Flylock Switch blade knife question
Posted: Mon Jan 05, 2015 2:53 am
I am in possession of a Flylock two blade switch knife that I need help in identifying. I know little about knives other than they can cut you, so please excuse my terminology in my description.
The knife is 3.5" closed. The blades are 1.5" & 2"long. The case is black and could be bone or similar material. There are three small rivets or pins (one on each end & one on the top center) holding every together. The blades look like stainless steel, but I question that since there is some stain or tarnish on each surface of the large blade & a slight amount of rust on the top edge of each blade. One side of the large blade shows marks as though it was polished during manufacture. No such marks are visible on the small blade.
The end of the large blade closest to the knife enclosure has the following etchings: Side 1 "Flylock REC US PAT OFF"; Side 2 "THE FLYLOCK KNIFE CO. B'PORT CONN".The small blade has the following: Side 1 "US Pat MARCH 5, 1918" Side 2 " REG (not legible) US PAT 3,5.18
I need model, mfg year, market value & any other such info.
The knife is 3.5" closed. The blades are 1.5" & 2"long. The case is black and could be bone or similar material. There are three small rivets or pins (one on each end & one on the top center) holding every together. The blades look like stainless steel, but I question that since there is some stain or tarnish on each surface of the large blade & a slight amount of rust on the top edge of each blade. One side of the large blade shows marks as though it was polished during manufacture. No such marks are visible on the small blade.
The end of the large blade closest to the knife enclosure has the following etchings: Side 1 "Flylock REC US PAT OFF"; Side 2 "THE FLYLOCK KNIFE CO. B'PORT CONN".The small blade has the following: Side 1 "US Pat MARCH 5, 1918" Side 2 " REG (not legible) US PAT 3,5.18
I need model, mfg year, market value & any other such info.