All About Pocket Knives

Ripster wrote: ↑Fri Jun 11, 2021 11:19 am Grabbed this one for 20 bucks till can find one in better shape and a full blade . For now this one will do . If any of you folks have one in very good shape and would be willing to part with it ,let me know .

Vit_213 wrote: ↑Fri Jun 11, 2021 11:30 am

Ripster wrote: ↑Fri Jun 11, 2021 11:19 am Grabbed this one for 20 bucks till can find one in better shape and a full blade . For now this one will do . If any of you folks have one in very good shape and would be willing to part with it ,let me know .

+1
This is my story too

Papa Bones wrote: ↑Wed Jun 16, 2021 6:06 pm I'm.....

New_Windsor_NY wrote: ↑Wed Jun 16, 2021 6:50 pm
GORGEOUS find & acquisition, Smitty.

doglegg wrote: ↑Wed Jun 16, 2021 7:59 pm Love it Papa B. Great job on the clean up.

My latest old Camillus. A 4 line EO with a clip blade and brass liners so probably pre WW2. Bail is missing and the blade is rough, but privileged to get it. DSCN6998.JPGDSCN6999.JPGDSCN7000.JPGDSCN7001.JPG

Papa Bones wrote: ↑Wed Jun 16, 2021 6:06 pm I'm gonna put this here as it was made by Camillus, but sold through Sears under the DUNLAP name, and was Sears middle grade of knives. A DunLap U.S.A. Hawkbill or as listed in the Sears Catalogs, a Pruner. The tang stamp is clear, and is listed in Goin's as being used from 1938 until 1942, but Sears must have purchased plenty because the Dunlap pruners are listed in their catalogs as an option up until 1952, even though the Craftsman name was started on some knives after 1942. I had to do a little cleaning on it. The blades were fine, but the pile side bolster had a large clump of rust. The wood handles look like they had a heavy coat of varnish or shellac on them. I washed the knife with some Murphy's oil soap, then cleaned the handles with denatured alcohol, which removed the shellac. Then soaked in warm mineral oil overnight. Flushed with wd-40 and blew off with compressed air. I've rubbed in four coats of boiled linseed oil. The pile side handle is somewhat darker. I think it turned out good. The blade is tight with strong snap, a positive half stop, but do have age spots and some tiny pits in areas. The liner lock, and liners are all steal. The liner lock requires a little more pressure to push in then the newer brass liner locks you encounter, but the steel one locks up against the blade good. Here are some photos.
Dunlap Hawkbill_a.png
Dunlap Hawkbill_b.png
Dunlap Hawkbill_c.png
Dunlap Hawkbill_e.png

doglegg wrote: ↑Wed Jun 16, 2021 7:59 pm Love it Papa B. Great job on the clean up.

My latest old Camillus. A 4 line EO with a clip blade and brass liners so probably pre WW2. Bail is missing and the blade is rough, but privileged to get it. DSCN6998.JPGDSCN6999.JPGDSCN7000.JPGDSCN7001.JPG

doglegg wrote: ↑Wed Jun 16, 2021 7:59 pm Love.....

Ripster wrote: ↑Thu Jun 17, 2021 1:08 am
Smitty, that cleaned up nice. Like the Dunlap stamp on that old Pruner / hawkbill. Nice Save

Dan In MI wrote: ↑Fri Jun 18, 2021 2:37 am Here's my contribution: an electrician's knife. With the tang stamp and "U.S.N." stamped onto the one cover, I'm thinking it's likely from World War II. It's a treat for the eyes (and, with excellent snap, the ears)!

41yrcollk wrote: ↑Wed Jul 07, 2021 2:36 pm Some early C055A152-1FBF-4E5D-975A-AAA4DBCDE46F.jpeg3ACEC6A7-2E94-4BB4-99F4-C38278033D26.jpeg3ACEC6A7-2E94-4BB4-99F4-C38278033D26.jpegD6C2391F-969D-47D1-883D-CBC4DA916BE0.jpeg

Papa Bones wrote: ↑Thu Jul 08, 2021 10:59 pm A CAMCO 801 which was made by Camillus. A 3-1/8", tip bolster swell end jack which had the screwdriver blade / cap lifter, and had the imitation pearl handles that Camillus called Nu-Pearl. Blades are full, no wobble and have good snap. It is listed in the CAMCO / Camillus Catalogs through the 1950's but by the late 1950's they were no longer listed in the Open Stock sections. By the late 50's and early 60's most of the tip bolster knives had been discontinued with the exception of the tip bolster Senator Pen knives. Although, some were included in The Bonus Buckets, manufacturers closeout section of the catalogs.

This one I received as a gift with another knife I had purchased from our friend Ripster here on AAPK. He knows I like most knives made by Camillus and am also fond of advertising / promo knives, especially when you can date them. On the Mark side handle it has "SEVEN-UP BOTTLING CO. over TOMAH, WIS. PHONE 309. Being a three digit phone number, I believe it is from the 1950's.

Here are the pictures.

Camco 801 NuPearl adv_b.png
Camco 801 NuPearl adv_a.png
Camco 801 NuPearl adv_c.png
Camco 801 NuPearl adv_d.png

Papa Bones wrote: ↑Thu Jul 08, 2021 10:59 pm A.....

Ripster wrote: ↑Thu Jul 08, 2021 11:13 pm
Smitty, glad you like the little Camco Adv. knife. They are a fun one to collect,it’s getting to be a challenge to find the 3 ,even 4 digit phone number ones in decent shape. It’s got a good home now,am sure of that. Take care my Friend

New_Windsor_NY wrote: ↑Thu Jul 08, 2021 11:23 pm
Smitty, that's a FINE lking CAMCO 801!
In regards to the telephone number, check this out:
https://www.allaboutpocketknives.com/kn ... 35&t=71682