Page 17 of 22

Re: Single blade Saturday

Posted: Sun May 24, 2026 12:58 am
by Gtrclktr-351
One of the knives I’ve had the longest. It was ordered, I think, from Frost in the early to mid 70s. It is a lockback, with blue mirror synthetic handle scales. The stainless blade etch says “Classic” and the tang stamp reads “Stainless Steel over Japan”. Fit and finish are good and lockup is tight. Very slim and lightweight. I can’t imagine why, but I’ve never seen another one like it.😉

Re: Single blade Saturday

Posted: Sun May 24, 2026 1:28 am
by doglegg
Dinadan wrote: Sat May 23, 2026 9:41 pm
FRJ wrote: Sat May 23, 2026 12:00 pm Showing a large Robeson.
That Robeson looks just about mint, Joe!
tvic wrote: Sat May 23, 2026 3:52 pm Here’s a Remington Bullet from 1987…
Tim - that knife also looks new. A beauty!
1967redrider wrote: Sat May 23, 2026 5:56 pm On I-66 again, ceramic blade upgrade. #sharp
Redrider - knife is a cool bit of Americana.

Here is my submission for today; a small fruit knife.
silver11.jpg
Mel, I think you are the first person I have seen actually use a fruit knife.

Re: Single blade Saturday

Posted: Sun May 24, 2026 1:28 am
by doglegg
Froe wrote: Sun May 24, 2026 12:20 am Celebrated this rainy Single Blade Saturday by rehandling this worn little Utica keychain knife for giggles. Had to oversized the pins because the pivot hole was wallowed out.
Froe
Great work.

Re: Single blade Saturday

Posted: Sun May 24, 2026 1:33 am
by Froe
doglegg wrote: Sun May 24, 2026 1:28 am
Froe wrote: Sun May 24, 2026 12:20 am Celebrated this rainy Single Blade Saturday by rehandling this worn little Utica keychain knife for giggles. Had to oversized the pins because the pivot hole was wallowed out.
Froe
Great work.
Thanks!

Re: Single blade Saturday

Posted: Sun May 24, 2026 1:53 am
by FRJ
Great looking knives for this Saturday, guys. ::tu:: ::tu::

There's still time for others to show their single blades. ::nod::

Re: Single blade Saturday

Posted: Sun May 24, 2026 2:57 am
by Lansky1
Got these in under the wire ... a pair of Copperlocks ::tu::
dgd.jpg

Re: Single blade Saturday

Posted: Sun May 24, 2026 4:07 am
by orvet
I just posted this in another topic but it definitely qualifies for Single Blade Saturday!

Re: Single blade Saturday

Posted: Sun May 24, 2026 1:41 pm
by FRJ
Two good looking knives, John. ::tu::


A very nice Kershaw, Dale, with a great message! ::tu:: ::nod::

Re: Single blade Saturday

Posted: Mon May 25, 2026 10:47 am
by OneDoxa
Boker Jagdtaschenmesser Mono

Re: Single blade Saturday

Posted: Sat May 30, 2026 10:14 am
by FRJ
OneDoxa wrote: Mon May 25, 2026 10:47 am Boker Jagdtaschenmesser Mono
Nice Boker, OneDoxa. ::tu::

I'm showing a trapper on this Saturday by "winchester".

Welcome all!

Re: Single blade Saturday

Posted: Sat May 30, 2026 1:38 pm
by QTCut5
I'll jump in early this week with a Queen #11 Slimline/Farmer's/Utility Trapper

Re: Single blade Saturday

Posted: Sat May 30, 2026 2:54 pm
by 1967redrider
Doing the coffee walk solo today, except for Mick. ☕️🚶‍♂️

Re: Single blade Saturday

Posted: Sat May 30, 2026 6:34 pm
by Dinadan
Nice bone on that Winchester, Joe.

Beautiful wood on that Queen, Q.

Redrider - looks like a nice walk.
Colt12b.jpg

Re: Single blade Saturday

Posted: Sat May 30, 2026 7:39 pm
by 1967redrider
Dinadan wrote: Sat May 30, 2026 6:34 pm Nice bone on that Winchester, Joe.

Beautiful wood on that Queen, Q.

Redrider - looks like a nice walk.

Colt12b.jpg

Thanks, Mel, and cool Colt commemorative. ::handshake::

Re: Single blade Saturday

Posted: Sat May 30, 2026 7:42 pm
by philco
Here's a Case Copperlock that is an Official Boy Scout knife. Case never produced an official Boy Scout knife until this series was released in 2005.

Re: Single blade Saturday

Posted: Sat May 30, 2026 8:18 pm
by FRJ
A great show of knives, guys. ::tu::

Thanks for showing them. ::nod::

NEXT!!

Re: Single blade Saturday

Posted: Sat May 30, 2026 10:35 pm
by Ridgegrass
Statue of Liberty 100th anniversary commemorative by SCHRADE. Mint, in the original display box. Awesome bones. Any interest? PM me. Thanks J.O'.

Re: Single blade Saturday

Posted: Sun May 31, 2026 12:02 am
by Tinpanva
Just acquired this 1976 Buffalo, had to add my jams & jellies to it to make it shiny and slick before being placed in its new home.

Re: Single blade Saturday

Posted: Mon Jun 01, 2026 3:26 am
by RedRaiderRick
Man you guys are bustin out some pretty ones.

Re: Single blade Saturday

Posted: Tue Jun 02, 2026 1:28 am
by Lansky1
QTCut5 wrote: Sat May 30, 2026 1:38 pm I'll jump in early this week with a Queen #11 Slimline/Farmer's/Utility Trapper
Q - love the wood on that Queen trapper - what kind of wood is that ? Almost looks like dyed zebrawood ? ::ds::

Re: Single blade Saturday

Posted: Tue Jun 02, 2026 1:41 am
by QTCut5
Lansky1 wrote: Tue Jun 02, 2026 1:28 am
QTCut5 wrote: Sat May 30, 2026 1:38 pm I'll jump in early this week with a Queen #11 Slimline/Farmer's/Utility Trapper
Q - love the wood on that Queen trapper - what kind of wood is that ? Almost looks like dyed zebrawood ? ::ds::
Exactly....Although I don't know if it's been dyed; Queen calls it "Curly Zebra".

John, I'm curious if you've ever done a Wharncliffe mod on a Slimline Trapper? ::hmm::

Re: Single blade Saturday

Posted: Tue Jun 02, 2026 4:06 pm
by tvic
Real nice single blades, everyone! ::tu::

Re: Single blade Saturday

Posted: Thu Jun 04, 2026 12:56 am
by Lansky1
QTCut5 wrote: Tue Jun 02, 2026 1:41 am
John, I'm curious if you've ever done a Wharncliffe mod on a Slimline Trapper? ::hmm::
Hey Q - I just pulled out a Case slimline trapper & the nail nick position looks like it would set up nice for a wharnie mod ... only issue is the blade would wind up being about a half inch shorter. I noticed the nail nick position on modern era Case's is different than your Queens, which have the forward nail nick - not sure there would be enough meat above the nick to form a curve on a Queen slimline unfortunately

Re: Single blade Saturday

Posted: Sat Jun 06, 2026 10:29 am
by FRJ
And it's a brand new Saturday for show and tell.

Here's a Buck 501 for today.

Re: Single blade Saturday

Posted: Sat Jun 06, 2026 2:42 pm
by tvic
That’s a nice one, Joe!