All About Pocket Knives

Jtx wrote: ↑Thu Jan 05, 2023 1:15 pm

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

Redrider that is a nice Keen Kutter! It inspired me to get out my Clauss dogleg jack.

Sweet one, Jtx.

GREAT carry's one and ALL !!!
John and Lee.. Them doglegs are KOOL!!!
John

jmh58 wrote: ↑Thu Jan 05, 2023 4:44 pm GREAT carry's one and ALL !!!
John and Lee.. Them doglegs are KOOL!!!
John

One of my favorite patterns, thank you, Sir.

jmh58 wrote: ↑Thu Jan 05, 2023 4:44 pm GREAT carry's one and ALL !!!
John and Lee.. Them doglegs are KOOL!!!
John

Thanks

Jtx wrote: ↑Thu Jan 05, 2023 1:15 pm

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

Redrider that is a nice Keen Kutter! It inspired me to get out my Clauss dogleg jack.

Cool pair, great bones, great micarta. Nice pose too.

Carries par excellence from all! And don't worry; no dog nor cat shall be permitted to chew on my Opinel.

Today a newly acquired Rough Ryder half hawk and a Schrade 708B found their way into my pockets.

Edit: I forgot I wanted to add a photo of a 104OT with a good bit of darkening.

Oledadsknives wrote: ↑Thu Jan 05, 2023 6:06 am

GSPTOPDOG wrote: ↑Wed Jan 04, 2023 7:24 pm

woodwalker wrote: ↑Wed Jan 04, 2023 1:52 am
Yes sir. Here ya go.

This one that I picked up has no markings, so I am a loss as to the maker...

Great lookin little swell center!! That ok no mark , it will cut!! Jimbo

Thanks! ... ...and the end isn't that the bottom line "Will it cut?"

Ivoryman wrote: ↑Thu Jan 05, 2023 6:12 pm

Jtx wrote: ↑Thu Jan 05, 2023 1:15 pm

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

Redrider that is a nice Keen Kutter! It inspired me to get out my Clauss dogleg jack.

Cool pair, great bones, great micarta. Nice pose too.

Thanks

Keeping things pretty simple today.

I think I could probably swap the Leatherman Rev for a SAK (or even my Crater C33T); as the two pairs of Knipex pliers are stronger than any Leatherman, and the small combination pliers are better at cutting most wire.

However, the LM does have a pocket clip and is one of my lighter ones. Only my big SAKs have a file, and the small fine file on the screwdriver/ruler is pretty adequate.
I also had the Wenger Pocket Toolchest to cover most of the stuff the LM didn't have--like scissors, the awl/leather punch, an ultra-small slotted screwdriver, and tweezers. I also keep my nailfiles and metal files as separate.

The Buck was in my sweatpants and carried over to the front button chest pocket on my overalls as the backup knife.

The Winchester money clip is an el-cheapo, but it has to replace a Japanese-made Kershaw I lost until I can get another one. Thinking about switching to Zippos and Imperials since they were made in huge numbers.

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

Sweeeeeeeeeeeeet!

Jtx wrote: ↑Thu Jan 05, 2023 1:15 pm

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

Redrider that is a nice Keen Kutter! It inspired me to get out my Clauss dogleg jack.

Sweeeeeeeeet!

Great pair of Northfields David, love’n that wharncliff!!!

Jimbo

Oledadsknives wrote: ↑Thu Jan 05, 2023 10:29 pm Great pair of Northfields David, love’n that wharncliff!!!

Jimbo

Thank you Jimbo!

DM11 wrote: ↑Thu Jan 05, 2023 9:52 pmKIMG5887~2.JPG

Great pair of beauties. Congrats on that Sheffield Jack, beautiful knife. Love the bone. And the axe head is a great background too.

Ivoryman wrote: ↑Fri Jan 06, 2023 7:29 am

DM11 wrote: ↑Thu Jan 05, 2023 9:52 pmKIMG5887~2.JPG

Great pair of beauties. Congrats on that Sheffield Jack, beautiful knife. Love the bone. And the axe head is a great background too.

Thank you Ivoryman!

Quick Steel wrote: ↑Fri Jan 06, 2023 10:52 am P1020322.JPG

Sweet knife QS!!

Thanks David, and that's a sweet combo.

Very cool carry, QS. I love that Keystone shield.

On the 12th day of Christmas, I decided to carry a Case -28 pattern dogleg.

DM11 wrote: ↑Thu Jan 05, 2023 9:52 pmKIMG5887~2.JPG

Those are two great knives

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

That KK is really nice. Great old Pattern.

Harold

stockman wrote: ↑Fri Jan 06, 2023 3:05 pm

1967redrider wrote: ↑Thu Jan 05, 2023 1:05 pm Sweet combo, bighomer.

First day back to work this year, felt like a dogleg kinda day. There's still some Keen Kutter etch on this one.

That KK is really nice. Great old Pattern.

Harold

Thanks, Harold. I think I bought it off of BFORSE here.

I love all the dog legs, one of my favorite patterns. Packing a Wallkill Walden NY that had a broke punch that I reshaped.

David, QS, rr and luckydog all great carries.

doglegg wrote: ↑Fri Jan 06, 2023 4:17 pm David, QS, rr and luckydog all great carries.

Wont dispute that!!
John