All About Pocket Knives

I need to fill a couple holes on an old Flylock switch.

The handles are hard black rubber, I need an epoxy or filler that is hard and black in color to match. The only thing I could find for color was grey, white and clear at the hardware store.

Any suggestions on what to use?, and I don`t want something that will react with the original handle material and cause any damage. Can I use a clear and add some kind of color dye?

Thanks

Dimitri, would lamp black affect the epoxy?

http://www.amazon.com/Devcon-62345-Stre ... B000KE0T3O

IM

experiment with mixing black paint with it.
try a small amount first on some cardboard to see if it effects the glue from drying.
I've used all different colors of paint with epoxy and it works.

JW~

https://www.siliconedepot.com/silicone- ... ails&id=31

use clear acrylic resin and add dye. hobby lobby sells both

Or epoxy with toner from a laser printer cartridge mixed in. I do this a lot to fill cracks and bug holes when working with mesquite and similar woods.

This is what I have use on Schrades black derlin and Prestos black wormgroove with excellent results . http://www.kent-automotive.com/kent/Sup ... KT14676.ka