Page 1 of 1

Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 2:03 am
by orvet
Sometime ago Wade (Colonel26) sent me what was left of a Case 6217 (loom fixer) for restoration.
As usual I for got to take before pics so here are the pieces after I took it apart.
The knife consisted of all the pieces you see here, there were no handles, just the liners and someone had pinned the rocker pin with brass and hammered it down flat and drilled a lanyard hole in the liners and springs.
Wades Case loom fixer a.jpg
In this pic you can see a slab of hickory wood that I used for the handles. The wood was cut by Wade's granddad for his smokehouse. Wade can fill y'all in on the details of the story.
Wades Case loom fixer -in pieces with hickory wood.jpg
There were some heavy scratches in the liners that would not come out with polishing.
Wades Case loom fixer scratches in liners.jpg
So I started with 400 grit sandpaper and worked my way up to 3500 grit then polished the liners.
Not perfect but a vast improvement.
Wades Case loom fixer scratches removed- sanded to 3500 & polished.jpg
The hickory wood did not have a great deal of color so I added some Golden Pecan wood stain to it before finishing it with tung oil. I chose tung oil because it is supposed to harden the surface of the wood it is applied to. While hickory is hard, it is still al relative soft wood when compared to ebony, cocobolo and some others.
stains copy.jpg

Here is what it looks like now -
Case 6217 e.jpg
Case 6217 f.jpg
Case 6217 a.jpg
Case 6217 b.jpg
Case 6217 d.jpg
There was a lot of work on the blades to reshape the master to remove most of the curve in it and I had to reprofiled the very tip of the pen blade to get it to set below the liners and in the pocket.
This old knife had been used hard and put away wet, but I think it will give Wade a lifetime of good service. ::nod::

Hope y'all enjoy the pics.

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 2:21 am
by Colonel26
I can't wait to get hold of it!

I bought the knife with no scales off eBay for $5 + shipping. It's a 10 dot and I figured surely it could be made into treasure.

A year ago when grandma died I moved the old smokehouse to my place. In it was a pile of hickory that my pa, who passed in 1999) had cut and stacked in there years ago. He always raised hogs and made country ham, sausage, middlin' meat etc... It was all salt cured and hickory smoked with wood that he cut off the farm. The last hog killing I remember would have been sometime in the late 80's. So this wood has been in the smokehouse since then.

Now, not only can I pack one of my favorite patterns, but something of Pa's too.

Thanks Dale! It's beautiful!

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 2:25 am
by FRJ
I love this stuff. I find all the pictures very interesting. Good job Dale.

You've got a nice personal knife there, Wade.

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 2:38 am
by philco
Great work Dale. That knife looks super!

Wade you've got yourself a treasure there my friend. ::tu::

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 3:32 am
by #goldpan
As always! ::tu:: ::tu:: Dale! Wade what a knife! :shock: A good old one for the pocket and a hell of a story to with it.

Randy

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 3:34 am
by Colonel26
Thanks Phil, Randy, and Joe. This one is going to see lots of pocket time. I'm excited to see what the scales are going to look like with some pocket time.

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 4:20 am
by 313 Mike
Great knife, great story, thanks for sharing guys, and Wade congrats on a fantastic new old knife!

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 6:42 am
by TripleF
313 Mike wrote:Great knife, great story, thanks for sharing guys, and Wade congrats on a fantastic new old knife!

DITTO!!! ::nod:: ::nod::

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 6:48 am
by royal0014
Man that is some kinda purty !
Gives me ideas ...


Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 12:53 pm
by glennbad
The story itself is great, and then for Dale to wrap that all up in that knife is just icing on the cake.

What a great looking knife, what a treasure!!!

Great work, Dale! I think you captured what Wade was looking for there. ::tu::

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 1:42 pm
by Colonel26
Thanks guys. The knives that Glenn, Dale, and Bob have fixed up for me are among the ones I treasure most. This one will fit right in!

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 3:05 pm
by zp4ja
Great job Dale!

Congrats on a great and sentimental carry Wade. I really enjoy things such as this myself. Great to see a piece of family in your hand every time you pull her out.

Jerry

Re: Case Loom Fixer restoration

Posted: Mon Jul 20, 2015 5:01 pm
by ScoutKnives
Awesome ...............

Re: Case Loom Fixer restoration

Posted: Tue Jul 21, 2015 12:35 am
by 1967redrider
Great looking knife and story, Dale & Colonel. ::nod::

Re: Case Loom Fixer restoration

Posted: Tue Jul 21, 2015 2:07 am
by orvet
I am glad you are happy with it Wade. It should be there in a couple days.
Thanks to all you for your encouragement & nice words.