade walks and talks smoothly. Knife I believe has been lightly cleaned and the blade appears about full. 150
WR Case & Sons Bradford Pa, tang stamp is faint but mostly there, 4" closed. Handles are Tortoise Shell but not sure if it's real or not, good chance they are celluloid. Blade is slow and has been used with patina, 175
Next group are all together in the picture of 5 knives. From the Bottom up
Empire dogleg, 3 3/4" closed. Blades walk and talk abit but not strong. Small crack at the middle pin on the back handle. 155
Bayonne Knife Co Bayonne NJ, 3 15/16 closed. No cracks or chips in the handles. Blade has nice walk and talk. Old Iron hardware. 165
Cattaraugus, 4 1/8" closed. Pattern number on the back tang 11049 which is correct for the knife. Blade walks and talks ok. Old Iron hardware. 150
Shapleigh Hardware St Louis, 4 1/2" closed. Bottom pin on the back has crack above and below it. Strong spring. Again old Iron hardware. 175
Remington 5" closed, R1240 on the back tang. No chips or cracks in the handles. Knife has been cleaned and the blade action is abit slow. It does snap on the close but not much. 175
Shipping is 7.00 for priority mail but if you buy 2 or more knives shipping is on me. Thanks Mike
Stainless Cutlery 1924-1930? bone handled folding lockback hunter, 4 1/2" closed. Light etch STAINLESS HUNTER on the sabor ground blade. Handles are chip and crack free. Beautiful old Camillus brand knife. Some scratches on the blade that has seen some use but very little. 425
Wahkonsa Cutlery Co bullhead jack, 3 3/4" closed with nice cocobolo or walnut handles not sure which. Blades walk and talk well. Beefy knife and very rare mark. I think it's been lightly cleaned 300
S&M Titusville 3 14/16" closed, great worn groove handles that are chip and crack free. Blades have nice walk and talk but the pen is slower, lightly cleaned. 200
John Primble Inda Steel works, 2 bladed sowbelly, great pattern and the blades seem to have seen little use. There is a crack at the top pin front handle otherwise they are good. Both blades are tight and have good walk and talk but the main a bit slower on the close. 3 3/4" closed 275
Maher Grosh surveyor pattern with screws in the handles and covered backspring. 4 " closed. Blades have some walk and talk still but the spey blade is slow. Letters engraved on 3 of the 4 bolsters. Nice pattern that's a bit hard to find. Knife has been used and blades are down some. 150
The next batch are trappers
John Primble India Steel works, 3 15/16" closed, bone handlestaht appear to be chip and crack free, Blades still have walk and talk although it's been used and the blades are down. 75
John Pritzlaff Hardware Co, 3 15/16" closed, ebony handles are chip and crack free. Blades have very strong walk and talk. Knife was probably made by NYK Co. The etch is still on the bottom of the sabor grind of the main blade. Has seen use and the blades have a great patina to them. 175
E.K. Tryon Co Phila. PA, 4" closed, Bone handles are chip and crack free, blade walks and talks smoothly. Knife I believe has been lightly cleaned and the blade appears about full. 150
WR Case & Sons Bradford Pa, tang stamp is faint but mostly there, 4" closed. Handles are Tortoise Shell but not sure if it's real or not, good chance they are celluloid. Blade is slow and has been used with patina, 175
Next group are all together in the picture of 5 knives. From the Bottom up
Empire dogleg, 3 3/4" closed. Blades walk and talk abit but not strong. Small crack at the middle pin on the back handle. 155
Bayonne Knife Co Bayonne NJ, 3 15/16 closed. No cracks or chips in the handles. Blade has nice walk and talk. Old Iron hardware. 165
Cattaraugus, 4 1/8" closed. Pattern number on the back tang 11049 which is correct for the knife. Blade walks and talks ok. Old Iron hardware. 150
Shapleigh Hardware St Louis, 4 1/2" closed. Bottom pin on the back has crack above and below it. Strong spring. Again old Iron hardware. 175
Remington 5" closed, R1240 on the back tang. No chips or cracks in the handles. Knife has been cleaned and the blade action is abit slow. It does snap on the close but not much. 175