Page 3 of 4
Re: Electricians knives
Posted: Wed Apr 27, 2022 2:29 pm
by 1967redrider
FRJ wrote: โMon Apr 18, 2022 4:38 pm
I've got these three, scruffy but solid, single blade tools from Empire.
Nice trio, Joe.
Do you think they're all the same wood or Ebony, Rosewood and something else?
Re: Electricians knives
Posted: Wed Apr 27, 2022 7:54 pm
by FRJ
Thank you, Redrider.
Well, there is certainly Ebony on the left but I'm in the dark about the other two.
Perhaps a Rosewood in the middle covers but the covers on the right completely escape me.
If I had to guess I would say Olivewood with no confidence.

Re: Electricians knives
Posted: Sat Feb 15, 2025 5:17 pm
by Nev52
I have 3 electricians' knives. Camillus, Ulster were my dad's. The Klein & Son is mine.
.
Re: Electricians knives
Posted: Sat Feb 15, 2025 7:15 pm
by New_Windsor_NY
Here are most of mine.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Electricians knives
Posted: Sat Feb 15, 2025 7:36 pm
by Ripster
New_Windsor_NY wrote: โSat Feb 15, 2025 7:15 pm
Here are most of mine.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Nice variety of Electrician knives
That KK w/ signal Corp shield is a hard one to find !
Thanks for sharing .
Stay out of trouble out there

Re: Electricians knives
Posted: Sat Feb 15, 2025 10:19 pm
by Miller Bro's
Skip

Re: Electricians knives
Posted: Sat Feb 15, 2025 11:53 pm
by garddogg56
MAN this is a fine display of electricians knives


As an electrician by trade this is how I display mine each has a special place in my heart from my Dads ,my first journeymans and other special people I've met in my fifty years in the trade

Re: Electricians knives
Posted: Sun Feb 16, 2025 12:45 am
by New_Windsor_NY
Ripster wrote: โSat Feb 15, 2025 7:36 pm
Nice.....
Thank you, JP.
Thank you, Dimitri.

Re: Electricians knives
Posted: Sun Feb 16, 2025 1:06 am
by gsmith7158
Two Empires and a Camillus. The Empire in the center is the only one I've seen with a prest-o-lite key.
Re: Electricians knives
Posted: Sun Feb 16, 2025 1:23 am
by L8Tagain
I Love these knives, and these photos are Awesome!
Re: Electricians knives
Posted: Sun Feb 16, 2025 3:00 am
by Gtrclktr-351
Never thought of the electricians knife as being "pretty", but there sure are some pretty ones on display here.
Re: Electricians knives
Posted: Sun Feb 16, 2025 3:10 am
by doglegg
gsmith7158 wrote: โSun Feb 16, 2025 1:06 am
Two Empires and a Camillus. The Empire in the center is the only one I've seen with a prest-o-lite key.
That Empire is amazing!
Re: Electricians knives
Posted: Sun Feb 16, 2025 12:58 pm
by Ripster
gsmith7158 wrote: โSun Feb 16, 2025 1:06 am
Two Empires and a Camillus. The Empire in the center is the only one I've seen with a prest-o-lite key.
Have never seen a presto lite key on an electrician knife .
Thatโs very nice. Thanks for posting it Greg.

Re: Electricians knives
Posted: Sun Feb 16, 2025 2:59 pm
by ThatWeirdKnifeGuy
This knife was some what of a disappointment when it came in the mail. It's an Edgemark brand, NOS with the box. I thought it to be from Japan. The lock on the back is unique and I'm into the Japanese knives so I scooped it up with out properly reading the listing. You see, it was one of those garbage AI written things about how it's great for collectors because you can use it in both hands or whatever, so I stopped reading after a few words. It did however properly state at the end, I later learned, that the knife is in fact from Pakistan. Sad face.
It is, however, a decent knife. It's solid as can be, the bolsters, pins and springs look to be the same steel the blade is made of. The lock back mechanism I do find to be more functional and comfortable to use than the standard liner lock. I also appreciate that Pakistan is stamped on the tang, and not one of those insta-fade etches on the pile side near the spine. I'll add this to my user pile as I certainly won't be afraid to get it dirty.
Re: Electricians knives
Posted: Sun Feb 16, 2025 7:30 pm
by New_Windsor_NY
A slightly different pattern or style of electrician knife.....
During my 40 year career with Ma Bell, besides my EDC pocket knife, I carried this exact pattern or style of knife, along with snips (special scissors), in a two slotted leather holder. I lost or broke a few of these knives over the years. Made in the U.S.A. by JAMESON, this pattern or style of knife was used to open telephone cable to get access to the pairs of wires inside the cable. Then, by placing an individual wire between the blade of the knife and the thumb, and then VERY GENTLY pulling the individual wire with the other hand, the insulation would be easily removed WITHOUT removing or damaging ANY of the copper wire. I never tried to use this pattern or style of knife for any other function(s) other than opening cable and wire stripping. This particular knife is unused and in MINT condition. It measures 6 1/4" total length. The handle is made of a hard rubber or rubber-like substance. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Electricians knives
Posted: Sun Feb 16, 2025 9:35 pm
by Adam5
I have used Klein's version of the cable splicer's knife during my 40 year electrical career. It works quite well for removing the outer sheath of Romex cable.
Re: Electricians knives
Posted: Thu Apr 24, 2025 9:05 pm
by Nev52
I just picked up this electrician's knife. Never have seen this brand before Holub out of Sycamore Illinois. Knife looks well made. Has anyone seen this brand??
Re: Electricians knives
Posted: Thu Apr 24, 2025 9:08 pm
by New_Windsor_NY
Nev52 wrote: โThu Apr 24, 2025 9:05 pm
I.....
Would you post it here also:
https://www.allaboutpocketknives.com/kn ... php?t=2659
and just here on AAPK.....
Re: Electricians knives
Posted: Thu Apr 24, 2025 9:18 pm
by Nev52
Done

Thanks for the information,

Skip
Re: Electricians knives
Posted: Thu Apr 24, 2025 9:19 pm
by New_Windsor_NY
Nev52 wrote: โThu Apr 24, 2025 9:18 pm
Done.....
You're VERY welcome.

Re: Electricians knives
Posted: Sun Mar 01, 2026 5:25 pm
by PringleTree
Hello all. Here are a couple of electricians knives that were modified by owners previous to me. The screwdriver blades being made into cutting blades. A Kutmaster, on the left, that I've had for a while and a long-line Camillus that I pulled out of EBAY this past week. They're not pretty, but I think they're interesting. One more and I guess I'll have a collection.
Thanks for looking,
Chris J.
Re: Electricians knives
Posted: Sun Mar 01, 2026 10:46 pm
by Ridgegrass
I had one of those blue rubber coated cable splicer's knives a while back. The only mark it had was "R4" stamped on the tang, I thought it might be a Remington but it was only a guess. ???? Any info appreciated. J.O'.
Re: Electricians knives
Posted: Sun Mar 01, 2026 11:27 pm
by knife7knut
Some electricians knives:
CAMILLUS
SCHRADE
KINGSTON
BOKER
ULSTER
PAL
OK
XCELITE
RIC-NOR
COLONIAL
IMPERIAL
TOOL PEOPLE
KUTMASTER
SABRE
I probably forgot a couple.
Re: Electricians knives
Posted: Mon Mar 02, 2026 4:37 pm
by PringleTree
knife7knut wrote: โSun Mar 01, 2026 11:27 pm
Some electricians knives:
CAMILLUS
SCHRADE
KINGSTON
BOKER
ULSTER
PAL
OK
XCELITE
RIC-NOR
COLONIAL
IMPERIAL
TOOL PEOPLE
KUTMASTER
SABRE
I probably forgot a couple.
Great collection! That bright yellow Holub is really eye-catching.
Chris J.
Re: Electricians knives
Posted: Wed Mar 04, 2026 3:39 am
by tvic
Real nice electricianโs knives, Chris!
Awesome collection there, knife7knut!