All About Pocket Knives

..if I could just have the one my grandpa carried(camillus,true, split spring,rogers bone) I would be happy as a pig in slop!!!!.......... .............

Picked up a clone, a variation and an almost out of the bay. The Craftsman has an Imperial tang stamp making it a clone, the Moor Man's is a 72 Yello Jaket marked 72 but with a Moor Man's shield and the Rite Edge is almost a clone but.....

Rite Edge pics.

.....all 3 of those are great finds!!!!........... ...................................

doglegg wrote: ↑Fri Sep 25, 2020 7:56 pm Picked up.....

VERY nice acquisitions Floyd!
I have the same, exact, Rite Edge. It too has the box. I removed it from my "72" variation collection because it actually has more of a stockman, "serpentine" shape to it than a "swelled center" shape. It also measures just slightly short of 3 5/8" closed.You can see the difference in the body shapes in your last picture of all three of the pocket knives. You can also feel the difference in the shapes. Run your finger along the handle of a swelled center. Your finger slowly goes up, hits the "swell" and then slowly goes down. Do the same thing to the Rite Edge, completely different feel. Just my opinion my friend.

I agree with your evaluation Skip. I meant to mention it is 1/8 inch shorter than the 72's but forgot to. Not a clone but a 2nd cousin.

doglegg wrote: ↑Fri Sep 25, 2020 10:51 pm I agree.....

A VERY DISTANT 2nd cousin.

doglegg wrote: ↑Fri Sep 25, 2020 7:56 pm Picked up a clone, a variation and an almost out of the bay. The Craftsman has an Imperial tang stamp making it a clone, the Moor Man's is a 72 Yello Jaket marked 72 but with a Moor Man's shield

Rite Edge pics.

Nice looking group. Love the Yellow Jacket. The Craftsman is tough to find in any kind of decent shape. Great finds all.

Very nice finds Floyd! Congrats Buddy!

Thanks PB and Tom. I agree PB, the Craftsman were bought as tools to be used and most were.

The 2001 Remington R14 Show Knife came in last week. So adding it to my 72 Clones group. The blades were really stiff, so added some Tuff Glide and worked them a bit. They snap now. I believe this knife sit in the original box and plastic sleeve and was never exercised much, and I still (just in my opinion) really don't trust keeping knives in a plastic sleeve which some knife makers are famous for sealing their knives in. But I digress. Here is a couple of photos. One taken outside and one taken inside. I took the one inside because I could never get the blade etch to show up outside for some reason.

Sweet PB

Papa Bones wrote: ↑Sun Sep 27, 2020 2:29 pm The 2001 Remington.....

Smitty, That is one VERY good looking CAMILLUS 72 variation.
So, there appears to be 5 Remington variations.
The hunt continues.

doglegg wrote: ↑Sun Sep 27, 2020 2:59 pm Sweet PB

Thanks Floyd.

New_Windsor_NY wrote: ↑Sun Sep 27, 2020 3:49 pm
Smitty, That is one VERY good looking CAMILLUS 72 variation.
So, there appears to be 5 Remington variations.
The hunt continues.

Thanks Skip. Yep.......there is always another to hunt!!

....another one I didn't know existed!!!!........ ...............

I'm gonna post this under the "Is It?" category. I Found this last week and believe it could be a "72 Clone" depending on how accurate you want to be in length. According to my measurements it is just a Hair over 1/16th inch shorter than the Camillus 72 and most other clones. It is also a little wider. It is an Imperial Schrade Imp24 swell center whittler with Cracked Ice handles.

I added these to my Camillus 72 Clones group over the last 12 days. All are a variation I did not have.

First, a Camillus 1047 BSA Swell Center Whittler with the Round BSA Shield, & Delrin handles. It has the Camillus long line tang stamp. Next Is a Remington R14W with the multi-colored wood handles. It has the round Remington Shield, Round Remington Made In USA tang stamp, and Remington etch on the main blade. It came in the original box, with paperwork and was in the original plastic sleeve. Last Is A Remington RE18293 Swell Center Whittler With Black handles. It has the oval Remington Shield, with cursive "Remington USA" tang stamp. It does not have a blade etch and the model is not stamped on any of the other blades. This one came in the original plastic sleeve with the tag with barcode and model number on the sleeve. The seller didn't have the original box, but did include a newer green Remington box.

Papa Bones wrote: ↑Wed Oct 07, 2020 11:22 pm I added these.....

Smitty, with the exception of the first knife that you posted, it's too short, they are ALL fine looking and legitimate CAMILLUS 72 variations. I have one similar to that first knife you posted and it too is just a tad off on the measurement. I removed it from my variation collection.

It also has a pen blade instead of the coping blade, the swell center is not pronounced enough to suit me and the bolsters are too bullet shaped. Picky. Picky. Picky.

jerryd6818 wrote: ↑Thu Oct 08, 2020 12:41 am It also has a pen blade instead of the coping blade, the swell center is not pronounced enough to suit me and the bolsters are too bullet shaped. Picky. Picky. Picky.

Picky picky picky ,yep but we love ya anyway you old Marine. Have a good night Jerry

Ripster wrote: ↑Thu Oct 08, 2020 12:56 am

jerryd6818 wrote: ↑Thu Oct 08, 2020 12:41 am It also has a pen blade instead of the coping blade, the swell center is not pronounced enough to suit me and the bolsters are too bullet shaped. Picky. Picky. Picky.

Picky picky picky ,yep but we love ya anyway you old Marine. Have a good night Jerry

If you want to see picky, take a trip through the Counterfiet Forum. I'm Mr. milquetoast compared to those guys.

jerryd6818 wrote: ↑Thu Oct 08, 2020 1:02 am

Ripster wrote: ↑Thu Oct 08, 2020 12:56 am

jerryd6818 wrote: ↑Thu Oct 08, 2020 12:41 am It also has a pen blade instead of the coping blade, the swell center is not pronounced enough to suit me and the bolsters are too bullet shaped. Picky. Picky. Picky.

Picky picky picky ,yep but we love ya anyway you old Marine. Have a good night Jerry

If you want to see picky, take a trip through the Counterfiet Forum. I'm Mr. milquetoast compared to those guys.

LMAO

Hey Papa Bones, the Black handled Remington is bone I believe. Smokey Mountain has one, the Remington and there is a plain one with black bone handles. Great pick up s.

Ripster wrote: ↑Thu Oct 08, 2020 12:56 am

jerryd6818 wrote: ↑Thu Oct 08, 2020 12:41 am It also has a pen blade instead of the coping blade, the swell center is not pronounced enough to suit me and the bolsters are too bullet shaped. Picky. Picky. Picky.

Picky picky picky ,yep but we love ya anyway you old Marine. Have a good night Jerry

To me the shortness is partially in the way they ground down the rear bolster. It's definitely not concentric going to the bottom. I was also set back on their choice of blades, Especially the smaller clip blade. It is also a lot thicker with thicker back springs. But I mainly posted it just for critique from you guys.

jerryd6818 wrote: ↑Thu Oct 08, 2020 1:02 am
If you want to see picky, take a trip through the Counterfiet Forum. I'm Mr. milquetoast compared to those guys.

Would that be Jasper Milquetoast?

Papa Bones wrote: ↑Wed Oct 07, 2020 10:37 pm I'm gonna post this under the "Is It?" category. I Found this last week and believe it could be a "72 Clone" depending on how accurate you want to be in length. According to my measurements it is just a Hair over 1/16th inch shorter than the Camillus 72 and most other clones. It is also a little wider. It is an Imperial Schrade Imp24 swell center whittler with Cracked Ice handles.

Imperial IMP24_a.png
Imperial IMP24 Whit_b.png

...........the first one doesn't look at all like a "72" to me???................ ..............