Page 16 of 22
Re: Single blade Saturday
Posted: Sat May 16, 2026 2:22 pm
by Waukonda
I have had this 5 1/4" brute "on deck" to be posted here for the past 4 or 5 weeks and kept forgetting.
Buehl Sons
Re: Single blade Saturday
Posted: Sat May 16, 2026 2:25 pm
by doglegg
FRJ wrote: ↑Sat May 16, 2026 1:27 pm
Showing a Challenge single blade for this Saturday.
Good day to you.
A very sweet knife.
Re: Single blade Saturday
Posted: Sat May 16, 2026 2:27 pm
by tvic
Nice ones, Joe and Ike!
Love this little Craftsman…
Re: Single blade Saturday
Posted: Sat May 16, 2026 3:07 pm
by Waukonda
tvic wrote: ↑Sat May 16, 2026 2:27 pm
Nice ones, Joe and Ike!
Love this little Craftsman…
That little Craftsman is a really nice looker, and as usual for one of your posts, it is very nicely presented.
Re: Single blade Saturday
Posted: Sat May 16, 2026 5:55 pm
by treefarmer
Back to my 1st love, Case!
This one was given to me by my best friend about 2 weeks before he went to his heavenly home back in 2018:
Treefarmer
Re: Single blade Saturday
Posted: Sat May 16, 2026 6:16 pm
by treefarmer
Another special Case single blade, this one was my Christmas gift from Miss Joy, our 1st married Christmas in 1966. Broke the hinge pin many years ago and only after joining up with AAPK did I realize Case would repair it. It got a bit of a spa treatment, we thought it was a new knife when it came in the mail! (This knife was a bit of a let down, the year before we were married she bought me a .357 Colt Trooper for Christmas.

Not really.

)
Treefarmer
Re: Single blade Saturday
Posted: Sat May 16, 2026 6:28 pm
by knifeaddict1965
Great stories treefarmer, and a bunch of nice Single Blades posted by all today!
Re: Single blade Saturday
Posted: Sat May 16, 2026 6:40 pm
by Dinadan
Joe - very nice old Challenge.
Ike - the brute is a beauty.
Tim - I always like Craftsman and that one looks mint.
Treefarmer - those are fine Case knives with a lot of backstory.
My contribution today is a little Schrade 12OT.
Re: Single blade Saturday
Posted: Sat May 16, 2026 7:48 pm
by treefarmer
Dinadan wrote: ↑Sat May 16, 2026 6:40 pm
Joe - very nice old Challenge.
Ike - the brute is a beauty.
Tim - I always like Craftsman and that one looks mint.
Treefarmer - those are fine Case knives with a lot of backstory.
My contribution today is a little Schrade 12OT.
Schrade53a.jpg
Thany Mel. Backstories are always interesting to me, I reckon that is why I share them every now and then.
Treefarmer
Re: Single blade Saturday
Posted: Sat May 16, 2026 8:44 pm
by FRJ
Re: Single blade Saturday
Posted: Sat May 16, 2026 9:07 pm
by QTCut5
Wild Turkey 4150, my all-time favorite Kershaw

Re: Single blade Saturday
Posted: Sat May 16, 2026 9:26 pm
by tvic
Thanks, Ike, Mel and Joe!
Some GOOD looking knives, treefarmer, Kevin, Q and Mel!
Re: Single blade Saturday
Posted: Sun May 17, 2026 1:27 pm
by TheHenckelsCollector
3 Prototype 1st gen’s with that celluloid swirl.
Re: Single blade Saturday
Posted: Sun May 17, 2026 11:34 pm
by FRJ
TheHenckelsCollector wrote: ↑Sun May 17, 2026 1:27 pm
3 Prototype 1st gen’s with that celluloid swirl.
IMG_2989.jpeg
Very nice looking knives, TheHenckelsCollector.
Welcome here and thanks for showing your knives.

Re: Single blade Saturday
Posted: Mon May 18, 2026 12:35 am
by Dinadan
Very nice Northwoods and Kershaw, Kevin and Q.
HenckelsCollector - those Bulldogs are three beauties! Welcome to the forum!
Re: Single blade Saturday
Posted: Sat May 23, 2026 12:00 pm
by FRJ
And another Saturday for single blades.
Welcome!
Showing a large Robeson.
Re: Single blade Saturday
Posted: Sat May 23, 2026 3:42 pm
by 1967redrider
Waukonda wrote: ↑Sat May 16, 2026 2:22 pm
I have had this 5 1/4" brute "on deck" to be posted here for the past 4 or 5 weeks and kept forgetting.
Buehl Sons
Sweet 'naner Trapper!

Re: Single blade Saturday
Posted: Sat May 23, 2026 3:52 pm
by tvic
GOOD looking knife, Joe!
Here’s a Remington Bullet from 1987…
Re: Single blade Saturday
Posted: Sat May 23, 2026 5:56 pm
by 1967redrider
On I-66 again, ceramic blade upgrade. #sharp
Re: Single blade Saturday
Posted: Sat May 23, 2026 6:51 pm
by FRJ
Great knives, Tim and redrider.

Re: Single blade Saturday
Posted: Sat May 23, 2026 8:45 pm
by 1967redrider
FRJ wrote: ↑Sat May 23, 2026 6:51 pm
Great knives, Tim and redrider.
Thanks, Joe, and I meant to asked if you knew anything about the etched company on the blade?
Re: Single blade Saturday
Posted: Sat May 23, 2026 9:41 pm
by Dinadan
FRJ wrote: ↑Sat May 23, 2026 12:00 pm
Showing a large Robeson.
That Robeson looks just about mint, Joe!
tvic wrote: ↑Sat May 23, 2026 3:52 pm
Here’s a Remington Bullet from 1987…
Tim - that knife also looks new. A beauty!
1967redrider wrote: ↑Sat May 23, 2026 5:56 pm
On I-66 again, ceramic blade upgrade. #sharp
Redrider - knife is a cool bit of Americana.
Here is my submission for today; a small fruit knife.
Re: Single blade Saturday
Posted: Sat May 23, 2026 11:00 pm
by FRJ
1967redrider wrote: ↑Sat May 23, 2026 8:45 pm
Thanks, Joe, and I meant to asked if you knew anything about the etched company on the blade?
Here is a better picture of that etch.
I have seen this etch on a few other "daddy Barlows".
I think someone commented on this etch on the Robeson but I don't remember where. Maybe a search.
Sorry I don't have much information on that.
Re: Single blade Saturday
Posted: Sat May 23, 2026 11:02 pm
by treefarmer
Mel,
The small fruit knife is a looker! The stamps on the blade, what do they indicate?
Here for the Single Blade Saturday is a Camillus Rope Knife. According to tang stamp information here on the forum, it is 1941-'46 year of production. I have 2 of these, this one is better of the two:
Question for the Camillus collectors, both of my knives have no stamp on the pile side of the blade. I noticed several pictures on the web showed this pattern with USCG markings. Were there military and civilian productions of this pattern during the era indicated?
Thanks for any info on this pattern!
Treefarmer
Re: Single blade Saturday
Posted: Sun May 24, 2026 12:20 am
by Froe
Celebrated this rainy Single Blade Saturday by rehandling this worn little Utica keychain knife for giggles. Had to oversized the pins because the pivot hole was wallowed out.
Froe