Page 4 of 8
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Aug 23, 2018 4:54 pm
by FRJ
Here is that unique pattern that Lee showed. Well used main blade. Jigged bone. 2 3/8" closed.
Mine is Lakeville, Ct. and not the Salisbury stamp.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Aug 23, 2018 4:58 pm
by doglegg
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Aug 23, 2018 8:48 pm
by LongBlade
Joe - A few more nice looking Holley knives Joe

... The jacks are sweet-looking nice knives but the jigged bone on the Norfolk pattern is awesome

- I've seen that pattern using multiple handles like MOP, horn (as the one I posted) and ebony but never have seen a bone one like that beauty

... and thanks for the congrats Joe

...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Aug 23, 2018 9:40 pm
by BWT
Very nice Joe, really enjoyed looking at those handles!!!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Aug 23, 2018 11:08 pm
by FRJ
Thanks guys, it is a little beauty and to think it has endured some probable light but considerable work and sharpening on that main blade, which started life as a Wharncliffe, and not one crack in those covers. Remarkable.
Thanks for looking.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Aug 24, 2018 2:20 pm
by danno50
Very beautiful and unique little knife, Joe!

Fantastic old bone!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Aug 24, 2018 2:55 pm
by FRJ
Thank you, Dan.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Mar 08, 2019 2:55 pm
by KAW
My first Holley (been on the hunt for one for about a year now!)... the little brother to
Joe's jack on the previous page (and not in as good condition as his)... at 3⅛" with wood handles, but no shield (I need to learn to tell the different kind of woods... ebony, cocobolo, rosewood, etc...).
Previous owner definitely favored the pen blade... but both blades at stamped HOLLEY / Lakeville / Conn
Would like to know when it dates to if possible... especially if before or after 1900?

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Mar 08, 2019 11:13 pm
by LongBlade
Nice score Ken

... Hard to date based on that tang stamp as that one is often seen - can be +/- 1900 is a safe bet

- There were a few very early stamps from when they started out in the 1840s that help date but not this one...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Mar 09, 2019 12:39 am
by Colonel26
Real nice guys.
Joe that one of yours is something else. Wow.
I only have one Holley, only one I’ve ever seen in these parts. They sure do seem to be top notch knives.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Mar 09, 2019 12:43 am
by KAW
Thanks Lee... I haven't had time to go through this whole thread yet... but I saw mention of a Lakeville vs Salisbury stamp at the top of the page. Was wondering if that might help with the dating?
[Edit] Looking just like Joe's knife on page 4... I guess this one would be classified as a Boys Knife...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sun Mar 10, 2019 5:06 pm
by LongBlade
Ken - The Salisbury stamp is very early and also very rare - I believe the Salisbury stamp was mid 1840s at the start and their first location - I’ve only seen one in the same pattern Joe showed above in an eBay auction and the final price was “crazy” imo... the great majority of others are Lakeville but that was indeed their location for a very long time...
Though I posted this Holley Hawkbill in the Horticultural thread it belongs here as well.. Pick bone handles, grooved bolster, brass end cap, still hard snapping and 4 & 3/8” closed.... Tang stamp worn but figured it out and story behind that is in Horticultural thread...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sun Mar 10, 2019 8:03 pm
by danno50
Nice Holley, Ken!

Great find on that bone handled Holley pruner, Lee!

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sun Mar 10, 2019 8:58 pm
by LongBlade
Thanks very much Dan

..
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Mon Mar 11, 2019 1:26 am
by FRJ
A very nice Holley, Ken.
Lee, that is a grand old knife.
Thanks for showing them here guys.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Mon Mar 11, 2019 11:50 am
by BWT
Beautiful knife Lee,love the handles!!! Ken that’s a really nice Holley,thanks for sharing.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Mon Mar 11, 2019 8:09 pm
by LongBlade
Thanks Bill

...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Mar 13, 2019 3:05 am
by Duffer
Here is the only Holley I have. I may have posted this on AAPK already but can’t remember where. I checked this thread and could not find it but it does belong on here. This is a Holley Jack Knife with handles of Ebony or perhaps Cocobolo or Rose Wood. Don’t know for sure other than it is very dense and black on the mark side with lateral graining and the pile side has some discernible dark reddish streaks with more vertical graining. It is 3.75 inches closed. Very high level of craftsmanship and fit with both blades flush at close, half and full open positions. Excellent W & T. Primary spear blade tang four line address HOLLEY/MAN’FC. CO/LAKEVILLE/CONN. Small pen blade tang marked HOLLEY/MFC CO/LAKEVILLE/CONN.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Mar 13, 2019 4:52 am
by FRJ
This is a beautiful knife, Lloyd.
I'm so glad you put it in this thread. Thank you.
What a great length for what appears to be kind of slender knife.
Perfect for eating an apple you might say.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Mar 13, 2019 7:34 am
by Duffer
Hey thanks Joe—appreciate the nice comments

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Mar 13, 2019 11:44 am
by peanut740
Lloyd

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Mar 13, 2019 1:30 pm
by LongBlade
That’s a stunner Lloyd

... the shield is very cool

..
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Mar 14, 2019 1:25 am
by danno50
Very nice, Lloyd!

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Mar 14, 2019 3:33 am
by Duffer
Thank you kindly Roger, Lee and Dan!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Mar 14, 2019 11:27 am
by djknife13
Lloyd, if you only have one you might as well make it a really nice one. Good work. ____Dave