All About Pocket Knives

This little fellas in my pocket on tonights shift

zed6309 wrote: ↑Thu Mar 04, 2021 6:30 pm This little fellas in my pocket on tonights shift
IMG_20210304_180542_677.jpg

Beautiful Paul! That green is just stunning!

Montanaman wrote: ↑Thu Mar 04, 2021 2:15 pm Carrying this personal carry that Claudio made for me,

aapk3421.jpg

My goodness me, Mr. Kris .

I have only 1 knife, in my entire collection, that's even in the same realm... Even then, It doesn't hold a stick to yours. When one see's that stamp, one knows your in the big leagues now.

Madmarco wrote: ↑Thu Mar 04, 2021 4:43 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 4:28 am Dang gents.
Some mighty fine cutlery, getting pocket time today, mighty fine.


Sharpened up, ready to work.

Great choices Willy! I see you keep your Q.R. oil close by, also a great choice!

Thank you Markie, it tis simple, but gets the job done.

That ez-lap was a gift from a friend, awesome tool! Problem is now, I need to get the whole set... You know these "first world" problems, we knife addicts have, 'eh Mark.

Madmarco wrote: ↑Thu Mar 04, 2021 6:35 pm

zed6309 wrote: ↑Thu Mar 04, 2021 6:30 pm This little fellas in my pocket on tonights shift
IMG_20210304_180542_677.jpg

Beautiful Paul! That green is just stunning!

Yesir Markie, that green is an eye grabber Mr. Paul, my kinda knife.
Oh yes, we are both in the same boat, you and me, we loooooove case pocketworn.

WillyCamaro wrote: ↑Thu Mar 04, 2021 7:34 pm

Madmarco wrote: ↑Thu Mar 04, 2021 4:43 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 4:28 am Dang gents.
Some mighty fine cutlery, getting pocket time today, mighty fine.


Sharpened up, ready to work.

Great choices Willy! I see you keep your Q.R. oil close by, also a great choice!

Thank you Markie, it tis simple, but gets the job done.

That ez-lap was a gift from a friend, awesome tool! Problem is now, I need to get the whole set... You know these "first world" problems, we knife addicts have, 'eh Mark.

I hear ya, 'eh Willy! Please don't start with the 'eh, before ya know it people will be calling us "Bob n' Doug", 'eh!!! LOL!(sorta)

Madmarco wrote: ↑Thu Mar 04, 2021 7:47 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 7:34 pm

Madmarco wrote: ↑Thu Mar 04, 2021 4:43 pm
Great choices Willy! I see you keep your Q.R. oil close by, also a great choice!

Thank you Markie, it tis simple, but gets the job done.

That ez-lap was a gift from a friend, awesome tool! Problem is now, I need to get the whole set... You know these "first world" problems, we knife addicts have, 'eh Mark.

I hear ya, 'eh Willy! Please don't start with the 'eh, before ya know it people will be calling us "Bob n' Doug"!!! LOL!(sorta)

Hey, why not mate?! It would be fun, I've been called Jason a few times in my life...

WillyCamaro wrote: ↑Thu Mar 04, 2021 7:51 pm

Madmarco wrote: ↑Thu Mar 04, 2021 7:47 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 7:34 pm

Thank you Markie, it tis simple, but gets the job done.

That ez-lap was a gift from a friend, awesome tool! Problem is now, I need to get the whole set... You know these "first world" problems, we knife addicts have, 'eh Mark.

I hear ya, 'eh Willy! Please don't start with the 'eh, before ya know it people will be calling us "Bob n' Doug"!!! LOL!(sorta)

Hey, why not mate?! It would be fun, I've been called Jason a few times in my life...

What's the "Jason" connection?

Madmarco wrote: ↑Thu Mar 04, 2021 7:53 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 7:51 pm

Madmarco wrote: ↑Thu Mar 04, 2021 7:47 pm
I hear ya, 'eh Willy! Please don't start with the 'eh, before ya know it people will be calling us "Bob n' Doug"!!! LOL!(sorta)

Hey, why not mate?! It would be fun, I've been called Jason a few times in my life...

What's the "Jason" connection?

A bit of a story mate, for another time. Too busy at the moment to yack much.

Couple Camillus knives today. The Sword Brand Cattle knife has been rode hard and put away wet. I'm slowly bringing it back to working order.

DM11 wrote: ↑Thu Mar 04, 2021 10:16 pm Couple Camillus knives today. The Sword Brand Cattle knife has been rode hard and put away wet. I'm slowly bringing it back to working order.

Nice bone on the SB Cattle knife David!!
John

David that is quite a pair I went with Craftsman again today at work

1973 Case #6392 Large Stockman with CV & bone

geocash wrote: ↑Fri Mar 05, 2021 1:12 am 1973 Case #6392 Large Stockman with CV & bone

Nice 92 Geo!! Love a 92!!

Thanks woodwalker. It’s rather new to me but I’m really happy with it.

DM11 wrote: ↑Thu Mar 04, 2021 10:16 pm Couple Camillus knives today. The Sword Brand Cattle knife has been rode hard and put away wet. I'm slowly bringing it back to working order.

A great looking pair of knives! What year was that Camillus made about would you say, if you were to guess?

Carrying the Ol' Camillus #1 today.

Madmarco wrote: ↑Thu Mar 04, 2021 6:35 pm

zed6309 wrote: ↑Thu Mar 04, 2021 6:30 pm This little fellas in my pocket on tonights shift
IMG_20210304_180542_677.jpg

Beautiful Paul! That green is just stunning!

Cheers mate I really like the Green apple

Today's carry a red bone Case 6344

Thank you John and garddog56.

GSPTOPDOG I'm guessing pre WWII or shortly there after as it has brass liners and a four line tang stamp on the pile side of the master blade.

geocash wrote: ↑Fri Mar 05, 2021 1:12 am 1973 Case #6392 Large Stockman with CV & bone

John

GSPTOPDOG wrote: ↑Fri Mar 05, 2021 4:29 am Carrying the Ol' Camillus #1 today.

Nice short line #1 ,don’t see many from that period that aren’t used up

This one is trying to earn its patina today.

Colonel26 wrote: ↑Fri Mar 05, 2021 1:49 pm 3A490D5A-2B7A-4C3C-9678-FEAC2A69CD86.jpeg

This one is trying to earn its patina today.

Nice one Wade!

I've had this one since Dec. and I'm just getting the patina started from honest use.

Case 2018 3137CV carbon steel Sodbuster Jr. One of the few smaller knives that can take on the big jobs as well. I bought this one to try since my Tractor Supply didn't have the big one, but I'm still really impressed by a rather small 3 5/8 closed knife (at least when comparing to a regular Sodbuster, but this size is normal for me). Case's CV is a really good carbon steel. This knife has, with just occasional stropping on a chunk of an old belt, maintained its shaving sharp edge. I bought a lockback Bear-made Moore Maker, and it's already needed resharpening twice with less use despite both being 1095 on paper.

Nice totes fellers! I am pocketing this 6318 today.