Page 20 of 56
Re: Old Keen Kutter Knives
Posted: Mon Jan 01, 2018 3:15 pm
by galvanic1882
Thanks Guys
Re: Old Keen Kutter Knives
Posted: Mon Jan 01, 2018 3:42 pm
by stockman
tallguy where in Kansas did you live?
Harold
Re: Old Keen Kutter Knives
Posted: Fri Jan 12, 2018 7:44 pm
by danno50
My first two knives of 2018. Actually purchased in late 2017 but did not make their way to me until early 2018. First a Keen Kutter pen, K02423, made between 1921 and 1942, according to Sellens. I think earlier in the time period and likely made by Winchester? Second is a K2223, in the catalogs between 1921 and 1929, so very likely made by Winchester.
Dan
Re: Old Keen Kutter Knives
Posted: Fri Jan 12, 2018 7:49 pm
by danno50
My first knife purchased in 2018. Peanut740 posted this one a couple of pages back. But, now that it is mine I am posting a couple of more pictures. Not sure what to call this pattern except a jack knife. It is a K2901, in the catalogs between 1917 and 1920, a Walden made knife
Dan
Re: Old Keen Kutter Knives
Posted: Fri Jan 12, 2018 8:23 pm
by peanut740
Dan,that knife still looks good.

Re: Old Keen Kutter Knives
Posted: Sat Jan 13, 2018 4:29 am
by Duffer
Dan those are some great additions to your Keen Kutter collection! What a great way to start the 2018 vintage knife collecting season

I really like that Walden made Jack with beautiful pick bone curved handles

Re: Old Keen Kutter Knives
Posted: Sat Jan 13, 2018 4:32 am
by peanut740
Lloyd,that's Walden Knife,not Schrade.
Re: Old Keen Kutter Knives
Posted: Sat Jan 13, 2018 4:34 am
by Duffer
Yeah thanks Roger I realized my error and corrected it

Re: Old Keen Kutter Knives
Posted: Sat Jan 13, 2018 4:47 am
by danno50
thanks for the comments Roger and Lloyd, I am very happy with that jack, very sturdy feeling.
Dan
Re: Old Keen Kutter Knives
Posted: Tue Jan 16, 2018 1:17 am
by Pile Driver
Here's an older one that probably falls into the boys knife category. It's just shy of 3" long a mini jack.
Re: Old Keen Kutter Knives
Posted: Tue Jan 16, 2018 1:24 am
by danno50
Very nice, Pile Driver!
Dan
Re: Old Keen Kutter Knives
Posted: Tue Jan 16, 2018 1:26 am
by galvanic1882
Very nice!
Re: Old Keen Kutter Knives
Posted: Tue Jan 16, 2018 2:38 am
by peanut740
Nice

Re: Old Keen Kutter Knives
Posted: Tue Jan 16, 2018 2:44 am
by tongueriver
Pile Driver wrote:Here's an older one that probably falls into the boys knife category. It's just shy of 3" long a mini jack.
Beautiful minty small jack!

Re: Old Keen Kutter Knives
Posted: Thu Mar 29, 2018 9:22 pm
by JohnR
Picked up this rusty E.C. Simmons Keen Kutter bare end jack, pattern 2108. Has seen little use, blades are full but the pen has a perfect half moon out of it, only thing I can figure is someone wanted a wire stripper. Bone is really nice.
Re: Old Keen Kutter Knives
Posted: Fri Mar 30, 2018 4:57 am
by danno50
Lovely old Keen Kutter jack, John!

Almost full blades and beautiful bone. Too bad someone took that chunk out of the pen blade. Makes a person wonder why?? Looks like it was done on purpose?
Dan
Re: Old Keen Kutter Knives
Posted: Fri Mar 30, 2018 9:01 am
by JohnR
Thanks Dan, definitely done on purpose, not a hack job it is very well done but I don't know why, one of those mysteries we get from collecting old knives.
I am thinking wire stripper but it would have to be for large gauge wire.
Re: Old Keen Kutter Knives
Posted: Fri Mar 30, 2018 8:14 pm
by edge213
It's still a good looking old knife.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 7:39 pm
by danno50
The next few posts are going to be the knives I picked up at the 2018 OKCA show. First off are two Simmons Hardware Co. Germany knives. First is a 3 5/8" doctor's knife, then a 3" whittler.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 7:43 pm
by danno50
Next are two Simmons Hardware Co knives. First a 3 5/8" bone handled jack and a 2 7/8" 4 blade senator with a fancy scroll Keen Kutter etch.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 7:46 pm
by danno50
Next up are two peanuts: A older K713 and a 50's era K838, likely made by Schrade? Both are 2 7/8" in length.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 7:54 pm
by danno50
Next are three lobsters: First is a K0443, made between 1915 and 1929 according to Sellens, has a faint etched pattern number; next is a K0444, made between 1917 and 1920 according to Sellens, has an etched pattern number and salesman ink; last three pics are a K5035SSG, made between 1910 and 1920 according to Sellens, has an etched pattern number and faint salesman ink, has also suffered some mal storage with significant pitting on the end of the main blade.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 8:07 pm
by danno50
Finally here are two two blade jacks: first a K7727 dogleg jack, 3 1/2", made between 1917 and 1934 according to Sellens, has a faint blade etch; and a K2198 3/4 jumbo jack, 4", made between 1930 to 1934 according to Sellens.
I believe both knives were made very close to the same time for the following reasons: very similar bone, identical shields, both tang stamps have the ears at the top of the wedge and both knives tang stamps that have Made in USA under the Keen Kutter, rather than the more common St. Louis Mo..
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 9:03 pm
by peanut740
Dan,I really like the last 2 jacks,they are A+.The Simmons doctors knife I believe is a so called Jim Parker factory find from the early 2000's.He put those out that had that deep Hornet blade stamp.I think there were a couple other patterns also.They supposedly were old parts and he had put together at the Olbertz factory in Germany.
Re: Old Keen Kutter Knives
Posted: Mon Apr 16, 2018 9:09 pm
by danno50
Thanks for the kind comment on the jacks and the information on the doctors knife, Roger. I thought the doctors knife looked to blockily hafted to be a very old knife, also got it fairly cheap.