Page 125 of 130

Re: My latest Schrade

Posted: Mon Sep 05, 2022 4:25 pm
by Lama
Here's an interesting variant of the 194OT I grabbed a couple of months ago. I'm wondering if anyone has seen one of these before and knows when or if it was produced for sale. My web searches have shown no results.

Re: My latest Schrade

Posted: Mon Sep 05, 2022 5:40 pm
by tongueriver
I believe that it has been modified by an owner or acquaintance.

Re: My latest Schrade

Posted: Mon Sep 05, 2022 6:56 pm
by Lama
What, You mean it's not an ultra rare Easy Opener Gunstock Trapper for those who have bitten their thumbnails to the quick? I do have to say, whoever did the mod did a clean job. ::woot:: ::shrug:: ::woot:: ::uc::

Re: My latest Schrade

Posted: Mon Sep 05, 2022 9:04 pm
by DanTX1953
Just picked up this Schrade 735 to add to my marlin spike collection I am putting together.
I believe the knife was produced in the early '70's (but I am still doing research to be sure)

Re: My latest Schrade

Posted: Mon Sep 05, 2022 9:08 pm
by tongueriver
Schrade stopped using their WALDEN tang stamp pretty much sometime in the year 1973.

Re: My latest Schrade

Posted: Mon Sep 05, 2022 9:26 pm
by DanTX1953
tongueriver wrote: Mon Sep 05, 2022 9:08 pm Schrade stopped using their WALDEN tang stamp pretty much sometime in the year 1973.
Thank you for that info, I was able to download a series of Schrade / Schrade Walden catalogs by year - it appears that the 735 switched from a wire type bail to a spike locking bail around 1961. So my knife could be quit a bit older than I first thought.

Re: My latest Schrade

Posted: Mon Sep 05, 2022 9:34 pm
by tongueriver
I haven't followed this pattern but perhaps someone else will chime in. The first Delrin factory in the world was built in 1960. By 1962 many knife manufacturers were using this plastic as covers. If the word WALDEN does not appear on the tang of the knife it was manufactured in 1973 or later.

Re: My latest Schrade

Posted: Mon Sep 05, 2022 10:13 pm
by DanTX1953
tongueriver wrote: Mon Sep 05, 2022 9:34 pm I haven't followed this pattern but perhaps someone else will chime in. The first Delrin factory in the world was built in 1960. By 1962 many knife manufacturers were using this plastic as covers. If the word WALDEN does not appear on the tang of the knife it was manufactured in 1973 or later.
thanks for the info/update

Re: My latest Schrade

Posted: Thu Oct 06, 2022 9:30 pm
by New_Windsor_NY
Very recently, this pocket knife arrived and it now becomes the latest example to join this topic or thread and to join my general pocket knife collection. It came in a very large group or lot of pocket knives that I bought. I was and am delighted to have it, but I did not buy the group or lot for this particular pocket knife. It is a SCHRADE, 8OT, three blades, one tang stamp, 3 15/16" closed, advertising or commemorative, stockman style pocket knife. The main blade front tang stamp says "SCHRADE (over) U.S.A. 8OT" The main handle side says "INGERSOLL RAND - 125 YEARS OF QUALITY & - PERFORMANCE" with an 1871 - 125 - 1996 shield. The other handle side says "THE CLASSIC - IR231" and "THE CLASSIC IR231 - THE GOLD STANDARD - FOR 25 YEARS" It is numbered 08379 on the bolster. According to Jason (jxr1197), in a previous post (with a picture) under this topic or thread, these pocket knives were packaged with a special edition impact gun. It is in EXCELLENT condition. This pocket knife needed absolutely no cleaning at all. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: My latest Schrade

Posted: Fri Oct 07, 2022 11:28 am
by Meridian_Mike
That is a good one Skip!
I THINK I might have one of those also.

Every time I find a variation of the 8OT or the 34OT I try to add it to my collection.
You gotta love those Old Timers!

::tu::

Re: My latest Schrade

Posted: Fri Oct 07, 2022 2:02 pm
by New_Windsor_NY
Meridian_Mike wrote: Fri Oct 07, 2022 11:28 am That.....:
Thank you, Mike. 🍻
If you still have it, you posted your Ingersoll Rand 8OT, under this
topic or thread, back on Monday, September 27, 2021. ::tu:: ::tu::

Re: My latest Schrade

Posted: Fri Oct 07, 2022 6:02 pm
by Meridian_Mike
Yep.... still have it.

:D

Re: My latest Schrade

Posted: Fri Oct 07, 2022 8:40 pm
by CluelessNick
Got this nice Schrade 893 off Ebay the other day. Didn't even know an 893 existed. Very nice condition.

Re: My latest Schrade

Posted: Fri Oct 07, 2022 8:44 pm
by tongueriver
Dale Vincent spent a lot of time and effort to compile a research list of Schrade patterns. Go to Research at the top of your page and scroll down to Schrade catalog lists of patterns and their descriptions.
You can also spend a few weeks here:
http://www.collectors-of-schrades-r.us/

Re: My latest Schrade

Posted: Thu Apr 20, 2023 8:53 pm
by Vit_213
X-Timer XT7B

Re: My latest Schrade

Posted: Thu Apr 20, 2023 10:29 pm
by koldgold
I like that X-Timer,
Schrade was starting to produce some good work / user knives from 2000-2004.
I do not have one of those... Ken.

Re: My latest Schrade

Posted: Fri Apr 28, 2023 7:45 am
by koldgold
Between 2000 and 2003, Schrade started to make some nice tools.

Re: My latest Schrade

Posted: Sat May 20, 2023 1:48 am
by galvanic1882
My latest pickup

Re: My latest Schrade

Posted: Sat May 20, 2023 1:51 am
by tongueriver
Beautiful, Mike!

Re: My latest Schrade

Posted: Sat May 20, 2023 3:23 am
by Ivoryman
galvanic1882 wrote: Sat May 20, 2023 1:48 am My latest pickup
Gorgeous bone and condition. Love the salesman sample ink still on the blade and the jigging rocks. Kiiiiiiiiiiilleeeeeeeeeeeeeeeeeeeeeeer. ::tu:: ::tu:: ::tu::

Re: My latest Schrade

Posted: Sat May 20, 2023 9:25 am
by Dan In MI
What a great pick-up!

Re: My latest Schrade

Posted: Sat May 20, 2023 11:55 am
by royal0014
Gorgeous ol' SCC !!!!!
::ds::

Congrats on a fine pick

Re: My latest Schrade

Posted: Sat May 20, 2023 10:05 pm
by Duffer
Outstanding Mike ::nod::

Re: My latest Schrade

Posted: Sat May 20, 2023 11:08 pm
by stockman
Great old knife!! Harold

Re: My latest Schrade

Posted: Sun May 21, 2023 11:43 am
by galvanic1882
Thanks guys ::tu:: ::tu::