All About Pocket Knives

Posted: **Fri Apr 13, 2018 7:11 pm**

Thanks, but I didn't take it apart, I want to eventually. I did this one by hand, I would think if I could have taken it apart the way to go would be maybe a belt sander??? I just wanted to rescue it, the previous owner was never going to do anything with it.

Posted: **Fri Apr 13, 2018 10:22 pm**

The old sayin' "The early bird gets the worm" must be true. I waited till Miss Joy had her physical therapy at 10:30 to check on the big Flea Across Florida yard sale. Lots of junk, China cheapies around. One old feller had a pile of decent knives all with either broken or missing blade, priced way too high. He asked me if I knew a certain man? I said, "Yes sir, I know him." He says, "Well he bought all the good ones about 6:30 this mornin'!"

He had a pile of $1 knives and I found a little wooden handled A.W. Wadsworth. The blade looks like it was bead blasted.

One guy had all the new China plastic handled zombie killers and I asked him about a good knives? He said he had a Case in his car that he would sell. So we walk to the car and he shows me a 3207CV that needs cleaning, don't think it has been sharpened, $10. Then at another Zombie killer supply table I saw a little knife in a pile of old hand tools. It was a complete mess but it had a Case Tested stamp. The handles had outgassed and the spring was broken from the outgassing and the blade had been tipped. The man say's, "Would you give me a dollar for it?" I told him, "No, you ought to give it to me to get it out of your sight!" He handed me the knife and grinned. It is a Case Tested, probably a 31024 1/2. Under the rust in places there is still bright metal, no patina, probably tipped and laid to rest in a drawer many moons ago. Also saw a Bulldog congress that was totally destroyed by outgassing, the owner had the original box and it had deteriorated without him knowing what was happening.
Treefarmer

: Mark side

: Pile side The little Case is just plain sad!

Posted: **Fri Apr 13, 2018 11:03 pm**

Ya get Good Days and Bad Days Treefarmer , There Something to look At Anyhoot

My Wallkill ..K.C. Zombie Killer Supply Table

Posted: **Sat Apr 14, 2018 1:44 am**

Early German Peters...Early today I shopped an estate sale.... these things are usually overpriced and sure enough there was a Keen Kutter with broken blade for 16$ then a banged up Henckels with broken scales and missing pieces for 42$. Maybe I need to lower expectations..... I picked up a pearl handles knife that looked intack and both blades looked full but they were frozen shut and there was black and green paint ....dont know why but I paid the few dollars for it and brought it home. The pictures tell the rest. I had found a Peters knife stamped both blades and very nice afterall. I know it is old (1876-86?) but was surprised when I checked on ebay and found one listed at 100$??? Are they really that valuable or is this seller just fishing??? Thanks for any help...

Posted: **Sat Apr 14, 2018 11:41 am**

treefarmer wrote:The old sayin' "The early bird gets the worm" must be true. I waited till Miss Joy had her physical therapy at 10:30 to check on the big Flea Across Florida yard sale. Lots of junk, China cheapies around. One old feller had a pile of decent knives all with either broken or missing blade, priced way too high. He asked me if I knew a certain man? I said, "Yes sir, I know him." He says, "Well he bought all the good ones about 6:30 this mornin'!"
He had a pile of $1 knives and I found a little wooden handled A.W. Wadsworth. The blade looks like it was bead blasted.
One guy had all the new China plastic handled zombie killers and I asked him about a good knives? He said he had a Case in his car that he would sell. So we walk to the car and he shows me a 3207CV that needs cleaning, don't think it has been sharpened, $10. Then at another Zombie killer supply table I saw a little knife in a pile of old hand tools. It was a complete mess but it had a Case Tested stamp. The handles had outgassed and the spring was broken from the outgassing and the blade had been tipped. The man say's, "Would you give me a dollar for it?" I told him, "No, you ought to give it to me to get it out of your sight!" He handed me the knife and grinned. It is a Case Tested, probably a 31024 1/2. Under the rust in places there is still bright metal, no patina, probably tipped and laid to rest in a drawer many moons ago. Also saw a Bulldog congress that was totally destroyed by outgassing, the owner had the original box and it had deteriorated without him knowing what was happening.
TreefarmerDSCN4510.JPGDSCN4511.JPG

Treefarmer, you have three good project knives there. I'm not a knife mechanic but I hope to disassemble a knife soon. I just bought a book on repairing knives and am looking forward to giving it a try,as soon as I purchase some tools, along with the info here on AAPK. I don't know if I would try it again after just finishing the one I just posted without a belt sander. I can say that I got a lot of satisfaction after it was over. I don't know if it is like cancer or not after the knife begins to corrode and is removed from the outgassing knife if it keeps rusting more? The top quarter inch of the master blade was so pitted I almost gave up. I did have a Dremel tool to help with the springs.

Posted: **Sat Apr 14, 2018 12:39 pm**

Bill,
The Mini-Trapper cleaned up fairly well, not as polished as your pretty Coutel, but cleaned off the rust and something that was stuck to the clip blade, it actually chipped off with a dental pick.

Tuned up the edges with ceramic sticks and a strop, good to go.
The little wooden handled A.W. Wadsworth sharpened up very well, had to reset the kick, the point of the blade was way too high and by the way, that one has quite a strong spring, like the old Queen City that I made friends with a week or so back! The A.W.W. even has half stops.
Now the little Case Tested is a real mess, the back spring is broken, if I could find a spring it would definitely become a real project. I suppose I need to remove the outgassed handles if I intend to do any thing with it.
Treefarmer

Posted: **Sat Apr 14, 2018 9:41 pm**

I found quite a few knives last weekend at the OKCA show. I posted some Schrades the Schrade forum but that was probably less than half the number of knives that I got, especially since I keep finding more. I found a whole bunch of project knives and a Buck 120 that I bought a couple of days ago and I had completely forgotten about them. I guess I'm not as organized packing up to go to a show and then packing up and coming home. I think Ray (Paladin) must be a little more organized than I am, if only because he sold me a whole bunch of parts knives and project knives so he didn't have to tote them back to Texas! Thanks Ray!

This is most of the Schrade product got at the show. The third picture is more of a group shot.

The attachment Schrade fixed blades - 2018 OKCA show.jpg is no longer available

The attachment Imperial Schrade foldders from the 2018 OKCA show.jpg is no longer available

The attachment Schrade Tough Grips & Tough Tool.jpg is no longer available

The attachment More Imperial Schrade products.jpg is no longer available

I picked up a few Gerbers:

A few from Camillus:

Here are some assorted knives that I put all in one group picture:

A couple more fixed blades:

Of course I got the 2018 OKCA club knife. So far I think this is my favorite GEC pattern it doesn't have a super strong spring and it which my hands really appreciate it!

This little beauty right here is the new TC Barlow with soup bone handles.
25 were made, 7 with long pull and 18 with nail nick.

I will have to do a second post to add more pictures.

Posted: **Sat Apr 14, 2018 9:48 pm**

The first batch a project and parts knives:

The second batch of projects/parts knives:

The elusive Buck 120:

This is a Soquel River Lev-R-Lok, new old stock in the box with paper work:

I think that's most all of the knives I got, though I did get some supplies as well.
I hope you enjoy the pictures.

Posted: **Sat Apr 14, 2018 11:02 pm**

orvet wrote:The first batch a project and parts knives:
Projects from the 2018 OKCA show.jpg

The second batch of projects/parts knives:
second batch of project knives.jpg

The elusive Buck 120:
Buck 120 a.jpg

This is a Soquel River Lev-R-Lok, new old stock in the box with paper work:
Soque River Knives Lev-R-Lok a.jpg

I think that's most all of the knives I got, though I did get some supplies as well.
I hope you enjoy the pictures.

Good photos and I recognize several of those! Even the ornate nail clippers.

It was a great show and a great time!

Rasy

Posted: **Sat Apr 14, 2018 11:08 pm**

orvet wrote:I found quite a few knives last weekend at the OKCA show. I posted some Schrades the Schrade forum but that was probably less than half the number of knives that I got, especially since I keep finding more. I found a whole bunch of project knives and a Buck 120 that I bought a couple of days ago and I had completely forgotten about them. I guess I'm not as organized packing up to go to a show and then packing up and coming home. I think Ray (Paladin) must be a little more organized than I am, if only because he sold me a whole bunch of parts knives and project knives so he didn't have to tote them back to Texas! Thanks Ray!

This is most of the Schrade product got at the show. The third picture is more of a group shot.
Schrade fixed blades - 2018 OKCA show.jpg
Imperial Schrade foldders from the 2018 OKCA show.jpg
Schrade Tough Grips & Tough Tool.jpg
More Imperial Schrade products.jpg

I picked up a few Gerbers:
Gerbers from the 2018 OKCA Show.jpg

A few from Camillus:
Camillus knives from 2018 OKCA show.jpg

Here are some assorted knives that I put all in one group picture:
Assorted knives from OKCA 2018.jpg

A couple more fixed blades:
2 Fixed blades from the 2018 OKCA show.jpg

Of course I got the 2018 OKCA club knife. So far I think this is my favorite GEC pattern it doesn't have a super strong spring and it which my hands really appreciate it!
OKCA 2018 Club Knife b.jpg

This little beauty right here is the new TC Barlow with soup bone handles.
25 were made, 7 with long pull and 18 with nail nick.
TC Soup Bone Barlow b.jpg
TC Soup Bone Barlow c.jpg

I will have to do a second post to add more pictures.

I did enjoy the pictures. Can't wait to see the after pictures. That club knife is a good one.

Posted: **Sat Apr 14, 2018 11:10 pm**

Wow Dale!, that is quite a haul. I really like the Schrade 2OT1

Posted: **Sat Apr 14, 2018 11:41 pm**

Dale that is quite a haul. I have an interest in that white handled scout. Kindly keep me in mind when you are finished with it. Thanks.

Posted: **Sun Apr 15, 2018 12:40 am**

orvet wrote:The first batch a project and parts knives:
Projects from the 2018 OKCA show.jpg

The second batch of projects/parts knives:
second batch of project knives.jpg

The elusive Buck 120:
Buck 120 a.jpg

This is a Soquel River Lev-R-Lok, new old stock in the box with paper work:
Soque River Knives Lev-R-Lok a.jpg

I think that's most all of the knives I got, though I did get some supplies as well.
I hope you enjoy the pictures.

Great haul, Dale. Appreciate the pics.
Look forward to seeing some projects posted up.

Posted: **Sun Apr 15, 2018 9:42 pm**

Man Dale, that is quite the hoard! You cleaned up.

Posted: **Sun Apr 15, 2018 10:07 pm**

Thanks guys, I'm glad you enjoyed the pictures. Now I have to get busy and list them all in my store.

Posted: **Wed Apr 18, 2018 4:41 pm**

Daaaaaaaaaaaaaaaaaaaaaaang.....no wonder I can't find any knives!! Knice haul Dale!!

I did find a few from local pawn shops (thankfully Dale doesn't come out this way).

Posted: **Wed Apr 18, 2018 5:48 pm**

That BK-2 looks like it has never been used for anything but to sit in a drawer.

Posted: **Wed Apr 18, 2018 5:54 pm**

zzyzzogeton wrote:That BK-2 looks like it has never been used for anything but to sit in a drawer.

I believe you're correct....not a scratch on it...

Posted: **Wed Apr 18, 2018 7:51 pm**

TripleF wrote:Daaaaaaaaaaaaaaaaaaaaaaang.....no wonder I can't find any knives!! Knice haul Dale!!

I did find a few from local pawn shops (thankfully Dale doesn't come out this way).

That Kershaw is the one over in knife photography isn't it. Nice knife.

Posted: **Wed Apr 18, 2018 8:51 pm**

doglegg wrote:
TripleF wrote:Daaaaaaaaaaaaaaaaaaaaaaang.....no wonder I can't find any knives!! Knice haul Dale!!

I did find a few from local pawn shops (thankfully Dale doesn't come out this way).
That Kershaw is the one over in knife photography isn't it. Nice knife.

Indeed. Thank you!

Posted: **Fri Apr 20, 2018 10:43 am**

[quote="orvet"]I found quite a few knives last weekend at the OKCA show. I posted some Schrades the Schrade forum but that was probably less than half the number of knives that I got, especially since I keep finding more. I found a whole bunch of project knives and a Buck 120 that I bought a couple of days ago and I had completely forgotten about them. I guess I'm not as organized packing up to go to a show and then packing up and coming home. I think Ray (Paladin) must be a little more organized than I am, if only because he sold me a whole bunch of parts knives and project knives so he didn't have to tote them back to Texas! Thanks Ray!

I picked up a few Gerbers:
Gerbers from the 2018 OKCA Show.jpg

Hi- I'll take that Gerber Classic when you're putting it up for sale.

Posted: **Fri Apr 20, 2018 2:29 pm**

Yesterday we went antique shopping.
Queen #15 Winterbottom Bone Half Congress Queen Steel Tang Stamp No Etch - 1957-1960. Looks like the blades were highly buffed.

Per a net listing.
NEW BROWNING WHITETAIL TRIBUTE COLLECTOR SERIES FIXED BLADE KNIFE -BURL WOOD
a beauty from Browning. A Limited Edition Whitetail Collector Series hunter, with 2-3/4" Drop Point blade ground from tough 5CR Stainless Steel. Figured Burl wood handle scales with Stainless Bolsters and Pins with Lanyard opening. Full tang design is 7" long and comes in a Black lacquered solid wood display box. Note=not my pictures. Hope that is okay? Need the year and possibly the production numbers.

Posted: **Fri Apr 20, 2018 2:30 pm**

one more,

Posted: **Fri Apr 20, 2018 2:38 pm**

Love the burl wood handle. Awfully nice looking knife. The fellow over at Deepwoods Ventures, who makes carving knives, makes beautiful burl wood handles. And that box adds to it as well.

Posted: **Fri Apr 20, 2018 8:26 pm**

Very nice, beautiful!!!

All About Pocket Knives

KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY

Re: KNIFE FINDS OF THE DAY