Page 14 of 26
Re: wirejacks
Posted: Mon May 25, 2020 4:10 pm
by bill schrade
Hi guys,
FYI those copper blades were made of Beryllium Copper. It was also used to make the springs in automatic knives. Beryllium dust is a known carcinogen and causes damage to lungs, liver and kidneys. It's safe in solid state. Blades of Beryllium Copper and Brass were used in the blasting field as they didn't spark causing an accidental explosion.
Re: wirejacks
Posted: Mon May 25, 2020 4:13 pm
by New_Windsor_NY
bill schrade wrote: ↑Mon May 25, 2020 4:10 pm
Hi guys,
FYI those copper blades were made of Beryllium Copper. It was also used to make the springs in automatic knives. Beryllium dust is a known carcinogen and causes damage to lungs, liver and kidneys. It's safe in solid state. Blades of Beryllium Copper and Brass were used in the blasting field as they didn't spark causing an accidental explosion.
Thank you for the information.

Maybe some day I'll find one.
Re: wirejacks
Posted: Mon May 25, 2020 7:45 pm
by joeradza
bill schrade wrote: ↑Mon May 25, 2020 4:10 pm
Hi guys,
FYI those copper blades were made of Beryllium Copper. It was also used to make the springs in automatic knives. Beryllium dust is a known carcinogen and causes damage to lungs, liver and kidneys. It's safe in solid state. Blades of Beryllium Copper and Brass were used in the blasting field as they didn't spark causing an accidental explosion.
Thanks Bill. They are certainly one of the most unique knives in an already unique design.
Re: wirejacks
Posted: Tue May 26, 2020 2:15 pm
by joeradza
I’m just an average sharpener but that usually is more than adequate. But this one I managed to get scary sharp.
Re: wirejacks
Posted: Tue May 26, 2020 5:53 pm
by New_Windsor_NY
joeradza wrote: ↑Tue May 26, 2020 2:15 pm
I’m just an average sharpener but that usually is more than adequate. But this one I managed to get scary sharp.
Sometimes I think these knives look better without the spacer/guard.
Looks good joeradza.

Re: wirejacks
Posted: Tue May 26, 2020 6:17 pm
by joeradza
New_Windsor_NY wrote: ↑Tue May 26, 2020 5:53 pm
joeradza wrote: ↑Tue May 26, 2020 2:15 pm
I’m just an average sharpener but that usually is more than adequate. But this one I managed to get scary sharp.
Sometimes I think these knives look better without the spacer/guard.
Looks good joeradza.
You're right Skip. The color cheapens the look. But we like to collect the most mint we can find, so red it is. Do you know if the small hawkbills with the different color guards and blade etch were special orders? A few more questions. Do you know if there is any idea of how many were made and what they originally sold for? And, have you eve td seen a copy of the book George Schrade and what he meant to the industry? As you can tell I'm stuck at home and bored stiff.
Re: wirejacks
Posted: Tue May 26, 2020 9:21 pm
by New_Windsor_NY
joeradza wrote: ↑Tue May 26, 2020 6:17 pm
New_Windsor_NY wrote: ↑Tue May 26, 2020 5:53 pm
joeradza wrote: ↑Tue May 26, 2020 2:15 pm
I’m just an average sharpener but that usually is more than adequate. But this one I managed to get scary sharp.
Sometimes I think these knives look better without the spacer/guard.
Looks good joeradza.
You're right Skip. The color cheapens the look. But we like to collect the most mint we can find, so red it is. Do you know if the small hawkbills with the different color guards and blade etch were special orders? A few more questions. Do you know if there is any idea of how many were made and what they originally sold for? And, have you eve td seen a copy of the book George Schrade and what he meant to the industry? As you can tell I'm stuck at home and bored stiff.
I'll answer your questions one at a time. Hawkbills with different color guards and blade etch as special orders, I have no idea. I don't know how many were made or what they originally sold for. I have not seen a copy of the George Schrade book. Sorry, I know you expected answers, I have none.
Re: wirejacks
Posted: Tue May 26, 2020 9:52 pm
by joeradza
New_Windsor_NY wrote: ↑Tue May 26, 2020 9:21 pm
joeradza wrote: ↑Tue May 26, 2020 6:17 pm
New_Windsor_NY wrote: ↑Tue May 26, 2020 5:53 pm
Sometimes I think these knives look better without the spacer/guard.
Looks good joeradza.
You're right Skip. The color cheapens the look. But we like to collect the most mint we can find, so red it is. Do you know if the small hawkbills with the different color guards and blade etch were special orders? A few more questions. Do you know if there is any idea of how many were made and what they originally sold for? And, have you eve td seen a copy of the book George Schrade and what he meant to the industry? As you can tell I'm stuck at home and bored stiff.
I'll answer your questions one at a time. Hawkbills with different color guards and blade etch as special orders, I have no idea. I don't know how many were made or what they originally sold for. I have not seen a copy of the George Schrade book. Sorry, I know you expected answers, I have none.
I only expected a reply. If you had the answers to those questions I would've asked for the winning lottery numbers too. Lol. I'd like to get the book but I haven't had any luck. Stay safe.
Re: wirejacks
Posted: Wed May 27, 2020 3:20 pm
by New_Windsor_NY
This morning, this knife got added to the collection. It's a GEO SCHRADE, single blade/fish scaler, wire handle pocket knife. This one has two tang stamps. It required very little cleaning. I took some pictures and here it is.
Re: wirejacks
Posted: Wed May 27, 2020 4:41 pm
by joeradza
New_Windsor_NY wrote: ↑Wed May 27, 2020 3:20 pm
This morning, this knife got added to the collection. It's a GEO SCHRADE, single blade/fish scaler, wire handle pocket knife. This one has two tang stamps. It required very little cleaning. I took some pictures and here it is.
Good one Skip.
Re: wirejacks
Posted: Wed May 27, 2020 4:58 pm
by New_Windsor_NY
joeradza wrote: ↑Wed May 27, 2020 4:41 pm
New_Windsor_NY wrote: ↑Wed May 27, 2020 3:20 pm
This morning, this knife........
Good one Skip.
Thank you joeradza.

Re: wirejacks
Posted: Wed May 27, 2020 10:45 pm
by BWT
Very nice Skip

Re: wirejacks
Posted: Wed May 27, 2020 11:35 pm
by New_Windsor_NY
BWT wrote: ↑Wed May 27, 2020 10:45 pm
Very nice Skip
Thank you Bill.

Re: wirejacks
Posted: Thu May 28, 2020 1:53 am
by doglegg
Knice fish knife.

Re: wirejacks
Posted: Thu May 28, 2020 2:25 am
by New_Windsor_NY
doglegg wrote: ↑Thu May 28, 2020 1:53 am
Knice fish knife.
Thank you Floyd.

Re: wirejacks
Posted: Tue Jun 02, 2020 7:12 pm
by New_Windsor_NY
This morning, this knife arrived and became the latest addition to my wire jack collection. It's a GEO SCHRADE, single blade, wire handle pocket knife. This knife has two tang stamps. It didn't need any cleaning at all. I took some pictures and here is the knife.
Re: wirejacks
Posted: Tue Jun 02, 2020 10:02 pm
by BWT
Very nice Skip

Re: wirejacks
Posted: Wed Jun 03, 2020 1:57 am
by New_Windsor_NY
BWT wrote: ↑Tue Jun 02, 2020 10:02 pm
Very nice Skip
Thank you Bill.

Re: wirejacks
Posted: Fri Jun 05, 2020 1:17 am
by New_Windsor_NY
I just obtained this scout style, utensil kit for best offer. I normally don't bid on or buy these kits, unless there's a knife I need. I'm not sure about the date(s) on the knife and fork. This is NOT meant in a nasty way, here is the seller's description.
"Here We Have A Vintage Pouch Made from Pigskin Chow Kit With Wire Frame Folding Fork, Knife And Simpson Nickel Silver Spoon. Have Seen Several of These Wire Frame Knives Most Are Marked Geo. Schrade These Are Only Marked With A Patent Date Of (Very Hard To Read So Guessing A Little Bit) 3-31-35 .Utensils Are All In Good Condition Could Use A Good Cleaning And Polish If So Desired And Pouch Is Dry Needs Oil. Please Let Our Pictures Be The Best Description Of This Item. Please Continue To Visit Our Listings And Please Remember We Always Combine Shipping. If You Have Questions On This Or Any Of Our Items Please Ask."
I don't think I've ever seen ANY of these types of knives, I don't know about the forks, stamped with a 1935 patent date. The tang stamp on the knife looks like one that I don't have. I can't wait to get this utensil kit!
Re: wirejacks
Posted: Sat Jun 06, 2020 8:48 pm
by Papa Bones
New_Windsor_NY wrote: ↑Fri Jun 05, 2020 1:17 am
I just obtained this scout style, utensil kit for best offer. I normally don't bid on or buy these kits, unless there's a knife I need. I'm not sure about the date(s) on the knife and fork. This is NOT meant in a nasty way, here is the seller's description.
"Here We Have A Vintage Pouch Made from Pigskin Chow Kit With Wire Frame Folding Fork, Knife And Simpson Nickel Silver Spoon. Have Seen Several of These Wire Frame Knives Most Are Marked Geo. Schrade These Are Only Marked With A Patent Date Of (Very Hard To Read So Guessing A Little Bit) 3-31-35 .Utensils Are All In Good Condition Could Use A Good Cleaning And Polish If So Desired And Pouch Is Dry Needs Oil. Please Let Our Pictures Be The Best Description Of This Item. Please Continue To Visit Our Listings And Please Remember We Always Combine Shipping. If You Have Questions On This Or Any Of Our Items Please Ask."
I don't think I've ever seen ANY of these types of knives, I don't know about the forks, stamped with a 1935 patent date. The tang stamp on the knife looks like one that I don't have. I can't wait to get this utensil kit!
Wow.......Just Wow. Dang Skip, I just finished going through the last 5 pages I've missed since I've been out taking care of business. Between you, Joeradza , You guys have been finding some nice ones.

Re: wirejacks
Posted: Sun Jun 07, 2020 12:11 am
by New_Windsor_NY
Papa Bones wrote: ↑Sat Jun 06, 2020 8:48 pm
New_Windsor_NY wrote: ↑Fri Jun 05, 2020 1:17 am
I just obtained this scout style, utensil kit.....
Wow.......Just Wow. Dang Skip, I just finished going through the last 5 pages I've missed since I've been out taking care of business. Between you, Joeradza , You guys have been finding some nice ones.
Thank you Smitty.

Re: wirejacks
Posted: Sun Jun 07, 2020 12:57 am
by doglegg
Cool pick up Skip. I'll have to dig mine out and see how it is stamped. I know there is nothing on my spoon.

Re: wirejacks
Posted: Sun Jun 07, 2020 1:03 am
by New_Windsor_NY
doglegg wrote: ↑Sun Jun 07, 2020 12:57 am
Cool pick up Skip. I'll have to dig mine out and see how it is stamped. I know there is nothing on my spoon.
Thank you Floyd.

The spoon(s) I am not concerned about at all. I've only seen the knives and forks with dates. The dates are usually 1926 & 1942. I don't know about 1935, but I'll see when it gets here.
***** UPDATE *****
As of the time on this post, the utensil kit is in Kansas City, Kansas. It's "expected" to be here this Wednesday, the 10th. I do not have my hopes up for a 1935 patent date on either the knife, the fork, or on both.
Re: wirejacks
Posted: Wed Jun 10, 2020 4:20 pm
by New_Windsor_NY
This morning, this knife joins my collection. It is an unbranded, single blade, wire handle pocket knife. More than likely, a GEO SCHRADE. This knife came out of the scout style, utensil kit, that I bought last week (a few posts above this one). The seller thought it might have a 1935 patent date, it doesn't, it has a 1926 patent date. It didn't require much cleanIng. I took pictures, here it is.
Re: wirejacks
Posted: Wed Jun 10, 2020 4:50 pm
by doglegg
Cool Skip, sorry it didn't have an unusual date. I checked mine and it has the 1942 date.