Page 3 of 15

Re: Shapleigh Hardware Co.

Posted: Sun Apr 30, 2017 12:18 pm
by 1967redrider
Saddlehorn hunter . . . I like that pattern! ::tu:: ::tu:: Didn't Tony Bose re-create that pattern recently?

Great looking knives all around. That Boy's Knife is pretty cool looking too, in it's simplicity. ::nod::

Re: Shapleigh Hardware Co.

Posted: Thu May 18, 2017 2:28 am
by Duffer
Just in--Congress pattern Shapleigh DE folder. It is 3 & 3/8 inches closed. Stag handle I would guess. Very good overall condition. Has almost completely sunken joints. All blades W&T with no lateral blade play when blades fully extended. Pretty full blades. Lloyd

Re: Shapleigh Hardware Co.

Posted: Thu May 18, 2017 2:41 am
by FRJ
A very smart and elegant little Congress, Lloyd. Good score. ::tu::

Re: Shapleigh Hardware Co.

Posted: Thu May 18, 2017 4:09 pm
by danno50
Ditto what Joe said, Lloyd, beautiful knife! ::tu:: You sure seem to be able to find a lot of nice knives.
Dan

Re: Shapleigh Hardware Co.

Posted: Thu May 18, 2017 7:12 pm
by Duffer
Hey thanks Joe and Dan for the nice comments on this DE Congress! Dan what can I say, I am retired and spend a lot of time looking for high grade examples ::paranoid:: However, I have a champagne craving and a beer budget! I get lucky once and awhile simply because I turn over a lot of rocks :D Lloyd

Re: Shapleigh Hardware Co.

Posted: Sun Sep 10, 2017 11:28 pm
by WelderBob
A Shapleigh DE toothpick with bail. I assume they could be ordered with a bail, this looks like a factory job.

Re: Shapleigh Hardware Co.

Posted: Mon Sep 11, 2017 12:33 am
by FRJ
Nice knife, Bob.
I'm curious about the bail. I doesn't look like nickel silver and it looks like it was tumbled but not finished.
Not to say it isn't factory. It certainly could be.

Re: Shapleigh Hardware Co.

Posted: Mon Sep 11, 2017 1:03 am
by WelderBob
Thanks Joe, the bail and pin are steel, I've seen pictures of knives clipped to fishing vests.
I'm sure that was the reason on this one. Factory or not I think its a keeper... ::nod::

Re: Shapleigh Hardware Co.

Posted: Mon Sep 11, 2017 1:59 am
by FRJ
I think so too, Bob. Great knife. ::tu:: ::tu::

Re: Shapleigh Hardware Co.

Posted: Fri Sep 15, 2017 5:28 pm
by WelderBob
Nice Shapleigh light trapper in stag.

Re: Shapleigh Hardware Co.

Posted: Fri Sep 15, 2017 11:41 pm
by FRJ
And that is a beauty!
Very nice, Bob. Thanks for showing it. ::tu::

Re: Shapleigh Hardware Co.

Posted: Sat Sep 16, 2017 2:50 pm
by danno50
Couple of beauties, Welderbob! ::tu:: ::tu:: Great swedge on the trapper!
Dan

Re: Shapleigh Hardware Co.

Posted: Thu Oct 05, 2017 11:46 pm
by Duffer
Here is a Norvell Shapleigh DE Jack I just recently acquired. This jack is marked only on the master spear blade tang Norvell Shapleigh DE--no tang mark on the secondary pen tang. According to Goins page no. 250 the blades were all marked until the mid 1940s after which only the master blade was marked. This folder seems older than mid 1940s or later. I have some other Shapleigh DE folders (Jacks and Congresses) with all blades tang marked and several look very similar to this one. Although it has been lightly buffed and polished (not by me) it has what I would consider older pick bone handles and hand hammered pins. Am I missing something or is this indeed a mid 1940s produced folder? Thanks for your input and help!

Re: Shapleigh Hardware Co.

Posted: Fri Oct 06, 2017 12:46 am
by peanut740
Duffer,I agree the bone appears to be consistent with Empire who made Diamond Edge knives until they closed.The pen blade could be a replacement. ::shrug::

Re: Shapleigh Hardware Co.

Posted: Sun Oct 08, 2017 5:02 am
by Duffer
Thanks Roger I appreciate your input! It does look Empirish to me too ::nod:: It could very well be that the pen is a replacement blade if What Goins claims is true.

Re: Shapleigh Hardware Co.

Posted: Sun Oct 08, 2017 2:42 pm
by FRJ
That's a very nice looking jack you're showing, Lloyd.
Thank you for showing it here.

Re: Shapleigh Hardware Co.

Posted: Sun Oct 08, 2017 5:33 pm
by danno50
Very nice, Lloyd! ::tu::
Dan

Re: Shapleigh Hardware Co.

Posted: Tue Oct 10, 2017 12:14 am
by Duffer
Thanks Joe and Dan. I appreciate your kind comments on this DE Jack!!

Re: Shapleigh Hardware Co.

Posted: Tue Oct 10, 2017 1:15 am
by gsmith7158
Duffer wrote:Thanks Joe and Dan. I appreciate your kind comments on this DE Jack!!
Lloyd here's something i noticed about your knife. It certainly looks Empire made to me, but if it is then our theory about Hdwe and Hdw did not hold true in the Norvell Shapliegh days.

Re: Shapleigh Hardware Co.

Posted: Thu Sep 13, 2018 4:51 am
by Duffer
Here is a Shapleigh HDW DE equal end opposite end Jack that I have been meaning to post some photos of but the heat here has lately made me lazy and forgetful :( B. Levine calls this a Texas Jack or Moose pg. 190 4th edition. Total closed length is 4.25 inches and has pretty full blades with minor blade loss. What looks like handle chip below mark side middle pin is just lack of focus and the light. It is a heavy and pretty impressive folder in hand. On the primary spear blade back tang is the Shapleigh pattern no. B639. In the Schrade catalog supplement of 1930 is a folder that looks just like it identified as pattern no. R7973. This one has been cleaned and polished at some point in the past (not by me) but nonetheless is a nice vintage folder pattern you don’t see often.

Re: Shapleigh Hardware Co.

Posted: Thu Sep 13, 2018 6:12 am
by RobesonsRme.com
Lloyd, I love Double-Ended Jacks, Texas Jacks or Moose patterned knives, whatever one chooses to call them.

And that one is a dandy. ::tu::

Charlie Noyes

Re: Shapleigh Hardware Co.

Posted: Thu Sep 13, 2018 11:50 am
by peanut740
Lloyd,I agree with Charlie,that is a dandy! ::tu::

Re: Shapleigh Hardware Co.

Posted: Thu Sep 13, 2018 12:24 pm
by FRJ
Lloyd, you brought this thread back with another beautiful knife. Thank you for showing it here. ::nod::
That thing is beautiful in every way. ::tu::

Re: Shapleigh Hardware Co.

Posted: Thu Sep 13, 2018 9:39 pm
by biglmbass
That's a jewel of a knife, Duffer. ::tu::

Re: Shapleigh Hardware Co.

Posted: Fri Sep 14, 2018 12:16 am
by BWT
Beautiful knife Lloyd, thanks for sharing!!