Page 1 of 1
Masonic knife
Posted: Wed Nov 02, 2016 12:58 pm
by mrwatch
Any Masons here? As a Past Master I and considering a knife with the emblem and such possibly with my name. Typically most are Chinese made and low quality. A quick web search shows that Case and a few other's do or did make logo knives. It could be a folder or even a fixed blade I can put in a frame for my wall. Hopefully under $100-150. If I frame it I will have a tag made to put with it.
Thank's Bob
Re: Masonic knife
Posted: Wed Nov 02, 2016 1:14 pm
by peanut740
I've done a little traveling myself. Watch ebay.Old Masonic knives show up fairly often.Some high quality made ones in pearl that are mint some up if you are patient.

Re: Masonic knife
Posted: Wed Nov 02, 2016 6:22 pm
by RobesonsRme.com
You don't, by any chance, live in Canton, Ohio, do you?
Charlie Noyes
Re: Masonic knife
Posted: Wed Nov 02, 2016 10:05 pm
by jerryd6818
A large selection of Masonic knives here, all kinds of prices from low to medium and on up:
https://www.google.com/search?q=masonic ... Dj0QsxgIGw
Google is your friend.
Re: Masonic knife
Posted: Thu Nov 03, 2016 1:23 pm
by mrwatch
You don't, by any chance, live in Canton, Ohio, do you? Charlie Noyes
No but my father was born there I think 1907. Fennville, Michigan I prefer new because of my 3 years as Master of the lodge. I did check Google and see Case and Frost, possibly one of our own here can make new scales or a design to their own or I can supply it for a mod. Bob
Re: Masonic knife
Posted: Sat Nov 05, 2016 3:32 am
by RobesonsRme.com
A Robeson, but it's from "Camden" not Canton. My error.
Circa 1912.
Re: Masonic knife
Posted: Fri Nov 18, 2016 2:52 am
by Beechtree
Beautiful knife Charlie!!!
Bob, the company Voos, of New Haven, made quite a few masonic pen knives with pretty cloisonné enamel handles. Ebay might be your best bet, It might take time to find one that best suits you but that just adds to the fun

Re: Masonic knife
Posted: Fri Nov 18, 2016 3:05 am
by DRM60
I have traveled as well. I have a couple of the Case Masonic knives. Blue jigged bone Full size trapper and blue smooth bone mini trapper. Very much like them both. Congo Lodge #743. Benton, Arkansas.
Re: Masonic knife
Posted: Fri Jul 12, 2024 7:12 pm
by OLDE CUTLER
I resurrected this old thread to show this recently acquired Masonic pocket knife, It is 3 and 1/8 inch overall closed, 4 blade (1 broken), aluminum handled, and has a bail. Tang stamp is Curley Cutlery Co New York. The file blade is marked Curley's pat Dec 8-85. Engraved onto the aluminum handle is the Masonic Logo with the number 610 which I assumed meant that it was lodge #610. However when one goes to look up where lodge #610 is located, it could be in any of 6 places including, Alabama, Kentucky, Tennessee, Missouri, Mississippi, or Ohio ??????? There is also what may be the year, 1912. Goings has the Curley Cutlery Co in business during 1902-1903. So maybe that is not the year either. Was there actually a Curley Cutlery Co, or was this made by another of the well known New York companies?
Re: Masonic knife
Posted: Fri Jul 12, 2024 8:23 pm
by New_Windsor_NY
I checked my 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
All I could find was "Curley Bros. New York c 1885-1905"
Related to Curley Cutlery Company?

Re: Masonic knife
Posted: Sat Jul 13, 2024 12:06 am
by knife7knut
Here are a couple that l own. The key knife is a . J. C. & . N. Co.; the pearl is unmarked as are the 2 daggers. Not sure what the medal is. My dad was a 32nd degree grand poobah or something like that. He retired long before we met. Long story.
Re: Masonic knife
Posted: Sat Jul 13, 2024 12:53 am
by Reverand
I do not know about the manufacture.
I know several Masons, though I never joined, and if I understand correctly the Lodge number is different in each state.
Lodge #610 would literally be the 610th Lodge to open in that state. It could be any of the 6 that you listed, or it might be in another state and have closed down over the years and no longer be active.
Re: Masonic knife
Posted: Sat Jul 13, 2024 12:51 pm
by OLDE CUTLER
Reverand wrote: ↑Sat Jul 13, 2024 12:53 am
I do not know about the manufacture.
I know several Masons, though I never joined, and if I understand correctly the Lodge number is different in each state.
Lodge #610 would literally be the 610th Lodge to open in that state. It could be any of the 6 that you listed, or it might be in another state and have closed down over the years and no longer be active.
Interesting, thanks for the info. I am taking the 1912 to be the year. Or maybe not?
Re: Masonic knife
Posted: Sat Jul 13, 2024 1:15 pm
by New_Windsor_NY
Not too recently, my visit to the post office produced this lobster or gentlemans' pattern or style of pocket knife. It now becomes my first example to be posted under this topic or thread. It also became the latest example to be added to my general, pocket knife accumulation. It is an ORANGE CUTLERY COMPANY, one blade, one tool (a file with a blade tip), two tang stamps, 3" closed, lobster or gentlemans', pattern or style of pocket knife. The main blade front tang stamp says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The tool back stamp also says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The main handle side has a MASONIC symbol, logo or emblem. The main blade has a SOFT half stop, a GOOD opening snap and a GOOD closing snap. The tool also has a SOFT half stop, but it does have a GOOD opening snap and a GOOD closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Masonic knife
Posted: Sun Sep 22, 2024 12:00 am
by New_Windsor_NY
This morning, my trip to the post office produced this lobster or gentlemans', pattern or style of pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the most recent example to be added to my general, pocket knife accumulation. It is an ORANGE CUTLERY COMPANY, one blade, one tool (a file with a blade tip), two tang stamps, 3" closed, lobster or gentlemans', pattern or style of pocket knife. The main blade front tang stamp says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The tool back tang stamp also says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The main handle side has a MASONIC symbol, logo, or emblem, with "Jr. O. U. A. M." (Junior Order of United American Mechanics). The main blade does NOT have a half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The tool does NOT have a half stop. The tool does NOT have an opening snap. The tool does have an OK closing snap. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Masonic knife
Posted: Sun Mar 23, 2025 8:30 am
by New_Windsor_NY
A couple of days ago, my visit to the post office produced this lobster or gentlemans', pattern or style of pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my general, pocket knife accumulation. It is an ORANGE CUTLERY COMPANY, one blade, one tool (a file with a blade tip), two tang stamps, 3" closed, lobster or gentlemans', pattern or style of pocket knife. The main blade front tang stamp says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The tool back tang stamp also says, "ORANGE (over) CUT. CO. (over) WALDEN, N.Y." The main handle side has an applied MASONIC symbol, logo, or emblem, with "JrO UAM" (Junior Order of United American Mechanics). This is my third Masonic, ORANGE CUTLERY COMPANY pocket knife. My other two Masonic, ORANGE CUTLERY COMPANY pocket knives, were both previously posted under this topic or thread. The main blade does have a SOFT half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The tool does have a SOFT half stop. The tool does have a GOOD opening snap. The tool does have a VERY GOOD closing snap. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT require any cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
AAPK member lt632ret (R.I.P.), wrote a short article regarding ORANGE CUTLERY COMPANY and included pictures of
three tang stamps and four different ORANGE CUTLERY COMPANY pocket knives. The article and the pictures
can be found in his book, "Knives of the Hudson Valley - 160 Years of American Cutlery History"
The whole book is a VERY INTERESTING and VERY INFORMATIVE read.
Re: Masonic knife
Posted: Sun Mar 23, 2025 12:19 pm
by wlf
Thanks Skip.
I'm going to try and find a copy, I called Richard every few years, trying to get him to sell me his farmers jacks. I think our next to the last conversation was when he sold a Schrade forever calendar knife on eBay.